sdpd not working on arm based linux

Bluez-users pea sen 2 participants 2 messages May 31, 2006 Bluetooth drivers

lore

Share & tools

lore

pea sen

author

2006-05-31 17:07 UTC #0 lore raw

hello,

we`re trying to integrate bluez into an arm-based embedded-linux. =

we crosscompiled the bluez-libs and utils.
everything works fine: hciconfig, hcitool, sdptool are working correctly. But when we try to start sdp-server "sdpd", nothing is done. no errormsg an= d "ps" does not list sdpd-process.
typing "sdptool browse local" result following errormsg:
Failed to connect to SDP server on FF:FF:FF:00:00:00: Address family not su= pported by protocol

we're not sure if we did everything right, but other bluez-tools working...=
so what can be there? what is missing? what does sdpd need to work and why= is no output-message there?

All hints are usefull
-- =

Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal f=FCr Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
=

_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Andreas Vedral

2006-05-31 20:40 UTC #1 lore raw

Hi, =

it seems that you don't have start the sdp data base daemon (sdpd) on your local system which handles the incoming sdp queries from other BT devices. First of all try to start the ./sdpd.

Sincerely, =

Andreas =

-----Urspr=FCngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] Im Auftrag von pea sen
Gesendet: Mittwoch, 31. Mai 2006 19:08
An: [email protected]
Betreff: [Bluez-users] sdpd not working on arm based linux

hello,

we`re trying to integrate bluez into an arm-based embedded-linux. =

we crosscompiled the bluez-libs and utils.
everything works fine: hciconfig, hcitool, sdptool are working correctly. But when we try to start sdp-server "sdpd", nothing is done. no errormsg and "ps" does not list sdpd-process.
typing "sdptool browse local" result following errormsg:
Failed to connect to SDP server on FF:FF:FF:00:00:00: Address family not supported by protocol

we're not sure if we did everything right, but other bluez-tools working... so what can be there? what is missing? what does sdpd need to work and why is no output-message there?

All hints are usefull
-- =

Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal f=FCr Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
=

_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users