Skip to contentSkip to conversation

BUG: soft lockup detected on CPU#0!

DISCUSSION Marc Koschewski 2 participants 3 messages Jun 2, 2006

lore
Share & tools
lore
#0 lore raw

Hi folks,

here what I got when I connected my mobile phone via gnome-phone-manager and a bluetooth PCMCIA adapter. The machine freezes when I connect and attached is what dmesg says after I ejected the card. The card had /dev/ttyS3 assigned and I used it as my setting in gnome-phone-manager.

[4296372.670000] BUG: soft lockup detected on CPU#0!
[4296372.670000]  [<b0138e29>] softlockup_tick+0x7e/0xbb
[4296372.670000]  [<b0120cdc>] update_process_times+0x2a/0x60
[4296372.670000]  [<b01063ec>] timer_interrupt+0x3a/0xce
[4296372.670000]  [<b0138efd>] handle_IRQ_event+0x2e/0x5a
[4296372.670000]  [<b0138fb2>] __do_IRQ+0x89/0x127
[4296372.670000]  [<b0105099>] do_IRQ+0x6f/0x8b
[4296372.670000]  [<b0103816>] common_interrupt+0x1a/0x20
[4296372.670000]  [<f8e74986>] yenta_interrupt+0x11/0xb7 [yenta_socket]
[4296372.670000]  [<b0138efd>] handle_IRQ_event+0x2e/0x5a
[4296372.670000]  [<b0138fb2>] __do_IRQ+0x89/0x127
[4296372.670000]  [<b010507d>] do_IRQ+0x53/0x8b
[4296372.670000]  =======================
[4296372.670000]  [<f9434c29>] rm_isr_bh+0x61/0x68 [nvidia]
[4296372.670000]  [<b0103816>] common_interrupt+0x1a/0x20
[4296372.670000]  [<b011cfa3>] __do_softirq+0x37/0x92
[4296372.670000]  [<b0105104>] do_softirq+0x4f/0x5b
[4296372.670000]  =======================
[4296372.670000]  [<b011d0e2>] irq_exit+0x38/0x3a
[4296372.670000]  [<b0105084>] do_IRQ+0x5a/0x8b
[4296372.670000]  [<b0103816>] common_interrupt+0x1a/0x20
[4296372.670000]  [<b023ac57>] serial_out+0x29/0x5f
[4296372.670000]  [<b023cd08>] serial8250_startup+0x18e/0x4e8
[4296372.670000]  [<b0238b9e>] uart_startup+0x3c/0x177
[4296372.670000]  [<b0238dad>] uart_open+0xd4/0x4af
[4296372.670000]  [<b0225b42>] check_tty_count+0x45/0xbb
[4296372.670000]  [<b02c28a2>] __mutex_unlock_slowpath+0xd0/0x218
[4296372.670000]  [<b022865d>] tty_open+0x163/0x328
[4296372.670000]  [<b02284fa>] tty_open+0x0/0x328
[4296372.670000]  [<b0161b32>] chrdev_open+0xed/0x1eb
[4296372.670000]  [<b01577d7>] __dentry_open+0xe4/0x252
[4296372.670000]  [<b01579d2>] nameidata_to_filp+0x31/0x3a
[4296372.670000]  [<b0161a45>] chrdev_open+0x0/0x1eb
[4296372.670000]  [<b0157a14>] do_filp_open+0x39/0x40
[4296372.670000]  [<b01576cd>] get_unused_fd+0xa7/0xcd
[4296372.670000]  [<b0157a59>] do_sys_open+0x3e/0xba
[4296372.670000]  [<b0157b10>] sys_open+0x1c/0x20
[4296372.670000]  [<b0102d87>] sysenter_past_esp+0x54/0x75
[4296382.595000] pccard: card ejected from slot 0

stiffy ~ # pccardctl info
PRODID_1="3Com"
PRODID_2="3CRWB6096B Bluetooth PC Card"
PRODID_3=""
PRODID_4=""
MANFID=0101,0041
FUNCID=2
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
stiffy ~ # pccardctl ident
Socket 0:
product info: "3Com", "3CRWB6096B Bluetooth PC Card", "", ""
manfid: 0x0101, 0x0041
function: 2 (serial)
Socket 1:
no product info available

Regards,
Marc

#1 lore raw

* Marc Koschewski <[email protected]> [2006-06-02 04:02:23 +0200]:

The kernel is a

Linux stiffy 2.6.17-rc5-marc-g705af309 #144 PREEMPT Fri May 26 11:54:39 CEST 2006 i686 Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz GNU/Linux

Same goes, however, for latest GIT. The above is about a week old or so.

Marc

#2 lore raw
In reply to Marc Koschewski
Quoted 25 lines · On Fri, 2 Jun 2006 03:02:24 +0200 Marc Koschewski <[email protected]> wrote:

here what I got when I connected my mobile phone via gnome-phone-manager and a bluetooth PCMCIA adapter. The machine freezes when I connect and attached is what dmesg says after I ejected the card. The card had /dev/ttyS3 assigned and I used it as my setting in gnome-phone-manager.

[4296372.670000] BUG: soft lockup detected on CPU#0!
[4296372.670000]  [<b0138e29>] softlockup_tick+0x7e/0xbb
[4296372.670000]  [<b0120cdc>] update_process_times+0x2a/0x60
[4296372.670000]  [<b01063ec>] timer_interrupt+0x3a/0xce
[4296372.670000]  [<b0138efd>] handle_IRQ_event+0x2e/0x5a
[4296372.670000]  [<b0138fb2>] __do_IRQ+0x89/0x127
[4296372.670000]  [<b0105099>] do_IRQ+0x6f/0x8b
[4296372.670000]  [<b0103816>] common_interrupt+0x1a/0x20
[4296372.670000]  [<f8e74986>] yenta_interrupt+0x11/0xb7 [yenta_socket]
[4296372.670000]  [<b0138efd>] handle_IRQ_event+0x2e/0x5a
[4296372.670000]  [<b0138fb2>] __do_IRQ+0x89/0x127
[4296372.670000]  [<b010507d>] do_IRQ+0x53/0x8b
[4296372.670000]  =======================
[4296372.670000]  [<f9434c29>] rm_isr_bh+0x61/0x68 [nvidia]
[4296372.670000]  [<b0103816>] common_interrupt+0x1a/0x20
[4296372.670000]  [<b011cfa3>] __do_softirq+0x37/0x92
[4296372.670000]  [<b0105104>] do_softirq+0x4f/0x5b
[4296372.670000]  =======================
[4296372.670000]  [<b011d0e2>] irq_exit+0x38/0x3a
[4296372.670000]  [<b0105084>] do_IRQ+0x5a/0x8b
Quoted 8 lines
[4296372.670000]  [<b0103816>] common_interrupt+0x1a/0x20
[4296372.670000]  [<b023ac57>] serial_out+0x29/0x5f
[4296372.670000]  [<b023cd08>] serial8250_startup+0x18e/0x4e8
[4296372.670000]  [<b0238b9e>] uart_startup+0x3c/0x177
[4296372.670000]  [<b0238dad>] uart_open+0xd4/0x4af
[4296372.670000]  [<b0225b42>] check_tty_count+0x45/0xbb
[4296372.670000]  [<b02c28a2>] __mutex_unlock_slowpath+0xd0/0x218
[4296372.670000]  [<b022865d>] tty_open+0x163/0x328

It might be a hang in rm_isr_bh(). Does the same happen if the nvidia driver is not, and has never been loaded?