Skip to contentSkip to conversation

Add v3020 RTC support

PATCH New Raphael Assenat 1 participant 1 message Jun 2, 2006 Real time clock (RTC)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add v3020 RTC support

This patch adds support for the v3020 RTC from EM Microelectronic.

The v3020 RTC is designed to be connected on a bus using only one data bit. Since any data bit may be used, it is necessary to specify this to the driver by passing a struct v3020_platform_data pointer (see include/linux/rtc-v3020.h) to the driver.

Part of the following code comes from the kernel patchs produced by Compulab for their products. The original file (available here:
http://raph.people.8d.com/misc/emv3020.c) was released under the terms of the GPL license.

---

drivers/rtc/Kconfig +10 -0
@@ -182,4 +182,14 @@
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-max6902.
 
+config RTC_DRV_V3020
+	tristate "EM Microelectronic V3020"
+	depends on RTC_CLASS
+	help
+	  If you say yes here you will get support for the
+	  EM Microelectronic v3020 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-v3020.
+
 endmenu
drivers/rtc/Makefile +1 -0
@@ -21,3 +21,4 @@
 obj-$(CONFIG_RTC_DRV_SA1100)	+= rtc-sa1100.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
+obj-$(CONFIG_RTC_DRV_V3020)		+= rtc-v3020.o
drivers/rtc/rtc-v3020.c +266 -0

266 lines not on this page · raw message

include/linux/rtc-v3020.h +35 -0
@@ -0,0 +1,35 @@
+/*
+ * v3020.h - Registers definition and platform data structure for the v3020 RTC.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 8D Technologies inc.
+ */
+#ifndef __LINUX_V3020_H
+#define __LINUX_V3020_H
+
+/* The v3020 has only one data pin but which one
+ * is used depends on the board. */
+struct v3020_platform_data {
+	int leftshift; /* (1<<(leftshift)) & readl() */
+};
+
+#define V3020_STATUS_0	0x00
+#define V3020_STATUS_1	0x01
+#define V3020_SECONDS	0x02
+#define V3020_MINUTES	0x03
+#define V3020_HOURS		0x04
+#define V3020_MONTH_DAY	0x05
+#define V3020_MONTH		0x06
+#define V3020_YEAR		0x07
+#define V3020_WEEK_DAY	0x08 
+#define V3020_WEEK		0x09
+
+#define V3020_IS_COMMAND(val) ((val)>=0x0E)
+
+#define V3020_CMD_RAM2CLOCK	0x0E
+#define V3020_CMD_CLOCK2RAM	0x0F
+
+#endif /* __LINUX_V3020_H */