usb/media/quickcam_messenger driver v4
PATCH 1/1 usb/media/quickcam_messenger driver v4
Hi Greg KH, USB folk, kernel folk,
Appended is v4 of my patch adding a usbvideo driver for the Logitech Quickcam Messenger USB webcam. This patch has been rebased against 2.6.17-rc4 as per Greg's feedback.
Please let me know if it looks okay and if you have any feedback or suggestions.
Thanks,
Jaya Kumar
Signed-off-by Jaya Kumar <[email protected]>
---
Kconfig | 12 Makefile | 1 quickcam_messenger.c | 1120 +++++++++++++++++++++++++++++++++++++++++++++++++++ quickcam_messenger.h | 126 +++++ 4 files changed, 1259 insertions(+)
---
drivers/media/video/usbvideo/Kconfig +12 -0
@@ -36,3 +36,15 @@ config USB_KONICAWC To compile this driver as a module, choose M here: the module will be called konicawc. + +config USB_QUICKCAM_MESSENGER + tristate "USB Logitech Quickcam Messenger" + depends on USB && VIDEO_DEV + select VIDEO_USBVIDEO + ---help--- + Say Y or M here to enable support for the USB Logitech Quickcam + Messenger webcam. + + To compile this driver as a module, choose M here: the + module will be called quickcam_messenger. +
drivers/media/video/usbvideo/Makefile +1 -0
@@ -2,3 +2,4 @@ obj-$(CONFIG_VIDEO_USBVIDEO) += usbvi obj-$(CONFIG_USB_IBMCAM) += ibmcam.o ultracam.o obj-$(CONFIG_USB_KONICAWC) += konicawc.o obj-$(CONFIG_USB_VICAM) += vicam.o +obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += quickcam_messenger.o
drivers/media/video/usbvideo/quickcam_messenger.c +1120 -0
1,120 lines not on this page · raw message
drivers/media/video/usbvideo/quickcam_messenger.h +126 -0
126 lines not on this page · raw message