updated tulip workqueue patch

index 683f14b..ffba0c1 100644
@@ -26,9 +26,9 @@ static u16 t21142_csr15[] = { 0x0008, 0x
 
 /* Handle the 21143 uniquely: do autoselect with NWay, not the EEPROM list
    of available transceivers.  */
-void t21142_timer(unsigned long data)
+void t21142_media_task(void *data)
 {
-	struct net_device *dev = (struct net_device *)data;
+	struct net_device *dev = data;
 	struct tulip_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->base_addr;
 	int csr12 = ioread32(ioaddr + CSR12);

index f53396f..75c7659 100644
@@ -44,8 +44,10 @@ static const unsigned char comet_miireg2
 
 /* MII transceiver control section.
    Read and write the MII registers using software-generated serial
-   MDIO protocol.  See the MII specifications or DP83840A data sheet
-   for details. */
+   MDIO protocol.
+   See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions")
+   or DP83840A data sheet for more details.
+   */
 
 int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
 {

@@ -261,24 +263,56 @@ void tulip_select_media(struct net_devic
 				u16 *reset_sequence = &((u16*)(p+3))[init_length];
 				int reset_length = p[2 + init_length*2];
 				misc_info = reset_sequence + reset_length;
-				if (startup)
+				if (startup) {
+					int timeout = 10;	/* max 1 ms */
 					for (i = 0; i < reset_length; i++)
 						iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15);
+				
+					/* flush posted writes */
+					ioread32(ioaddr + CSR15);
+
+					/* Sect 3.10.3 in DP83840A.pdf (p39) */
+					msleep(1);
+
+					/* Section 4.2 in DP83840A.pdf (p43) */
+					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
+					while (timeout-- &&
+						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
+						msleep(1);
+				}
 				for (i = 0; i < init_length; i++)
 					iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15);
+
+				ioread32(ioaddr + CSR15);	/* flush posted writes */
 			} else {
 				u8 *init_sequence = p + 2;
 				u8 *reset_sequence = p + 3 + init_length;
 				int reset_length = p[2 + init_length];
 				misc_info = (u16*)(reset_sequence + reset_length);
 				if (startup) {
+					int timeout = 10;	/* max 1 ms */
 					iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
 					for (i = 0; i < reset_length; i++)
 						iowrite32(reset_sequence[i], ioaddr + CSR12);
+
+					/* flush posted writes */
+					ioread32(ioaddr + CSR12);
+
+					/* Sect 3.10.3 in DP83840A.pdf (p39) */
+					msleep(1);
+
+					/* Section 4.2 in DP83840A.pdf (p43) */
+					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
+					while (timeout-- &&
+						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
+						msleep(1);
 				}
 				for (i = 0; i < init_length; i++)
 					iowrite32(init_sequence[i], ioaddr + CSR12);
+
+				ioread32(ioaddr + CSR12);	/* flush posted writes */
 			}
+
 			tmp_info = get_u16(&misc_info[1]);
 			if (tmp_info)
 				tp->advertising[phy_num] = tmp_info | 1;

index e058a9f..272ef62 100644
@@ -18,13 +18,14 @@
 #include "tulip.h"
 
 
-void tulip_timer(unsigned long data)
+void tulip_media_task(void *data)
 {
-	struct net_device *dev = (struct net_device *)data;
+	struct net_device *dev = data;
 	struct tulip_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->base_addr;
 	u32 csr12 = ioread32(ioaddr + CSR12);
 	int next_tick = 2*HZ;
+	unsigned long flags;
 
 	if (tulip_debug > 2) {
 		printk(KERN_DEBUG "%s: Media selection tick, %s, status %8.8x mode"

@@ -126,6 +127,15 @@ void tulip_timer(unsigned long data)
 	}
 	break;
 	}
+
+
+	spin_lock_irqsave(&tp->lock, flags);
+	if (tp->timeout_recovery) {
+		tulip_tx_timeout_complete(tp, ioaddr);
+		tp->timeout_recovery = 0;
+	}
+	spin_unlock_irqrestore(&tp->lock, flags);
+
 	/* mod_timer synchronizes us with potential add_timer calls
 	 * from interrupts.
 	 */

index 05d2d96..c35ccf4 100644
@@ -46,6 +46,7 @@ struct tulip_chip_table {
 	int valid_intrs;	/* CSR7 interrupt enable settings */
 	int flags;
 	void (*media_timer) (unsigned long data);
+	void (*media_task) (void *);
 };
 
 

@@ -367,6 +368,7 @@ struct tulip_private {
 	unsigned int medialock:1;	/* Don't sense media type. */
 	unsigned int mediasense:1;	/* Media sensing in progress. */
 	unsigned int nway:1, nwayset:1;		/* 21143 internal NWay. */
+	unsigned int timeout_recovery:1;
 	unsigned int csr0;	/* CSR0 setting. */
 	unsigned int csr6;	/* Current CSR6 control settings. */
 	unsigned char eeprom[EEPROM_SIZE];	/* Serial EEPROM contents. */

@@ -385,6 +387,7 @@ struct tulip_private {
 	void __iomem *base_addr;
 	int csr12_shadow;
 	int pad0;		/* Used for 8-byte alignment */
+	struct work_struct media_work;
 };
 
 

@@ -399,7 +402,7 @@ struct eeprom_fixup {
 
 /* 21142.c */
 extern u16 t21142_csr14[];
-void t21142_timer(unsigned long data);
+void t21142_media_task(void *data);
 void t21142_start_nway(struct net_device *dev);
 void t21142_lnk_change(struct net_device *dev, int csr5);
 

@@ -437,7 +440,7 @@ void pnic_lnk_change(struct net_device *
 void pnic_timer(unsigned long data);
 
 /* timer.c */
-void tulip_timer(unsigned long data);
+void tulip_media_task(void *data);
 void mxic_timer(unsigned long data);
 void comet_timer(unsigned long data);
 

@@ -486,4 +489,14 @@ static inline void tulip_restart_rxtx(st
 	tulip_start_rxtx(tp);
 }
 
+static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr)
+{
+	/* Stop and restart the chip's Tx processes. */
+	tulip_restart_rxtx(tp);
+	/* Trigger an immediate transmit demand. */
+	iowrite32(0, ioaddr + CSR1);
+
+	tp->stats.tx_errors++;
+}
+
 #endif /* __NET_TULIP_H__ */

176 lines not on this page · raw message