Skip to contentSkip to conversation

PS/2 vs IDE problem on Athlon64 X2

DISCUSSION Rafael J. Wysocki 3 participants 4 messages Jun 10, 2006 – Jun 12, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

I have a machnine with Athlon64 X2 and AsRock 939Dual-SATA2 mobo (based on the ULI chipset) on which the PS/2 devices (keyboard and mouse) are in a bad correlation with IDE, or at least with the LiteOn DVD burner attached to it.

Namely, when the DVD drive is being used (eg. for burning a DVD in the background) the keyboard and mouse get a bit flaky. The mouse/keyboard response gets noticeably worse, some random key codes are generated and the mouse sometimes behaves as though a button was pressed (this happens when I move the mouse without touching the buttons).

I've been observing these symptoms for quite some time, at least with all of the recent -rc kernels, up to and including 2.6.17-rc6. Of course I can live with them and they seem to be related to the hardware, but I thought it might be a good idea to let you know.

I wonder if anyone has observed similar symptoms recently.

Also, if anyone's interested in more detailed information about the system, please tell me.

Greetings,
Rafael

#1 lore raw

RJW> I have a machnine with Athlon64 X2 and AsRock 939Dual-SATA2 mobo (based RJW> on the ULI chipset) on which the PS/2 devices (keyboard and mouse) are in a RJW> bad correlation with IDE, or at least with the LiteOn DVD burner attached to it.

I recently got the same mainboard and it works fine for me with CD reading/writing (LG CDRW, no DVD drive). Just tried yesterday, wrote a CD at speed 12 and then read it as fast as it could and I did not notice anything wrong. I'm using PS/2 keyboard and mouse and a very recent git kernel (2.6.17-rc6+...). Maybe the CD speed is not enough to trigger it.

Are you sure DMA was on?

Signature · 1 line
Meelis Roos
#2 lore raw
Quoted 9 lines · Meelis Roos

RJW> I have a machnine with Athlon64 X2 and AsRock 939Dual-SATA2 mobo (based RJW> on the ULI chipset) on which the PS/2 devices (keyboard and mouse) are in a RJW> bad correlation with IDE, or at least with the LiteOn DVD burner attached to it.

I recently got the same mainboard and it works fine for me with CD reading/writing (LG CDRW, no DVD drive). Just tried yesterday, wrote a CD at speed 12 and then read it as fast as it could and I did not notice anything wrong. I'm using PS/2 keyboard and mouse and a very recent git kernel (2.6.17-rc6+...). Maybe the CD speed is not enough to trigger it.

That would probably mean there's a hardware problem with my mobo. Well ...

Quoted 1 line

Are you sure DMA was on?

Yes.

Greetings,
Rafael

#3 lore raw
Quoted 6 lines · Rafael J. Wysocki
Quoted 5 lines · Meelis Roos

RJW> I have a machnine with Athlon64 X2 and AsRock 939Dual-SATA2 mobo (based RJW> on the ULI chipset) on which the PS/2 devices (keyboard and mouse) are in a RJW> bad correlation with IDE, or at least with the LiteOn DVD burner attached to it.

Quoted 7 lines
Quoted 5 lines

I recently got the same mainboard and it works fine for me with CD reading/writing (LG CDRW, no DVD drive). Just tried yesterday, wrote a CD at speed 12 and then read it as fast as it could and I did not notice anything wrong. I'm using PS/2 keyboard and mouse and a very recent git kernel (2.6.17-rc6+...). Maybe the CD speed is not enough to trigger it.

That would probably mean there's a hardware problem with my mobo. Well ...

This problem certainly sounds like a hardware fault. If you're not using the latest BIOS for this board, I suggest you upgrade it.

Signature · 5 lines
Cheers,
Alistair.

Third year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.