genirq: add SA_TRIGGER support
PATCH 24/50 genirq: add SA_TRIGGER support
From: Thomas Gleixner <[email protected]>
enable drivers to request an IRQ with a given irq-flow (trigger/polarity) setting.
Signed-off-by Thomas Gleixner <[email protected]>
Signed-off-by Ingo Molnar <[email protected]>
--- kernel/irq/manage.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
kernel/irq/manage.c +13 -2
@@ -214,8 +214,14 @@ int setup_irq(unsigned int irq, struct i p = &desc->action; old = *p;if (old) { -/* Can't share interrupts unless both agree to */ -if (!(old->flags & new->flags &SA_SHIRQ )) +/* +* Can't share interrupts unless both agree to and are +* the same type (level, edge, polarity). So both flag +* fields must have SA_SHIRQ set and the bits which +* set the trigger type must match. +*/ +if (!((old->flags & new->flags) &SA_SHIRQ ) || + ((old->flags ^ new->flags) &SA_TRIGGER_MASK )) goto mismatch;#if defined(CONFIG_IRQ_PER_CPU ) && defined(SA_PERCPU_IRQ )
@@ -238,6 +244,11 @@ int setup_irq(unsigned int irq, struct i desc->status |=IRQ_PER_CPU ;#endif if (!shared) { +/* Setup the type (level, edge polarity) if configured: */ +if (new->flags &SA_TRIGGER_MASK && desc->handler->set_type) + desc->handler->set_type (irq, + new->flags &SA_TRIGGER_MASK ); + desc->status &= ~(IRQ_AUTODETECT |IRQ_WAITING |IRQ_INPROGRESS );