2.6.17-rc6-rt3
i have released the 2.6.17-rc6-rt3 tree, which can be downloaded from the usual place:
http://redhat.com/~mingo/realtime-preempt/
this is a fixes-only release: lots of fixes from Thomas Gleixner (for the softirq problem that caused those ping latency weirdnesses, for hrtimers and timers problems and for the RCU related bug that was causing instability and more), John Stultz, Jan Altenberg and Clark Williams. MIPS update from Manish Lachwani. Futex fix from Dinakar Guniguntala. It also includes the RT-scheduling SMP fix that could fix the scheduling problem reported by Darren Hart.
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
to build a 2.6.17-rc6-rt3 tree, the following patches should be applied:
http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.16.tar.bz2
http://kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.17-rc6.bz2
http://redhat.com/~mingo/realtime-preempt/patch-2.6.17-rc6-rt3
Ingo
Hi,
Quoted 5 lines · Ingo Molnar
i have released the 2.6.17-rc6-rt3 tree, which can be downloaded from the usual place:
My system hangs on boot.
Here is bug http://www.stardust.webpages.pl/files/rt/2.6.17-rc6-rt3/bug1.jpg
Here is config http://www.stardust.webpages.pl/files/rt/2.6.17-rc6-rt3/rt-config
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Michal,
Quoted 1 line · Michal Piotrowski
My system hangs on boot.
It boots fine with your config here :(. Any chance to get a full output via serial console ?
tglx
Hi Thomas,
Quoted 7 lines · Thomas Gleixner
Michal,
Quoted 1 line · Michal Piotrowski
My system hangs on boot.
It boots fine with your config here :(. Any chance to get a full output via serial console ?
Currently not. I'll buy serial cable.
Quoted 3 lines
tglx
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 5 lines · Michal Piotrowski
Hi Thomas,
Quoted 2 lines · Thomas Gleixner
Michal,
Quoted 8 lines
Quoted 5 lines · Michal Piotrowski
Quoted 1 line
My system hangs on boot.
It boots fine with your config here :(. Any chance to get a full output via serial console ?
Currently not. I'll buy serial cable.
Everything is ok when I build a kernel with gcc 4.1 [michal@ltg01-fedora ~]$ gcc -v
Using built-in specs.
Target: i386-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=i386-redhat-linux
Thread model: posix
gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)
Can you try build a kernel with gcc 3.4.6?
[michal@ltg01-fedora ~]$ gcc-3.4 -v
Reading specs from /usr/local/bin/../lib/gcc/i686-pc-linux-gnu/3.4.6/specs Configured with: ./configure --prefix=/usr/local/ --disable-nls --enable-shared --enable-languages=c --program-suffix=-3.4 Thread model: posix
gcc version 3.4.6
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 2 lines · Ingo Molnar
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
I still see two oddites.
top - 14:17:04 up 5 min, 8 users, load average: 0.37, 1.39, 0.78
Tasks: 148 total, 1 running, 147 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.4% us, 3.0% sy, 0.0% ni, 90.6% id, 0.0% wa, 0.0% hi, 0.0% si
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1281 root -44 -5 0 0 0 S 2.0 0.0 0:00.57 IRQ 20
6710 root 15 0 147m 15m 2196 S 2.0 1.6 0:11.85 X
8144 root 15 0 29612 14m 10m S 2.0 1.5 0:05.09 kdesktop
8087 root 15 0 27124 12m 8436 S 1.0 1.2 0:06.74 kxkb
8135 root 15 0 24132 9124 6712 S 1.0 0.9 0:02.52 kaccess
8139 root 15 0 27472 12m 8996 S 1.0 1.3 0:05.61 kwin
8146 root 15 0 31028 14m 10m S 1.0 1.5 0:07.94 kicker
8149 root 15 0 25380 10m 7948 S 1.0 1.0 0:02.30 klipper
8154 root 15 0 29648 12m 8432 S 1.0 1.2 0:03.09 suseplugger
8156 root 15 0 30912 14m 10m S 1.0 1.5 0:05.84 konsole
8158 root 15 0 28072 13m 9844 S 1.0 1.4 0:07.30 kmix
8159 root 15 0 30764 14m 10m S 1.0 1.5 0:05.99 konsole
8165 root 15 0 30768 14m 10m S 1.0 1.5 0:06.26 konsole
8170 root 15 0 35368 16m 12m S 1.0 1.7 0:04.47 konqueror
8172 root 15 0 44876 10m 8100 S 1.0 1.1 0:03.16 knotify
8297 root 16 0 2136 1076 788 R 1.0 0.1 0:02.51 top
1 root 16 0 688 260 224 S 0.0 0.0 0:03.14 initKDE twiddling it's thumbs takes 10% CPU, but didn't in rt29.
Fully repeatable oops when glibc's make check hits rt/tst-cpuclock1. This isn't a regression though, it's in rt29 too.
kernel BUG at :36841! <-- that's fully repeatable too invalid opcode: 0000 [#1]
PREEMPT SMP
Modules linked in: xt_pkttype ipt_LOG xt_limit snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd tda9887 saa7134 prism54 ohci1394 ieee1394 ir_kbd_i2c bt878 snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle iptable_nat ip_nat iptable_filter ip6table_mangle ip_conntrack nfnetlink ip_tables ip6table_filter ip6_tables x_tables tuner bttv video_buf firmware_class ir_common btcx_risc tveeprom sd_mod nls_iso8859_1 nls_cp437 nls_utf8 CPU: 1 EIP: 0060:[<b103cbaa>] Not tainted VLI EFLAGS: 00010202 (2.6.17-rc6-rt3-smp #169)
EIP is at posix_cpu_timer_set+0x505/0x52e
eax: 00000282 ebx: c9380f6c ecx: ef8b0b90 edx: dff80e10
esi: 3b9aca00 edi: c9380ee4 ebp: c9380eac esp: c9380e54
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process ld-linux.so.2 (pid: 18428, threadinfo=c9380000 task=dff80e10 stack_left=3616 worst_left=-1)
Stack: b13f98ed 00000202 c9380edc c9380ee4 c9380e78 b10151dc 00000000 05f5e100
00000000 05f5e100 00000000 ef8b0b90 fffffffd 00000000 c9380ee4 c9380ea4
b10151dc 00000000 00000000 c9380f6c 00000000 c9380ee4 c9380f88 b103ce18
Call Trace:
[<b10044db>] show_stack_log_lvl+0xaa/0xd5 (32)
[<b10046c8>] show_registers+0x1c2/0x28e (68)
[<b10048d0>] die+0x13c/0x31d (60)
[<b1004b3b>] do_trap+0x8a/0xdb (32)
[<b1005589>] do_invalid_op+0xae/0xb8 (192)
[<b1003f97>] error_code+0x4f/0x54 (148)
[<b103ce18>] posix_cpu_nsleep+0xfd/0x23b (220)
[<b103969f>] sys_clock_nanosleep+0xe7/0xee (44)
[<b10033e4>] syscall_call+0x7/0xb (-4020)
Code: 68 00 00 00 00 c7 45 d8 fd ff ff ff e9 db fd ff ff c7 41 6c ff ff ff ff c7 45 d8 01 00 00 00 c7 45 e4 01 00 00 00 e9 e8 fb ff ff <0f> 0b e9 8f fb ff ff b8 80 7a 5a b1 e8 ff cc 3b 00 e9 81 fd ff
EIP: [<b103cbaa>] posix_cpu_timer_set+0x505/0x52e SS:ESP 0068:c9380e54<peek>
(gdb) list *posix_cpu_timer_set+0x5050xb103cbaa is in posix_cpu_timer_set (posix-cpu-timers.c:724).
719 }
720
721 /*
722 * Disarm any old timer after extracting its expiry time.
723 */
724 BUG_ON(!irqs_disabled());
725
726 ret = 0; 727 spin_lock(&p->sighand->siglock); 728 old_expires = timer->it.cpu.expires;
(gdb) list *posix_cpu_nsleep+0xfd0xb103ce18 is in posix_cpu_nsleep (posix-cpu-timers.c:1597).
1592 static struct itimerspec zero_it;
1593 struct itimerspec it = { .it_value = *rqtp,
1594 .it_interval = {} };
1595
1596 spin_lock_irq(&timer.it_lock);
1597 error = posix_cpu_timer_set(&timer, flags, &it, NULL);
1598 if (error) {1599 spin_unlock_irq(&timer.it_lock);
1600 return error;
1601 }
(gdb)
<nope, definitely not Kansas>
Quoted 54 lines · Mike Galbraith
Quoted 2 lines · Ingo Molnar
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
Fully repeatable oops when glibc's make check hits rt/tst-cpuclock1. This isn't a regression though, it's in rt29 too.
kernel BUG at :36841! <-- that's fully repeatable too invalid opcode: 0000 [#1]
PREEMPT SMPModules linked in: xt_pkttype ipt_LOG xt_limit snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd tda9887 saa7134 prism54 ohci1394 ieee1394 ir_kbd_i2c bt878 snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle iptable_nat ip_nat iptable_filter ip6table_mangle ip_conntrack nfnetlink ip_tables ip6table_filter ip6_tables x_tables tuner bttv video_buf firmware_class ir_common btcx_risc tveeprom sd_mod nls_iso8859_1 nls_cp437 nls_utf8 CPU: 1 EIP: 0060:[<b103cbaa>] Not tainted VLI EFLAGS: 00010202 (2.6.17-rc6-rt3-smp #169)EIP is at
posix_cpu_timer_set+0x505/0x52e
eax: 00000282 ebx:c9380f6cecx:ef8b0b90edx:dff80e10
esi:3b9aca00edi:c9380ee4ebp:c9380eacesp:c9380e54
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process ld-linux.so.2 (pid: 18428, threadinfo=c9380000 task=dff80e10 stack_left=3616 worst_left=-1)Stack: b13f98ed 00000202 c9380edc c9380ee4 c9380e78 b10151dc 00000000 05f5e100 00000000 05f5e100 00000000 ef8b0b90 fffffffd 00000000 c9380ee4 c9380ea4 b10151dc 00000000 00000000 c9380f6c 00000000 c9380ee4 c9380f88 b103ce18 Call Trace: [<b10044db>] show_stack_log_lvl+0xaa/0xd5 (32) [<b10046c8>] show_registers+0x1c2/0x28e (68) [<b10048d0>] die+0x13c/0x31d (60) [<b1004b3b>] do_trap+0x8a/0xdb (32) [<b1005589>] do_invalid_op+0xae/0xb8 (192) [<b1003f97>] error_code+0x4f/0x54 (148) [<b103ce18>] posix_cpu_nsleep+0xfd/0x23b (220) [<b103969f>] sys_clock_nanosleep+0xe7/0xee (44) [<b10033e4>] syscall_call+0x7/0xb (-4020) Code: 68 00 00 00 00 c7 45 d8 fd ff ff ff e9 db fd ff ff c7 41 6c ff ff ff ff c7 45 d8 01 00 00 00 c7 45 e4 01 00 00 00 e9 e8 fb ff ff <0f> 0b e9 8f fb ff ff b8 80 7a 5a b1 e8 ff cc 3b 00 e9 81 fd ff EIP: [<b103cbaa>] posix_cpu_timer_set+0x505/0x52e SS:ESP 0068:c9380e54<peek>
(gdb) list *posix_cpu_timer_set+0x5050xb103cbaais inposix_cpu_timer_set(posix-cpu-timers.c:724).
719 }
720
721 /*
722 * Disarm any old timer after extracting its expiry time.
723 */
724 BUG_ON(!irqs_disabled());
725726 ret = 0; 727 spin_lock(&p->sighand->siglock); 728 old_expires = timer->it.cpu.expires;(gdb) list *posix_cpu_nsleep+0xfd
0xb103ce18is inposix_cpu_nsleep(posix-cpu-timers.c:1597).
1592 static struct itimerspeczero_it;
1593 struct itimerspec it = { .it_value = *rqtp,
1594 .it_interval = {} };
1595
Quoted 8 lines
1596 spin_lock_irq(&timer.it_lock); 1597 error = posix_cpu_timer_set(&timer, flags, &it, NULL); 1598 if (error) {1599
spin_unlock_irq(&timer.it_lock);
1600 return error;
1601 }
(gdb)
<nope, definitely not Kansas>
7796 ...:0 61481.339ms: user_trace_stop+0xe/0x39c <= (posix_cpu_timer_set+0x31f/0x547) <--at bug_on() time 7796 ...:0 61481.338ms: rt_lock+0x8/0x29 <= (rt_read_lock+0x33/0x46) 7796 D..:1 61481.338ms: _raw_spin_unlock_irqrestore+0xc/0x50 <= (rt_read_lock+0x2c/0x46) 7796 ...:0 61481.337ms: _raw_spin_lock_irqsave+0xd/0x63 <= (rt_read_lock+0x10/0x46) 7796 ...:0 61481.337ms: rt_read_lock+0x9/0x46 <= (posix_cpu_timer_set+0x7f/0x547) 7796 ...:0 61481.337ms: posix_cpu_timer_set+0xe/0x547 <= (posix_cpu_nsleep+0x106/0x251) 7796 ...:0 61481.336ms: rt_lock+0x8/0x29 <= (posix_cpu_nsleep+0xe2/0x251) 7796 ...:1 61481.336ms: rt_mutex_unlock+0xd/0x37 <= (rt_up+0x32/0x59) 7796 ...:0 61481.335ms: rt_up+0xc/0x59 <= (user_trace_start+0x104/0x1dc) 7796 D..:0 61481.335ms: user_trace_start+0xdd/0x1dc <= (posix_cpu_nsleep+0x161/0x251) <--once, at first use
OK, it's dying on the very first call, with absolutely nothing between spin_lock_irq() and BUG_ON(!irqs_disabled()), but the spin_lock_irq() has become rt_lock(). Is the BUG_ON() check bogus for the rt kernel?
-Mike
Quoted 3 lines · Mike Galbraith
OK, it's dying on the very first call, with absolutely nothing between
spin_lock_irq()and BUG_ON(!irqs_disabled()), but thespin_lock_irq()has becomert_lock(). Is theBUG_ON()check bogus for the rt kernel?
Yes. The patch below should help.
tglx
kernel/posix-cpu-timers.c +2 -2
@@ -564,7 +564,7 @@ p->cpu_timers : p->signal->cpu_timers); head +=CPUCLOCK_WHICH (timer->it_clock); -BUG_ON (!irqs_disabled ()); +BUG_ON_NONRT (!irqs_disabled ());spin_lock (&p->sighand->siglock); listpos = head;
@@ -721,7 +721,7 @@/* * Disarm any old timer after extracting its expiry time. */ -BUG_ON (!irqs_disabled ()); +BUG_ON_NONRT (!irqs_disabled ()); ret =0 ;spin_lock (&p->sighand->siglock);
On 6/11/06, Thomas Gleixner <[email protected]> wrote:
Just a quick note to say that 2.6.17-rc6-rt3 booted fine on my AMD64 box. Unlike rc6-rt1 this one will run X with no problems so far. Audio is up, 1394 hard drives are fine, no xruns using Jack at 64/2. I'll report back more if I run into any issues.
Great work!
mark@lightning ~ $ uname -a
Linux lightning 2.6.17-rc6-rt3 #4 PREEMPT Sun Jun 11 12:18:09 PDT 2006 x86_64 AMD Athlon(tm) 64 Processor 3000+ GNU/Linux mark@lightning ~ $
Cheers,
Mark
Quoted 13 lines · Ingo Molnar
i have released the 2.6.17-rc6-rt3 tree, which can be downloaded from the usual place:
http://redhat.com/~mingo/realtime-preempt/
this is a fixes-only release: lots of fixes from Thomas Gleixner (for the softirq problem that caused those ping latency weirdnesses, for hrtimers and timers problems and for the RCU related bug that was causing instability and more), John Stultz, Jan Altenberg and Clark Williams. MIPS update from Manish Lachwani. Futex fix from Dinakar Guniguntala. It also includes the RT-scheduling SMP fix that could fix the scheduling problem reported by Darren Hart.
Quoted 3 lines
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
Great, boots fine on my dual Xeon and solves the ping problem I was
having.
Thomas, any hint at what was going on?
Thanks,
Sébastien.
Quoted 9 lines · Sébastien Dugué
Quoted 4 lines
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
Great, boots fine on my dual Xeon and solves the ping problem I was
having.Thomas, any hint at what was going on?
I missed some modificatons in the networking code when I did the forward to 2.6.17-rc6. The network softirq was raised, but the thread not woken up.
tglx
Quoted 7 lines · Sébastien Dugué
Quoted 2 lines
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
Great, boots fine on my dual Xeon and solves the ping problem I was
having.Thomas, any hint at what was going on?
the problem was caused by a mismerge of the __raise_softirq_irqoff() changes of preempt-softirqs. In PREEMPT_SOFTIRQS, softirq activation means a wakeup of the softirq thread - hence __raise_softirq_irqoff() must wake up the softirq thead too. This didnt happen in -rt1 so the network softirq (which processes things like ping reply packets) got delayed to the natural softirq event - the next timer interrupt in the usual case. Hence depending on HZ you got a delay of 1-4-10 msecs (divided into two parts).
Ingo
Quoted 10 lines · Ingo Molnar
Quoted 7 lines · Sébastien Dugué
Quoted 2 lines
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
Great, boots fine on my dual Xeon and solves the ping problem I was
having.Thomas, any hint at what was going on?
Quoted 9 lines
the problem was caused by a mismerge of the
__raise_softirq_irqoff()changes of preempt-softirqs. InPREEMPT_SOFTIRQS, softirq activation means a wakeup of the softirq thread - hence__raise_softirq_irqoff()must wake up the softirq thead too. This didnt happen in -rt1 so the network softirq (which processes things like ping reply packets) got delayed to the natural softirq event - the next timer interrupt in the usual case. Hence depending on HZ you got a delay of 1-4-10 msecs (divided into two parts).
Thanks.
Sébastien.
Quoted 16 lines · Ingo Molnar
i have released the 2.6.17-rc6-rt3 tree, which can be downloaded from the usual place:
http://redhat.com/~mingo/realtime-preempt/
this is a fixes-only release: lots of fixes from Thomas Gleixner (for the softirq problem that caused those ping latency weirdnesses, for hrtimers and timers problems and for the RCU related bug that was causing instability and more), John Stultz, Jan Altenberg and Clark Williams. MIPS update from Manish Lachwani. Futex fix from Dinakar Guniguntala. It also includes the RT-scheduling SMP fix that could fix the scheduling problem reported by Darren Hart.
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
Quoted 7 lines
to build a 2.6.17-rc6-rt3 tree, the following patches should be applied:
http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.16.tar.bz2
http://kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.17-rc6.bz2
http://redhat.com/~mingo/realtime-preempt/patch-2.6.17-rc6-rt3Ingo
This one still doesn't boot for me on a dual Xeon 2.60. Config is attached and oops is included below.
*****************************************************************************
*
*
* REMINDER, the following debugging option is turned on in your
.config: *
*
*
* CONFIG_DEBUG_RT_MUTEXES
*
*
*
* it may increase runtime overhead and latencies.
*
*
******************************************************************************
Freeing unused kernel memory: 200k freed
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
BUG: unable to handle kernel paging request at virtual address f3010000 printing eip: *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 EIP: 0060:[<c0132f9c>] Not tainted VLI EFLAGS: 00010297 (2.6.17-rc6-rt4 #10)
EIP is at lookup_symbol+0x11/0x35
eax: 00000001 ebx: e083185c ecx: c02f20c4 edx: c02f0000
esi: f3010000 edi: e083185c ebp: df597e80 esp: df597e74
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process modprobe (pid: 1419, threadinfo=df596000 task=dec3ac90 stack_left=7744 worst_left=-1)
Stack: e083b580 00000bf0 e083185c df597e9c c0132fe5 df597eb4 df597eb0
e083b580
00000bf0 e083185c df597ec4 c0133c93 00000001 00000012 e082dde8
00000000
df597ed8 e0839200 00000bf0 e082dde8 df597ee8 c01341fa e083b580
00000000
Call Trace:
[<c01036a1>] show_stack_log_lvl+0x82/0x8a (36)
[<c0103821>] show_registers+0x139/0x1a1 (32)
[<c0103a15>] die+0x118/0x1df (60)
[<c0110cf3>] do_page_fault+0x45c/0x532 (76)
[<c010336b>] error_code+0x4f/0x54 (72)
[<c0132fe5>] __find_symbol+0x25/0x1b7 (28)
[<c0133c93>] resolve_symbol+0x27/0x5f (40)
[<c01341fa>] simplify_symbols+0x83/0xf3 (36)
[<c0134e31>] load_module+0x668/0x9e2 (184)
[<c0135210>] sys_init_module+0x42/0x1a4 (20)
[<c01027fb>] sysenter_past_esp+0x54/0x75 (-8116)
Code: eb 11 8b 75 f0 41 83 c2 28 0f b7 46 30 39 c1 72 c9 31 c0 5a 59 5b5e 5f 5d c3 55 89 e5 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 04 89
EIP: [<c0132f9c>] lookup_symbol+0x11/0x35 SS:ESP 0068:df597e74
Signature · 1 line
kr
Quoted 82 lines · K.R. Foley
Quoted 16 lines · Ingo Molnar
i have released the 2.6.17-rc6-rt3 tree, which can be downloaded from the usual place:
http://redhat.com/~mingo/realtime-preempt/
this is a fixes-only release: lots of fixes from Thomas Gleixner (for the softirq problem that caused those ping latency weirdnesses, for hrtimers and timers problems and for the RCU related bug that was causing instability and more), John Stultz, Jan Altenberg and Clark Williams. MIPS update from Manish Lachwani. Futex fix from Dinakar Guniguntala. It also includes the RT-scheduling SMP fix that could fix the scheduling problem reported by Darren Hart.
I think all of the regressions reported against rt1 are fixed, please re-report if any of them is still unfixed.
Quoted 7 lines
to build a 2.6.17-rc6-rt3 tree, the following patches should be applied:
http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.16.tar.bz2
http://kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.17-rc6.bz2
http://redhat.com/~mingo/realtime-preempt/patch-2.6.17-rc6-rt3Ingo
This one still doesn't boot for me on a dual Xeon 2.60. Config is attached and oops is included below.
*****************************************************************************
** * REMINDER, the following debugging option is turned on in your .config: * * * * CONFIG_DEBUG_RT_MUTEXES * * * * it may increase runtime overhead and latencies. * * ******************************************************************************
Freeing unused kernel memory: 200k freed
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.BUG: unable to handle kernel paging request at virtual address f3010000 printing eip: *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 EIP: 0060:[<c0132f9c>] Not tainted VLI EFLAGS: 00010297 (2.6.17-rc6-rt4 #10)EIP is at
lookup_symbol+0x11/0x35
eax: 00000001 ebx:e083185cecx:c02f20c4edx:c02f0000
esi:f3010000edi:e083185cebp:df597e80esp:df597e74
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process modprobe (pid: 1419, threadinfo=df596000 task=dec3ac90 stack_left=7744 worst_left=-1)Stack: e083b580 00000bf0 e083185c df597e9c c0132fe5 df597eb4 df597eb0 e083b580 00000bf0 e083185c df597ec4 c0133c93 00000001 00000012 e082dde8 00000000 df597ed8 e0839200 00000bf0 e082dde8 df597ee8 c01341fa e083b580 00000000 Call Trace: [<c01036a1>] show_stack_log_lvl+0x82/0x8a (36) [<c0103821>] show_registers+0x139/0x1a1 (32) [<c0103a15>] die+0x118/0x1df (60) [<c0110cf3>] do_page_fault+0x45c/0x532 (76) [<c010336b>] error_code+0x4f/0x54 (72) [<c0132fe5>] __find_symbol+0x25/0x1b7 (28) [<c0133c93>] resolve_symbol+0x27/0x5f (40) [<c01341fa>] simplify_symbols+0x83/0xf3 (36) [<c0134e31>] load_module+0x668/0x9e2 (184) [<c0135210>] sys_init_module+0x42/0x1a4 (20) [<c01027fb>] sysenter_past_esp+0x54/0x75 (-8116) Code: eb 11 8b 75 f0 41 83 c2 28 0f b7 46 30 39 c1 72 c9 31 c0 5a 59 5b
Quoted 7 lines
5e 5f 5d c3 55 89 e5 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 04 89
EIP: [<c0132f9c>]lookup_symbol+0x11/0x35SS:ESP 0068:df597e74
DOH! That was actually 2.6.17-rc6-rt4. Sorry.
Signature · 1 line
kr
Quoted 38 lines · K.R. Foley
Quoted 34 lines
BUG: unable to handle kernel paging request at virtual address f3010000 printing eip: *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 EIP: 0060:[<c0132f9c>] Not tainted VLI EFLAGS: 00010297 (2.6.17-rc6-rt4 #10)EIP is at
lookup_symbol+0x11/0x35
eax: 00000001 ebx:e083185cecx:c02f20c4edx:c02f0000
esi:f3010000edi:e083185cebp:df597e80esp:df597e74
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process modprobe (pid: 1419, threadinfo=df596000 task=dec3ac90 stack_left=7744 worst_left=-1)Stack: e083b580 00000bf0 e083185c df597e9c c0132fe5 df597eb4 df597eb0 e083b580 00000bf0 e083185c df597ec4 c0133c93 00000001 00000012 e082dde8 00000000 df597ed8 e0839200 00000bf0 e082dde8 df597ee8 c01341fa e083b580 00000000 Call Trace: [<c01036a1>] show_stack_log_lvl+0x82/0x8a (36) [<c0103821>] show_registers+0x139/0x1a1 (32) [<c0103a15>] die+0x118/0x1df (60) [<c0110cf3>] do_page_fault+0x45c/0x532 (76) [<c010336b>] error_code+0x4f/0x54 (72) [<c0132fe5>] __find_symbol+0x25/0x1b7 (28) [<c0133c93>] resolve_symbol+0x27/0x5f (40) [<c01341fa>] simplify_symbols+0x83/0xf3 (36) [<c0134e31>] load_module+0x668/0x9e2 (184) [<c0135210>] sys_init_module+0x42/0x1a4 (20) [<c01027fb>] sysenter_past_esp+0x54/0x75 (-8116) Code: eb 11 8b 75 f0 41 83 c2 28 0f b7 46 30 39 c1 72 c9 31 c0 5a 59 5bQuoted 3 lines
5e 5f 5d c3 55 89 e5 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 04 89
EIP: [<c0132f9c>]lookup_symbol+0x11/0x35SS:ESP 0068:df597e74
Quoted 1 line
DOH! That was actually 2.6.17-rc6-rt4. Sorry.
Which module is it trying to load ?
tglx
Quoted 38 lines · Thomas Gleixner
Quoted 37 lines · K.R. Foley
Quoted 37 lines
BUG: unable to handle kernel paging request at virtual address f3010000 printing eip: *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 EIP: 0060:[<c0132f9c>] Not tainted VLI EFLAGS: 00010297 (2.6.17-rc6-rt4 #10)EIP is at
lookup_symbol+0x11/0x35
eax: 00000001 ebx:e083185cecx:c02f20c4edx:c02f0000
esi:f3010000edi:e083185cebp:df597e80esp:df597e74
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process modprobe (pid: 1419, threadinfo=df596000 task=dec3ac90 stack_left=7744 worst_left=-1)Stack: e083b580 00000bf0 e083185c df597e9c c0132fe5 df597eb4 df597eb0 e083b580 00000bf0 e083185c df597ec4 c0133c93 00000001 00000012 e082dde8 00000000 df597ed8 e0839200 00000bf0 e082dde8 df597ee8 c01341fa e083b580 00000000 Call Trace: [<c01036a1>] show_stack_log_lvl+0x82/0x8a (36) [<c0103821>] show_registers+0x139/0x1a1 (32) [<c0103a15>] die+0x118/0x1df (60) [<c0110cf3>] do_page_fault+0x45c/0x532 (76) [<c010336b>] error_code+0x4f/0x54 (72) [<c0132fe5>] __find_symbol+0x25/0x1b7 (28) [<c0133c93>] resolve_symbol+0x27/0x5f (40) [<c01341fa>] simplify_symbols+0x83/0xf3 (36) [<c0134e31>] load_module+0x668/0x9e2 (184) [<c0135210>] sys_init_module+0x42/0x1a4 (20) [<c01027fb>] sysenter_past_esp+0x54/0x75 (-8116) Code: eb 11 8b 75 f0 41 83 c2 28 0f b7 46 30 39 c1 72 c9 31 c0 5a 59 5b5e 5f 5d c3 55 89 e5 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 04 89
EIP: [<c0132f9c>]lookup_symbol+0x11/0x35SS:ESP 0068:df597e74
Quoted 5 lines
Quoted 1 line
DOH! That was actually 2.6.17-rc6-rt4. Sorry.
Which module is it trying to load ?
tglx
Can't really say which it is trying to load when it dies. The lines below are the lines that immediately preceed the oops.
NET: Registered protocol family 1
input: AT Translated Set 2 keyboard as /class/input/input0
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Starting balanced_irq
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 3
hrtimers: Switched to high resolution mode CPU 2
hrtimers: Switched to high resolution mode CPU 1
hrtimers: Switched to high resolution mode CPU 0
*****************************************************************************
*
*
* REMINDER, the following debugging option is turned on in your
.config: *
*
*
* CONFIG_DEBUG_RT_MUTEXES
*
*
*
* it may increase runtime overhead and latencies.
*
*
******************************************************************************
Freeing unused kernel memory: 200k freed
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Signature · 1 line
kr
Quoted 79 lines · K.R. Foley
Quoted 40 lines · Thomas Gleixner
Quoted 38 lines · K.R. Foley
Quoted 38 lines
BUG: unable to handle kernel paging request at virtual address f3010000 printing eip: *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 EIP: 0060:[<c0132f9c>] Not tainted VLI EFLAGS: 00010297 (2.6.17-rc6-rt4 #10)EIP is at
lookup_symbol+0x11/0x35
eax: 00000001 ebx:e083185cecx:c02f20c4edx:c02f0000
esi:f3010000edi:e083185cebp:df597e80esp:df597e74
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process modprobe (pid: 1419, threadinfo=df596000 task=dec3ac90 stack_left=7744 worst_left=-1)Stack: e083b580 00000bf0 e083185c df597e9c c0132fe5 df597eb4 df597eb0 e083b580 00000bf0 e083185c df597ec4 c0133c93 00000001 00000012 e082dde8 00000000 df597ed8 e0839200 00000bf0 e082dde8 df597ee8 c01341fa e083b580 00000000 Call Trace: [<c01036a1>] show_stack_log_lvl+0x82/0x8a (36) [<c0103821>] show_registers+0x139/0x1a1 (32) [<c0103a15>] die+0x118/0x1df (60) [<c0110cf3>] do_page_fault+0x45c/0x532 (76) [<c010336b>] error_code+0x4f/0x54 (72) [<c0132fe5>] __find_symbol+0x25/0x1b7 (28) [<c0133c93>] resolve_symbol+0x27/0x5f (40) [<c01341fa>] simplify_symbols+0x83/0xf3 (36) [<c0134e31>] load_module+0x668/0x9e2 (184) [<c0135210>] sys_init_module+0x42/0x1a4 (20) [<c01027fb>] sysenter_past_esp+0x54/0x75 (-8116) Code: eb 11 8b 75 f0 41 83 c2 28 0f b7 46 30 39 c1 72 c9 31 c0 5a 59 5b5e 5f 5d c3 55 89 e5 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 04 89
EIP: [<c0132f9c>]lookup_symbol+0x11/0x35SS:ESP 0068:df597e74Quoted 6 lines
Quoted 2 lines
DOH! That was actually 2.6.17-rc6-rt4. Sorry.
Which module is it trying to load ?
tglx
Can't really say which it is trying to load when it dies. The lines below are the lines that immediately preceed the oops.
NET: Registered protocol family 1
input: AT Translated Set 2 keyboard as /class/input/input0
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Startingbalanced_irq
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 3
hrtimers: Switched to high resolution mode CPU 2
hrtimers: Switched to high resolution mode CPU 1
hrtimers: Switched to high resolution mode CPU 0
*****************************************************************************
** * REMINDER, the following debugging option is turned on in your .config: * * * * CONFIG_DEBUG_RT_MUTEXES * * * * it may increase runtime overhead and latencies. * * *
Quoted 7 lines
*****************************************************************************
Freeing unused kernel memory: 200k freed
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Similar for me on a dual Xeon 3.2 with 2.6.17-rc6-rt4:
*****************************************************************************
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 0
hrtimers: Switched to high resolution mode CPU 1
* * * REMINDER, the following debugging option is turned on in your .config: * * * * CONFIG_DEBUG_RT_MUTEXES * * * * it may increase runtime overhead and latencies. * * *
*****************************************************************************
Freeing unused kernel memory: 208k freed
Red Hat nash version 4.1.18.1 starting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Loading jbd.ko mBUG: unable to handle kernel paging request at virtual address 75010000 printing eip:c0135679
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP Modules linked in:
CPU: 1
Eodule
IP: 0060:[<c0135679>] Not tainted VLI
EFLAGS: 00010297 (2.6.17-rc6-rt5 #1)
EIP is at lookup_symbol+0xe/0x31
eax: ffffffff ebx: f881a7d2 ecx: c0332f3c edx: c03309d8
esi: 75010000 edi: f881a7d2 ebp: f7f27ec0 esp: f7f27e8c
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process insmod (pid: 293, threadinfo=f7f27000 task=f7f360f0 stack_left=3672 worst_left=-1)
Stack: f882e520 000010a0 f881a7d2 c01356bd f7f27ebc f882e520 000010a0 f881a7d2
00000012 c013630c 00000001 f881752c 00000000 c0334284 f882abc0
000010a0
f881752c 0000008f c0136859 f882e520 00000000 f881931c f882e52c
f882e52d
Call Trace:
[<c01356bd>] __find_symbol+0x21/0x1b3 (16)
[<c013630c>] resolve_symbol+0x27/0x61 (24)
[<c0136859>] simplify_symbols+0x85/0xf7 (36)
[<c0137532>] load_module+0x73f/0xaf9 (32)
[<c013373e>] try_to_take_rt_mutex+0x165/0x172 (20)
[<c013792f>] sys_init_module+0x24/0x1a0 (16)
[<c013794d>] sys_init_module+0x42/0x1a0 (144)
[<c01032d3>] sysenter_past_esp+0x54/0x75 (16)
Code: 01 85 c0 75 04 89 c8 eb 0e 0f b7 45 30 41 83 c2 28 39 c1 72 cb 31 c0 5a 5b 5e 5f 5d c3 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0Quoted 127 lines · Bruce Eleniak
Quoted 80 lines · K.R. Foley
Quoted 40 lines · Thomas Gleixner
Quoted 38 lines · K.R. Foley
Quoted 38 lines
BUG: unable to handle kernel paging request at virtual address f3010000 printing eip: *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 EIP: 0060:[<c0132f9c>] Not tainted VLI EFLAGS: 00010297 (2.6.17-rc6-rt4 #10)EIP is at
lookup_symbol+0x11/0x35
eax: 00000001 ebx:e083185cecx:c02f20c4edx:c02f0000
esi:f3010000edi:e083185cebp:df597e80esp:df597e74
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process modprobe (pid: 1419, threadinfo=df596000 task=dec3ac90 stack_left=7744 worst_left=-1)Stack: e083b580 00000bf0 e083185c df597e9c c0132fe5 df597eb4 df597eb0 e083b580 00000bf0 e083185c df597ec4 c0133c93 00000001 00000012 e082dde8 00000000 df597ed8 e0839200 00000bf0 e082dde8 df597ee8 c01341fa e083b580 00000000 Call Trace: [<c01036a1>] show_stack_log_lvl+0x82/0x8a (36) [<c0103821>] show_registers+0x139/0x1a1 (32) [<c0103a15>] die+0x118/0x1df (60) [<c0110cf3>] do_page_fault+0x45c/0x532 (76) [<c010336b>] error_code+0x4f/0x54 (72) [<c0132fe5>] __find_symbol+0x25/0x1b7 (28) [<c0133c93>] resolve_symbol+0x27/0x5f (40) [<c01341fa>] simplify_symbols+0x83/0xf3 (36) [<c0134e31>] load_module+0x668/0x9e2 (184) [<c0135210>] sys_init_module+0x42/0x1a4 (20) [<c01027fb>] sysenter_past_esp+0x54/0x75 (-8116) Code: eb 11 8b 75 f0 41 83 c2 28 0f b7 46 30 39 c1 72 c9 31 c0 5a 59 5b5e 5f 5d c3 55 89 e5 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 04 89
EIP: [<c0132f9c>]lookup_symbol+0x11/0x35SS:ESP 0068:df597e74Quoted 6 lines
Quoted 2 lines
DOH! That was actually 2.6.17-rc6-rt4. Sorry.
Which module is it trying to load ?
tglx
Can't really say which it is trying to load when it dies. The lines below are the lines that immediately preceed the oops.
NET: Registered protocol family 1
input: AT Translated Set 2 keyboard as /class/input/input0
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Startingbalanced_irq
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 3
hrtimers: Switched to high resolution mode CPU 2
hrtimers: Switched to high resolution mode CPU 1
hrtimers: Switched to high resolution mode CPU 0
******************************************************************************
* * REMINDER, the following debugging option is turned on in your .config: * * * * CONFIG_DEBUG_RT_MUTEXES * * * * it may increase runtime overhead and latencies. * * *Quoted 8 lines
*****************************************************************************
Freeing unused kernel memory: 200k freed
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.Similar for me on a dual Xeon 3.2 with 2.6.17-rc6-rt4:
*****************************************************************************
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 0
hrtimers: Switched to high resolution mode CPU 1* * * REMINDER, the following debugging option is turned on in your .config: * * * * CONFIG_DEBUG_RT_MUTEXES * * * * it may increase runtime overhead and latencies. * * ******************************************************************************
Freeing unused kernel memory: 208k freed
Red Hat nash version 4.1.18.1 starting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Loading jbd.ko mBUG: unable to handle kernel paging request at virtual address 75010000 printing eip:c0135679
*pde = 00000000Oops: 0000 [#1] PREEMPT SMP Modules linked in:CPU: 1
Eodule
IP: 0060:[<c0135679>] Not tainted VLI
EFLAGS: 00010297 (2.6.17-rc6-rt5 #1)
EIP is atlookup_symbol+0xe/0x31
eax: ffffffff ebx:f881a7d2ecx:c0332f3cedx:c03309d8
esi: 75010000 edi:f881a7d2ebp:f7f27ec0esp:f7f27e8c
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process insmod (pid: 293, threadinfo=f7f27000 task=f7f360f0 stack_left=3672 worst_left=-1)
Quoted 17 lines
Stack: f882e520 000010a0 f881a7d2 c01356bd f7f27ebc f882e520 000010a0 f881a7d2
00000012 c013630c 00000001 f881752c 00000000 c0334284 f882abc0
000010a0
f881752c 0000008f c0136859 f882e520 00000000 f881931c f882e52c
f882e52d
Call Trace:
[<c01356bd>] __find_symbol+0x21/0x1b3 (16)
[<c013630c>] resolve_symbol+0x27/0x61 (24)
[<c0136859>] simplify_symbols+0x85/0xf7 (36)
[<c0137532>] load_module+0x73f/0xaf9 (32)
[<c013373e>] try_to_take_rt_mutex+0x165/0x172 (20)
[<c013792f>] sys_init_module+0x24/0x1a0 (16)
[<c013794d>] sys_init_module+0x42/0x1a0 (144)
[<c01032d3>] sysenter_past_esp+0x54/0x75 (16)
Code: 01 85 c0 75 04 89 c8 eb 0e 0f b7 45 30 41 83 c2 28 39 c1 72 cb 31 c0 5a 5b 5e 5f 5d c3 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0Whoops. 2.6.17-rc6-rt5 sorry. FWIW, Thomas' 2.6.17-rc6-hrt4 runs fine in isolation from the rt patchset.
Quoted 160 lines · Bruce Eleniak
Quoted 155 lines · Bruce Eleniak
Quoted 83 lines · K.R. Foley
Quoted 43 lines · Thomas Gleixner
Quoted 41 lines · K.R. Foley
Quoted 41 lines
BUG: unable to handle kernel paging request at virtual address f3010000 printing eip: *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 EIP: 0060:[<c0132f9c>] Not tainted VLI EFLAGS: 00010297 (2.6.17-rc6-rt4 #10)EIP is at
lookup_symbol+0x11/0x35
eax: 00000001 ebx:e083185cecx:c02f20c4edx:c02f0000
esi:f3010000edi:e083185cebp:df597e80esp:df597e74
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process modprobe (pid: 1419, threadinfo=df596000 task=dec3ac90 stack_left=7744 worst_left=-1)Stack: e083b580 00000bf0 e083185c df597e9c c0132fe5 df597eb4 df597eb0 e083b580 00000bf0 e083185c df597ec4 c0133c93 00000001 00000012 e082dde8 00000000 df597ed8 e0839200 00000bf0 e082dde8 df597ee8 c01341fa e083b580 00000000 Call Trace: [<c01036a1>] show_stack_log_lvl+0x82/0x8a (36) [<c0103821>] show_registers+0x139/0x1a1 (32) [<c0103a15>] die+0x118/0x1df (60) [<c0110cf3>] do_page_fault+0x45c/0x532 (76) [<c010336b>] error_code+0x4f/0x54 (72) [<c0132fe5>] __find_symbol+0x25/0x1b7 (28) [<c0133c93>] resolve_symbol+0x27/0x5f (40) [<c01341fa>] simplify_symbols+0x83/0xf3 (36) [<c0134e31>] load_module+0x668/0x9e2 (184) [<c0135210>] sys_init_module+0x42/0x1a4 (20) [<c01027fb>] sysenter_past_esp+0x54/0x75 (-8116) Code: eb 11 8b 75 f0 41 83 c2 28 0f b7 46 30 39 c1 72 c9 31 c0 5a59 5b
5e 5f 5d c3 55 89 e5 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae
75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 04 89
EIP: [<c0132f9c>]lookup_symbol+0x11/0x35SS:ESP 0068:df597e74Quoted 6 lines
Quoted 2 lines
DOH! That was actually 2.6.17-rc6-rt4. Sorry.
Which module is it trying to load ?
tglx
Can't really say which it is trying to load when it dies. The lines below are the lines that immediately preceed the oops.
NET: Registered protocol family 1
input: AT Translated Set 2 keyboard as /class/input/input0
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Startingbalanced_irq
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 3
hrtimers: Switched to high resolution mode CPU 2
hrtimers: Switched to high resolution mode CPU 1
hrtimers: Switched to high resolution mode CPU 0
******************************************************************************
* * REMINDER, the following debugging option is turned on in your .config: * * * * CONFIG_DEBUG_RT_MUTEXES * * * * it may increase runtime overhead and latencies. * * *Quoted 8 lines
*****************************************************************************
Freeing unused kernel memory: 200k freed
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.Similar for me on a dual Xeon 3.2 with 2.6.17-rc6-rt4:
*****************************************************************************
Time: tsc clocksource has been installed.
hrtimers: Switched to high resolution mode CPU 0
hrtimers: Switched to high resolution mode CPU 1
*
*
* REMINDER, the following debugging option is turned on in your
.config: *
*
*
*CONFIG_DEBUG_RT_MUTEXES*
*
*
* it may increase runtime overhead and
latencies. *
*
*
*****************************************************************************Freeing unused kernel memory: 208k freed
Red Hat nash version 4.1.18.1 starting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Loading jbd.ko mBUG: unable to handle kernel paging request at virtual address 75010000
printing eip:c0135679
*pde = 00000000Oops: 0000 [#1] PREEMPT SMP Modules linked in:CPU: 1
Eodule
IP: 0060:[<c0135679>] Not tainted VLI
EFLAGS: 00010297 (2.6.17-rc6-rt5 #1)
EIP is atlookup_symbol+0xe/0x31
eax: ffffffff ebx:f881a7d2ecx:c0332f3cedx:c03309d8
esi: 75010000 edi:f881a7d2ebp:f7f27ec0esp:f7f27e8c
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process insmod (pid: 293, threadinfo=f7f27000 task=f7f360f0 stack_left=3672 worst_left=-1)Stack: f882e520 000010a0 f881a7d2 c01356bd f7f27ebc f882e520 000010a0 f881a7d2 00000012 c013630c 00000001 f881752c 00000000 c0334284 f882abc0 000010a0 f881752c 0000008f c0136859 f882e520 00000000 f881931c f882e52c f882e52d Call Trace: [<c01356bd>] __find_symbol+0x21/0x1b3 (16) [<c013630c>] resolve_symbol+0x27/0x61 (24) [<c0136859>] simplify_symbols+0x85/0xf7 (36) [<c0137532>] load_module+0x73f/0xaf9 (32) [<c013373e>] try_to_take_rt_mutex+0x165/0x172 (20) [<c013792f>] sys_init_module+0x24/0x1a0 (16) [<c013794d>] sys_init_module+0x42/0x1a0 (144) [<c01032d3>] sysenter_past_esp+0x54/0x75 (16) Code: 01 85 c0 75 04 89 c8 eb 0e 0f b7 45 30 41 83 c2 28 39 c1 72 cbQuoted 4 lines
31 c0 5a 5b 5e 5f 5d c3 57 56 53 89 c3 39 ca 73 22 8b 72 04 89 df <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0
Quoted 3 lines
Whoops. 2.6.17-rc6-rt5 sorry. FWIW, Thomas' 2.6.17-rc6-hrt4 runs fine in isolation from the rt patchset.
Everything from 2.6.17-rc6-rt3 forward dies for sure on all my SMP boxes with the same error above. I also had problems with 2.6.17-rc6-rt1, but I can't say for sure if they were the same problems. I just haven't had time this week to dig into it much more.
Signature · 1 line
kr