Skip to contentSkip to conversation

sata_mv driver on 88sx6041 (kernel version 2.6.13)

DISCUSSION Narendra Hadke 2 participants 5 messages Jun 16, 2006 – Jun 30, 2006

lore
Share & tools
lore
#0 lore raw

Hi,
I am using sata_mv driver as exists in kernel 2.6.13, reached to a stage where after detecting the disk, control gets struck. Any ideas?
I see this driver is modified a lot in latest kernel
version. Will it help to patch with latest changes. Apreciate your help.

Here is the log:

........
........
RAMDISK driver initialized: 1 RAM disks of 500000K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
PCI: Enabling device 0000:00:0e.0 (0000 -> 0003)
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Enabling device 0000:00:0e.1 (0000 -> 0003)
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI: Enabling device 0000:00:0d.0 (0000 -> 0003)
ata1: SATA max PIO4 cmd 0x0 ctl 0x90011B0008022120 bmdma 0x0 irq 45
ata2: SATA max PIO4 cmd 0x0 ctl 0x90011B0008024120 bmdma 0x0 irq 45
ata3: SATA max PIO4 cmd 0x0 ctl 0x90011B0008026120 bmdma 0x0 irq 45
ata4: SATA max PIO4 cmd 0x0 ctl 0x90011B0008028120 bmdma 0x0 irq 45
ata1: no device found (phy stat 00000000) scsi0 : sata_mv
ata2: no device found (phy stat 00000000) scsi1 : sata_mv
ata3: dev 0 ATA, max UDMA/100, 156301488 sectors:
lba48
........
.......

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

#1 lore raw
Quoted 4 lines · Narendra Hadke

Hi,
I am using sata_mv driver as exists in kernel 2.6.13, reached to a stage where after detecting the disk, control gets struck. Any ideas?

No surprises there. The sata_mv driver is horribly buggy in all kernels prior to 2.6.16, and even there it still has some serious bugs. The 2.6.17 kernel version is MUCH better.

Cheers

#2 lore raw

Thanks.
I moved further with the 2.6.20 sata_mv driver. Here are the excerpts from dmesg with ata3 error messages as follows:

sata_mv 0000:00:0d.0: version

PCI: Enabling device 0000:00:0d.0 (0000 -> 0003)

sata_mv 0000:00:0d.0: 32 slots 4 ports SCSI mode IRQ via INTx

ata1: SATA max UDMA/133 cmd 0x0 ctl 0x80011B0008022120 bmdma 0x0 irq 45

ata2: SATA max UDMA/133 cmd 0x0 ctl 0x80011B0008024120 bmdma 0x0 irq 45

ata3: SATA max UDMA/133 cmd 0x0 ctl 0x80011B0008026120 bmdma 0x0 irq 45

ata4: SATA max UDMA/133 cmd 0x0 ctl 0x80011B0008028120 bmdma 0x0 irq 45

ata1: no device found (phy stat 00000000)

scsi0 : sata_mv
ata2: no device found (phy stat 00000000)

scsi1 : sata_mv
ata3: dev 0 ATA-6, max UDMA/133, 156301488 sectors:
LBA48

ata3: qc timeout (cmd 0xef)
ata3: failed to set xfermode, disabled

ata3: dev 0 configured for UDMA/133

scsi2 : sata_mv
ata4: no device found (phy stat 00000000)

scsi3 : sata_mv
physmap flash device: 800000 at 1f400000

What is the significance of the
ata3: qc timeout (cmd 0xef)
ata3: failed to set xfermode, disabled
I am not able to get to the drive as attach is not
happening yet.
Thanks for the help.
Narendra

Quoted 7 lines · --- Mark Lord
Quoted 2 lines · Narendra Hadke

Hi,
I am using sata_mv driver as exists in kernel

2.6.13,

Quoted 2 lines

reached to a stage where after detecting the disk, control gets struck. Any ideas?

Quoted 9 lines

No surprises there. The sata_mv driver is horribly buggy
in all kernels prior to 2.6.16, and even there it still has
some serious bugs. The 2.6.17 kernel version is MUCH better.

Cheers

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

#3 lore raw
In reply to Mark Lord

Hi,

In the latest driver sata_mv for 88SX6041, the disk
is detected but I don't see any attachs happening on this disk ie. something like this.
Attaching :scsi sda sda1 sda2
Did I miss anything in kernel configs?
Thanks
Narendra

Quoted 7 lines · --- Mark Lord
Quoted 2 lines · Narendra Hadke

Hi,
I am using sata_mv driver as exists in kernel

2.6.13,

Quoted 2 lines

reached to a stage where after detecting the disk, control gets struck. Any ideas?

Quoted 9 lines

No surprises there. The sata_mv driver is horribly buggy
in all kernels prior to 2.6.16, and even there it still has
some serious bugs. The 2.6.17 kernel version is MUCH better.

Cheers

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

#4 lore raw

Re: sata_mv driver on 88sx6041 (kernel version 2.6.14)

In reply to Mark Lord

Got it working. Thanks.
This works in PIO mode hence performance is horrible. I see the udma mode is set to 0 in driver 2.6.14 sata_mv version 0.12. Is is possible to Back port sata_mv from versin 2.6.17 to 2.6.14 to get a stable drive.
Please let me know.
Thanks,
Narendra

Quoted 7 lines · --- Mark Lord
Quoted 2 lines · Narendra Hadke

Hi,
I am using sata_mv driver as exists in kernel

2.6.13,

Quoted 2 lines

reached to a stage where after detecting the disk, control gets struck. Any ideas?

Quoted 9 lines

No surprises there. The sata_mv driver is horribly buggy
in all kernels prior to 2.6.16, and even there it still has
some serious bugs. The 2.6.17 kernel version is MUCH better.

Cheers

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com