Skip to contentSkip to conversation

drivers/scsi/qla2xxx/: make some functions static

PATCH In review [email protected] 1 participant 1 message Jun 9, 2006

Subsystems (2)
SCSI QLogic QLA2XXX FC-SCSI driver
lore
Share & tools
lore

[email protected]

author
#0 lore raw

PATCH 6/31 drivers/scsi/qla2xxx/: make some functions static

From: Adrian Bunk <[email protected]>

This patch makes some needlessly global functions static.

Signed-off-by Adrian Bunk <[email protected]>
Cc James Bottomley <[email protected]>
Signed-off-by Andrew Morton <[email protected]>

---

 drivers/scsi/qla2xxx/qla_os.c  |   12 ++++++------
 drivers/scsi/qla2xxx/qla_sup.c |    8 ++++----
 2 files changed, 10 insertions(+), 10 deletions(-)
drivers/scsi/qla2xxx/qla_os.c renamed from drivers/scsi/qla2xxx/qla_os.c~drivers-scsi-qla2xxx-make-some-functions-static +6 -6
diff -puN drivers/scsi/qla2xxx/qla_os.c~drivers-scsi-qla2xxx-make-some-functions-static drivers/scsi/qla2xxx/qla_os.c
@@ -261,7 +261,7 @@ qla24xx_pci_info_str(struct scsi_qla_hos
 	return str;
 }
 
-char *
+static char *
 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
 {
 	char un_str[10];

@@ -299,7 +299,7 @@ qla2x00_fw_version_str(struct scsi_qla_h
 	return (str);
 }
 
-char *
+static char *
 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
 {
 	sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,

@@ -591,7 +591,7 @@ qla2x00_wait_for_loop_ready(scsi_qla_hos
 * Note:
 *    Only return FAILED if command not returned by firmware.
 **************************************************************************/
-int
+static int
 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);

@@ -726,7 +726,7 @@ qla2x00_eh_wait_for_pending_target_comma
 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 *
 **************************************************************************/
-int
+static int
 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);

@@ -857,7 +857,7 @@ qla2x00_eh_wait_for_pending_commands(scs
 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 *
 **************************************************************************/
-int
+static int
 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);

@@ -918,7 +918,7 @@ eh_bus_reset_done:
 *
 * Note:
 **************************************************************************/
-int
+static int
 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
drivers/scsi/qla2xxx/qla_sup.c renamed from drivers/scsi/qla2xxx/qla_sup.c~drivers-scsi-qla2xxx-make-some-functions-static +4 -4
diff -puN drivers/scsi/qla2xxx/qla_sup.c~drivers-scsi-qla2xxx-make-some-functions-static drivers/scsi/qla2xxx/qla_sup.c
@@ -449,7 +449,7 @@ nvram_data_to_access_addr(uint32_t naddr
 	return FARX_ACCESS_NVRAM_DATA | naddr;
 }
 
-uint32_t
+static uint32_t
 qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
 {
 	int rval;

@@ -490,7 +490,7 @@ qla24xx_read_flash_data(scsi_qla_host_t 
 	return dwptr;
 }
 
-int
+static int
 qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
 {
 	int rval;

@@ -512,7 +512,7 @@ qla24xx_write_flash_dword(scsi_qla_host_
 	return rval;
 }
 
-void
+static void
 qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
     uint8_t *flash_id)
 {

@@ -537,7 +537,7 @@ qla24xx_get_flash_manufacturer(scsi_qla_
 	}
 }
 
-int
+static int
 qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
     uint32_t dwords)
 {

_