MMC drivers for 2.6 collie
Hi!
I've tried searching sharp patches for MMC support, but could not find it. Or should MMC_ARMMMCI work on collie?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 2 lines · Pavel Machek
I've tried searching sharp patches for MMC support, but could not find it. Or should
MMC_ARMMMCIwork on collie?
Sharp's 2.4 MMC/SD drivers were binary only for all Zaurus models. Since we have documentation on the PXA, a 2.6 driver exists and works for all PXA models as we could guess the power controls and GPIOs. Collie (SA1100 based) used some kind of SPI interface through the LOCOMO chip (as far as I know) which we have no documentation on.
Signature · 1 line
Richard
Hi!
Quoted 8 lines
Quoted 2 lines
I've tried searching sharp patches for MMC support, but could not find it. Or should
MMC_ARMMMCIwork on collie?Sharp's 2.4 MMC/SD drivers were binary only for all Zaurus models. Since we have documentation on the PXA, a 2.6 driver exists and works for all PXA models as we could guess the power controls and GPIOs. Collie (SA1100 based) used some kind of SPI interface through the LOCOMO chip (as far as I know) which we have no documentation on.
I thought we had completely open-source version at one point?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 5 lines · Pavel Machek
Hi!
Quoted 3 lines
Quoted 2 lines
I've tried searching sharp patches for MMC support, but could not find it. Or should
MMC_ARMMMCIwork on collie?
Quoted 7 lines
Quoted 5 lines
Sharp's 2.4 MMC/SD drivers were binary only for all Zaurus models. Since we have documentation on the PXA, a 2.6 driver exists and works for all PXA models as we could guess the power controls and GPIOs. Collie (SA1100 based) used some kind of SPI interface through the LOCOMO chip (as far as I know) which we have no documentation on.
I thought we had completely open-source version at one point?
No, not for the MMC on collie. At least, the patch to the 2.4 kernel which I based my 2.6 code on did not have any MMC parts, and the openzaurus distro at the time still included the binary module in the rom.
IIRC, Chris Larson signed a NDA and got the specs for the MMC device on collie to develop it for 2.6, but I don't think anything ever came of it. I also might be remembering he signed a NDA for some other component, but I think it was the MMC device. Also, the poodle and collie used different device controllers, so the work will not transfer over. :(
John
Quoted 19 lines · John Lenz
Quoted 5 lines · Pavel Machek
Hi!
Quoted 3 lines
Quoted 2 lines
I've tried searching sharp patches for MMC support, but could not find it. Or should
MMC_ARMMMCIwork on collie?Quoted 7 lines
Quoted 5 lines
Sharp's 2.4 MMC/SD drivers were binary only for all Zaurus models. Since we have documentation on the PXA, a 2.6 driver exists and works for all PXA models as we could guess the power controls and GPIOs. Collie (SA1100 based) used some kind of SPI interface through the LOCOMO chip (as far as I know) which we have no documentation on.
I thought we had completely open-source version at one point?
No, not for the MMC on collie. At least, the patch to the 2.4 kernel which I based my 2.6 code on did not have any MMC parts, and the openzaurus distro at the time still included the binary module in the rom.
Quoted 6 lines
IIRC, Chris Larson signed a NDA and got the specs for the MMC device on collie to develop it for 2.6, but I don't think anything ever came of it. I also might be remembering he signed a NDA for some other component, but I think it was the MMC device. Also, the poodle and collie used different device controllers, so the work will not transfer over. :(
Bad... I need CF slot for bluetooth card, and 14MB is not really enough memory. I guess there's no reasonable way to "split" CF slot in two?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 5 lines · Pavel Machek
[...]
Bad... I need CF slot for bluetooth card, and 14MB is not really enough memory. I guess there's no reasonable way to "split" CF slot in two?
For 802.11b (and not Bluetooth) you have this:
I think this is not manufactured anymore and I've never tried one myself. I just wanted to point out that there is actually a way to "split" a CF slot in two ;)
Signature · 4 lines
Paulo Marques - www.grupopie.com
Pointy-Haired Boss: I don't see anything that could stand in our way.
Dilbert: Sanity? Reality? The laws of physics?