Skip to contentSkip to conversation

PC card RS-232 freezes the computer

DISCUSSION Karel Kulhavy 3 participants 3 messages Jun 12, 2006 – Jun 14, 2006

lore
Share & tools
lore
#0 lore raw

Hello

When I insert "2 port RS-232" PC card/PCMCIA/carbus/whatever card (86x53x6mm with a golden strip with 8 nipples and 2x34 connector) into my Dell Inspiron 510m notebook with 2.6.16.19, the computer freezes and continues working when I remove it.

The card label says "2 port RS-232 SUNIX Plug Into A Brand-new World S/N: CB 0077996 Made in Taiwan"

XMMS before freezing plays last 300ms 3 times again.

dmesg shows
pccard: CardBus card inserted into slot 0
pccard: card ejected from slot 0
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: b200004000000800

Is the kernel intended to behave this way? If yes, is there a way how to configure up the kernel so the computer doesn't freeze and the card can be examined with lspci?

CL<

#1 lore raw
Quoted 7 lines

Hello

When I insert "2 port RS-232" PC card/PCMCIA/carbus/whatever card (86x53x6mm with a golden strip with 8 nipples and 2x34 connector) into my Dell Inspiron 510m notebook with 2.6.16.19, the computer freezes and continues working when I remove it.

Try enabling CONFIG_ISA. I experienced the same lockup with a PCMCIA IDE CDROM drive and it was solved by enabling that one.

Quoted 16 lines

The card label says "2 port RS-232 SUNIX Plug Into A Brand-new World S/N: CB 0077996 Made in Taiwan"

XMMS before freezing plays last 300ms 3 times again.

dmesg shows
pccard: CardBus card inserted into slot 0
pccard: card ejected from slot 0
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: b200004000000800

Is the kernel intended to behave this way? If yes, is there a way how to configure up the kernel so the computer doesn't freeze and the card can be examined with lspci?

Quoted 7 lines

CL<
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Jan Engelhardt

Signature · 3 lines
| Software Engineer and Linux/Unix Network Administrator
| Alphagate Systems, http://alphagate.hopto.org/
| jengelh's site, http://jengelh.hopto.org/
#2 lore raw
In reply to Karel Kulhavy
Quoted 19 lines · Karel Kulhavy

Hello

When I insert "2 port RS-232" PC card/PCMCIA/carbus/whatever card (86x53x6mm with a golden strip with 8 nipples and 2x34 connector) into my Dell Inspiron 510m notebook with 2.6.16.19, the computer freezes and continues working when I remove it.

The card label says "2 port RS-232 SUNIX Plug Into A Brand-new World S/N: CB 0077996 Made in Taiwan"

XMMS before freezing plays last 300ms 3 times again.

dmesg shows
pccard: CardBus card inserted into slot 0
pccard: card ejected from slot 0
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: b200004000000800

Quoted 3 lines

Is the kernel intended to behave this way? If yes, is there a way how to configure up the kernel so the computer doesn't freeze and the card can be examined with lspci?

MCE means hardware problem. Perhaps kernel could do something to prevent it, but...
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html