USB/hal: USB open() broken? (USB CD burner underruns, USB HDD hard resets)
Hi all,
I'm having severe issues with cdrecord aborting with "buffer underrun" message, *always*. Problem nailed, see below.
AMD Athlon @1200 512MB
Debian testing
Linux 2.6.17-rc6-mm2 (newest, testing on 2.6.16ish and 2.6.15ish didn't make a difference)
cdrecord 4:2.01+01a03-3 (newest)
hal 0.5.7-2 (newest)
libhal-storage1 0.5.7-1 (newest)
libhal1 0.5.7-1 (newest)
burner:
Vendor: HL-DT-ST Model: DVDRAM GSA-4160B Rev: A306
Type: CD-ROM ANSI SCSI revision: 00
via:
Bus 001 Device 005: ID 0402:5621 ALi Corp. USB 2.0 Storage Device (that's the "HL-DT-ST" external case ID string given above) on USB 2.0 connector:
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
# lsmod (USB-related only) sd_mod 18560 2 sg 31772 0 sr_mod 16164 0 usb_storage 71880 1 scsi_mod 132876 4 sd_mod,sg,sr_mod,usb_storage uhci_hcd 23948 0 ehci_hcd 29964 0 usbcore 130844 4 usb_storage,uhci_hcd,ehci_hcd
# cat /proc/interrupts
CPU0
0: 14492818 IO-APIC-edge timer
1: 14298 IO-APIC-edge i8042
6: 3 IO-APIC-edge floppy
8: 4 IO-APIC-edge rtc
9: 0 IO-APIC-fasteoi acpi
12: 247193 IO-APIC-edge i8042
14: 172079 IO-APIC-edge ide0
16: 741075 IO-APIC-fasteoi radeon@pci:0000:01:00.0
19: 128123 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3,
uhci_hcd:usb4
20: 7235 IO-APIC-fasteoi au8830, eth1
21: 2 IO-APIC-fasteoi ohci1394
22: 13029 IO-APIC-fasteoi Aztech AZF3328 (PCI168), au8820
23: 0 IO-APIC-fasteoi VIA8233
NMI: 0
LOC: 14494370
ERR: 0
MIS: 0There's a /usr/lib/hal/hald-addon-storage running for this CD device:
nanosleep({2, 0}, {2, 0}) = 0 <2.000965>open("/dev/scsi/host2/bus0/target0/lun0/cd", O_RDONLY|O_NONBLOCK|O_EXCL|O_LARGEFILE) = 4 <0.002021> ioctl(4, CDROM_DRIVE_STATUS, 0x7fffffff) = 4 <0.001811>ioctl(4, CDROM_MEDIA_CHANGED, 0x7fffffff) = 0 <0.006341>ioctl(4, SG_IO, 0xbfdbc0c8) = 0 <0.002186>
close(4) = 0 <0.001087>rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 <0.000016>rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0 <0.000015> rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 <0.000015>
nanosleep({2, 0}, <unfinished ...>
It has a 2 second polling loop, and this is *exactly* the delay until cdrecord bombs with an "underrun" message:
Script started on Mo 26 Jun 2006 13:10:04 CEST
# cdrecord -speed=4 -dummy dev=2,0,0 -eject -
v ubuntu-6.06-desktop-i386.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[email protected]>.
The original author should not be bothered with problems of this version.cdrecord: Warning: Running on Linux-2.6.17-rc6-mm2
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. TOC Type: 1 = CD-ROM
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.5.33
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4160B'
Revision : 'A306'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 11837 kB/s 67x CD 8x DVD FIFO size : 4194304 = 4096 KB Track 01: data 697 MB Total size: 801 MB (79:23.98) = 357299 sectors Lout start: 801 MB (79:25/74) = 357299 sectors Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11700 (97:26/00) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change Manuf. index: 5 Manufacturer: FORNET INTERNATIONAL PTE LTD. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2550
Starting to write CD/DVD at speed 8 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF.
Starting new track at sector: 0
Track 01: 0 of 697 MB written.
Track 01: 1 of 697 MB written (fifo 100%) [buf 98%] 2.5x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 02 2E 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 06 90 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.004s timeout 40s
write track data: error after 1142784 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: Try to use 'driveropts=burnfree'.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
Writing time: 10.479s
Average write speed 457.0x.
Min drive buffer fill was 98%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 33.828s
cdrecord: fifo had 82 puts and 19 gets.
cdrecord: fifo was 0 times empty and 7 times full, min fill was 90%. #
Script done on Mo 26 Jun 2006 13:11:17 CEST
Killing the SCSI /usr/lib/hal/hald-addon-storage (after killing its hald-runner supervisor parent) lets (non-simulation) burning of a whole CD proceed properly...
However running a simple test program as a different non-root user:
#define __USE_LARGEFILE64
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
/* argh, still not defined... manually! */
# define O_LARGEFILE 0100000
int main () {
int fd;
fd = open("/dev/scsi/host2/bus0/target0/lun0/cd", O_RDONLY|O_NONBLOCK|O_EXCL|O_LARGEFILE);
printf("fd is %d\n", fd);
close(fd);
return 0;
}kills concurrent cdrecord burning (by root) on the spot.
Note that this still happens if I omit O_NONBLOCK, even though this yields me an invalid fd (-1)!.
Any other flag combination (even 0) does the same.
Thus it's clearly caused by open() handling itself.
Perfect DoS, if you ask me (but OTOH on many distro setups there probably won't be user access permissions for this device by default).
This might still be on the borders of tolerable under normal working conditions, but the fact that hald does an open() polling loop on it renders it catastrophic.
Note that I also had severe issues with a chinese "Cenda 201" USB OTG 40GB HDD device, I got USB bus reset every couple seconds, resulting in an audible drive head-park reset each time:
May 29 02:05:23 andi kernel: ehci_hcd 0000:00:10.3: qh deb16080 (#00) state 4 May 29 02:05:24 andi kernel: usb 4-2: reset high speed USB device using ehci_hcd and address 2 May 29 02:05:56 andi last message repeated 17 times May 29 02:06:57 andi last message repeated 32 times May 29 02:07:35 andi last message repeated 20 times May 29 02:07:37 andi kernel: ehci_hcd 0000:00:10.3: qh deb16200 (#00) state 4 May 29 02:07:37 andi kernel: usb 4-2: reset high speed USB device using ehci_hcd and address 2 May 29 02:07:43 andi last message repeated 3 times
Now that I found this I'd *bet* that this was exactly the same problem there (caused by HAL polling the device file).
I cannot quite believe that such a severe issue hasn't been noticed and fixed immediately by whichever person out there. Possibly this is a VIA-only (oh no, not again... ;) problem? (either USB controller chip or southbridge or so).
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
I don't think hal can do much about hald-addon-storage to prevent a simple open() from distorting a running device operation, so I'd tend to think that this is a kernel issue (perhaps in the USB host controller drivers).
Thanks,
Andreas Mohr
Quoted 2 lines · On Mon, 19 Jun 2006 10:21:54 +0200 Andreas Mohr <[email protected]>…
I'm having severe issues with cdrecord aborting with "buffer underrun" message, *always*. Problem nailed, see below.
[hald polling causes cdrecord to go bad on a USB CD drive]
One possible reason is that we're shooting down the device's pagecache by accident as a result of hald activity. This shouldn't happen, but still. Could you please do
watch -n1 cat /proc/meminfo' and/or vmstat 1'
then run cdrecord
then wait a bit
then run hald, see if the amount of pagecache (/proc/meminfo:Buffers or /proc/meminfo:Cached) suddenly decreases.
If the answer is "no" then I guess there's some unpleasant interaction happening at the USB level
Hi,
Quoted 11 lines · Andrew Morton
Quoted 2 lines · On Mon, 19 Jun 2006 10:21:54 +0200 Andreas Mohr <[email protected]>…
I'm having severe issues with cdrecord aborting with "buffer underrun" message, *always*. Problem nailed, see below.
[hald polling causes cdrecord to go bad on a USB CD drive]
One possible reason is that we're shooting down the device's pagecache by accident as a result of hald activity. This shouldn't happen, but still. Could you please do
[...]
Thanks, will do.
Just filed this as
http://bugzilla.kernel.org/show_bug.cgi?id=6722
due to no response here before.
(#6194 looks like it might be the same issue)
I'd suggest continuing discussion at bug #6722 from now.
Thanks,
Andreas Mohr
Signature · 4 lines
No programming skills!? Why not help translate many Linux applications! https://launchpad.ubuntu.com/rosetta (or alternatively buy nicely packaged Linux distros/OSS software to help support Linux developers creating shiny new things for you?)
Quoted 3 lines · On Tue, 20 Jun 2006 10:47:59 +0200 Andreas Mohr <[email protected]>…
Just filed this as
http://bugzilla.kernel.org/show_bug.cgi?id=6722
due to no response here before.
I saw it, which is why I hunted down this email. I hadn't even got that far into my lkml reading, actually. You should wait 2-3 days to be really sure that a bug is being ignored. Although with one like this, it's a fair bet that it will be.
Quoted 3 lines
(#6194 looks like it might be the same issue)
I'd suggest continuing discussion at bug #6722 from now.
No, I tend to think it's better to resort to bugzilla only after a few days, when the trail has gone cold.
Ar Maw, 2006-06-20 am 01:37 -0700, ysgrifennodd Andrew Morton:
Quoted 4 lines
[hald polling causes cdrecord to go bad on a USB CD drive]
One possible reason is that we're shooting down the device's pagecache by accident as a result of hald activity.
On IDE hal causes problems with some drives because the additional commands sent while the drive is busy end up timing out which triggers a bus reset and breaks everything. Really HAL should have better manners than to poll a drive that is busy.
Alan
Hi,
Quoted 10 lines · Alan Cox
Ar Maw, 2006-06-20 am 01:37 -0700, ysgrifennodd Andrew Morton:
Quoted 4 lines
[hald polling causes cdrecord to go bad on a USB CD drive]
One possible reason is that we're shooting down the device's pagecache by accident as a result of hald activity.
On IDE hal causes problems with some drives because the additional commands sent while the drive is busy end up timing out which triggers a bus reset and breaks everything. Really HAL should have better manners than to poll a drive that is busy.
But how would HAL safely determine whether a (IDE/USB) drive is busy? As my test app demonstrates (without HAL running), the *very first* open() happening during an ongoing burning operation will kill it instantly, in the USB case.
Are there any options left for HAL at all? Still seems to strongly point towards a kernel issue so far.
One (rather less desireable) way I can make up might be to have HAL keep the device open permanently and do an ioctl query on whether it's "busy" and then quickly close the device again before the newly started burning process gets disrupted (if this even properly works at all).
Andreas Mohr
Ar Maw, 2006-06-20 am 11:05 +0200, ysgrifennodd Andreas Mohr:
Quoted 6 lines
But how would HAL safely determine whether a (IDE/USB) drive is busy? As my test app demonstrates (without HAL running), the *very first*
open()happening during an ongoing burning operation will kill it instantly, in the USB case.
Are there any options left for HAL at all? Still seems to strongly point towards a kernel issue so far.
In the IDE space O_EXCL has the needed semantics. At least it does on Fedora and I don't think thats a Fedora patch, not sure if this is the case for the USB side of things.
Quoted 4 lines
One (rather less desireable) way I can make up might be to have HAL keep the device open permanently and do an ioctl query on whether it's "busy" and then quickly close the device again before the newly started burning process gets disrupted (if this even properly works at all).
O_EXCL used by cdrecord is probably the right thing
Quoted 11 lines · Andreas Mohr
But how would HAL safely determine whether a (IDE/USB) drive is busy? As my test app demonstrates (without HAL running), the *very first*
open()happening during an ongoing burning operation will kill it instantly, in the USB case.
Are there any options left for HAL at all? Still seems to strongly point towards a kernel issue so far.One (rather less desireable) way I can make up might be to have HAL keep the device open permanently and do an ioctl query on whether it's "busy" and then quickly close the device again before the newly started burning process gets disrupted (if this even properly works at all).
The open() call is not in itself the problem.
I would guess that the problem is sparked by the TEST UNIT READY command automatically sent when the device file is opened. Although a drive should have no difficulty handling this command while carrying out a burn, apparently yours aborts. In other words, this is likely to be a firmware problem in the CD drive.
I can't tell what's going on with the USB HDD since you haven't provided any information.
If you want to find out what's actually happening instead of just guessing, turn on CONFIG_USB_STORAGE_DEBUG and see what the kernel log has to say for the time when the underrun/reset occurs.
Alan Stern
Hi,
Quoted 14 lines · Alan Stern
Quoted 11 lines · Andreas Mohr
But how would HAL safely determine whether a (IDE/USB) drive is busy? As my test app demonstrates (without HAL running), the *very first*
open()happening during an ongoing burning operation will kill it instantly, in the USB case.
Are there any options left for HAL at all? Still seems to strongly point towards a kernel issue so far.One (rather less desireable) way I can make up might be to have HAL keep the device open permanently and do an ioctl query on whether it's "busy" and then quickly close the device again before the newly started burning process gets disrupted (if this even properly works at all).
Quoted 7 lines
The
open()call is not in itself the problem.I would guess that the problem is sparked by the TEST UNIT READY command automatically sent when the device file is opened. Although a drive should have no difficulty handling this command while carrying out a burn, apparently yours aborts. In other words, this is likely to be a firmware problem in the CD drive.
OK, at http://lisas.de/~andi/temp_usb/ there are logs:
debug.log.gz: burning, then running my open() test app: test app started at 22:43:49, disrupted burning process.
only_device_open.log.gz: device open() *only* (plus close()!),
no other USB activity such as burning happening (for comparison purposes, to see what a usual open()/close() is like)
only_device_open.log.gz (and close()!) contains:
- TEST_UNIT_READY (failure?)
- TEST_UNIT_READY
- TEST_UNIT_READY
- READ_TOC (failure?)
- ALLOW_MEDIUM_REMOVAL
- (unknown command) !!!!!!!
- TEST_UNIT_READY
- READ_TOC (failure?)
- READ_TOC (failure?)
- READ_CAPACITY
- ALLOW_MEDIUM_REMOVAL
Hmm, multiple failures in there: might be cable issues??
debug.log.gz contains:
*** ongoing burning: ***
- lots of WRITE_10 (NO failure!)
- READ BUFFER CAPACITY
- lots of WRITE_10 (NO failure!)
- READ BUFFER CAPACITY
- a couple WRITE_10 (NO failure!)
*** [22:43:49] device open(): ***
- TEST_UNIT_READY (ok!)
- WRITE_10 (ok!!)
- TEST_UNIT_READY (ok!)
- WRITE_10 (ok!)
- READ_TOC (*** ERROR!! ***)
- WRITE_10 (ok!)
- ALLOW_MEDIUM_REMOVAL (ok!)
- WRITE_10 (*** FAILURE! ***)
- going downhill from here...
So what could be the problem here?READ_TOC might be it, but then it might be fully ok to have it fail (after all it's non-valid data content), so ALLOW_MEDIUM_REMOVAL would be the problem then? (next WRITE_10 FAILS!).
I could be totally wrong, though, since I don't have much storage debugging experience.
A good idea would be to further check whether it's the open() or the close() which disrupts burning for me.
Quoted 2 lines
I can't tell what's going on with the USB HDD since you haven't provided any information.
I'd like to, but can't since I don't have device access any more.
Oh, and that burner_switchoff_oops.jpg in the same directory
is an OOPS that happened when I tried to blank a CDRW,
then cancelled the operation (2x Ctrl-C on cdrecord),
but then had HAL device polling daemon and my test app block on I/O wait on the device that continued blanking the CDRW. Since I then didn't want to wait for the blanking to finish I had to switch off the device: immediate OOPS, possibly due to mis-handling the two processes still waiting on a busy device which then got switched off completely. Kernel 2.6.17-rc6-mm2.
Thanks!
Andreas Mohr
Quoted 9 lines · Andreas Mohr
OK, at http://lisas.de/~andi/temp_usb/ there are logs:
debug.log.gz: burning, then running myopen()test app: test app started at 22:43:49, disrupted burning process.
only_device_open.log.gz: deviceopen()*only* (plusclose()!),
no other USB activity such as burning happening (for comparison purposes, to see what a usual open()/close() is like)only_device_open.log.gz (and
close()!) contains:
-TEST_UNIT_READY(failure?)
Normal failure. This indicates that the media has been changed since the last I/O operation.
Quoted 3 lines
-
TEST_UNIT_READY
-TEST_UNIT_READY
-READ_TOC(failure?)
I don't know why this failed. Maybe the disc didn't have a valid Table of Contents.
Quoted 5 lines
-
ALLOW_MEDIUM_REMOVAL
- (unknown command) !!!!!!!
-TEST_UNIT_READY
-READ_TOC(failure?)
-READ_TOC(failure?)
These failed for the same reason as the earlier READ_TOC.
Quoted 4 lines
-
READ_CAPACITY
-ALLOW_MEDIUM_REMOVALHmm, multiple failures in there: might be cable issues??
No. If the cable was a problem then all the commands (not just READ_TOC) would have gotten errors (not failures).
Quoted 5 lines
debug.log.gz contains:
*** ongoing burning: ***
- lots ofWRITE_10(NO failure!)
- READ BUFFER CAPACITY
- lots ofWRITE_10(NO failure!)
Quoted 8 lines
- READ BUFFER CAPACITY
- a coupleWRITE_10(NO failure!)
*** [22:43:49] deviceopen(): ***
-TEST_UNIT_READY(ok!)
-WRITE_10(ok!!)
-TEST_UNIT_READY(ok!)
-WRITE_10(ok!)
-READ_TOC(*** ERROR!! ***)
This was a different sort of error. The code was "Logical unit not ready, long write in progress", which makes sense.
Quoted 10 lines
-
WRITE_10(ok!)
-ALLOW_MEDIUM_REMOVAL(ok!)
-WRITE_10(*** FAILURE! ***)
- going downhill from here...So what could be the problem here?
READ_TOCmight be it, but then it might be fully ok to have it fail (after all it's non-valid data content), soALLOW_MEDIUM_REMOVALwould be the problem then? (nextWRITE_10FAILS!).
It sure does look like the ALLOW_MEDIUM_REMOVAL is the cause of the problem.
Quoted 6 lines
I could be totally wrong, though, since I don't have much storage debugging experience.
A good idea would be to further check whether it's the
open()or theclose()which disrupts burning for me.
Yep. The ALLOW_MEDIUM_REMOVAL occurs as part of handling the close(). And you can understand a CD drive not wanting to carry out a long write when the door is unlocked.
The real problem seems to be that the device is reachable in two different ways, and they don't implement proper mutual exclusion. HAL (or your test program) is undoubtedly using /dev/sr0 or something similar, whereas cdrecord uses /dev/sg0. Going through two different drivers, it's no surprise they wind up interfering with each other.
Quoted 8 lines
Oh, and that burner_switchoff_oops.jpg in the same directory
is an OOPS that happened when I tried to blank a CDRW,
then cancelled the operation (2x Ctrl-C on cdrecord),
but then had HAL device polling daemon and my test app block on I/O wait on the device that continued blanking the CDRW. Since I then didn't want to wait for the blanking to finish I had to switch off the device: immediate OOPS, possibly due to mis-handling the two processes still waiting on a busy device which then got switched off completely. Kernel 2.6.17-rc6-mm2.
Unfortunately I can't debug this without seeing the start of the oops message.
Alan Stern
Hi,
Quoted 7 lines · Alan Stern
Quoted 3 lines · Andreas Mohr
-
TEST_UNIT_READY
-TEST_UNIT_READY
-READ_TOC(failure?)I don't know why this failed. Maybe the disc didn't have a valid Table of Contents.
Ah, silly me, I should have stated that this was a simulation burn on an otherwise rather blank disc ;)
Quoted 6 lines
Quoted 6 lines
-
WRITE_10(ok!)
-ALLOW_MEDIUM_REMOVAL(ok!)
-WRITE_10(*** FAILURE! ***)
- going downhill from here...
Quoted 7 lines
Quoted 4 lines
So what could be the problem here?
READ_TOCmight be it, but then it might be fully ok to have it fail (after all it's non-valid data content), soALLOW_MEDIUM_REMOVALwould be the problem then? (nextWRITE_10FAILS!).It sure does look like the
ALLOW_MEDIUM_REMOVALis the cause of the problem.
Yup, already was quite sure of that after having written the previous mail.
I'll try to verify this by simply removing all ALLOW_MEDIUM_REMOVAL calls ;)
Quoted 11 lines
Quoted 6 lines
I could be totally wrong, though, since I don't have much storage debugging experience.
A good idea would be to further check whether it's the
open()or theclose()which disrupts burning for me.Yep. The
ALLOW_MEDIUM_REMOVALoccurs as part of handling theclose(). And you can understand a CD drive not wanting to carry out a long write when the door is unlocked.
Quoted 5 lines
The real problem seems to be that the device is reachable in two different ways, and they don't implement proper mutual exclusion. HAL (or your test program) is undoubtedly using
/dev/sr0or something similar, whereas cdrecord uses/dev/sg0. Going through two different drivers, it's no surprise they wind up interfering with each other.
HAL is /dev/host0/.../cd
cdrecord is -dev=0,0,0 (whatever Linux device file this translates into) or a similar device ID as returned by -scanbus.
Probably (stating the obvious here, I'm afraid) we should only send non-ALLOW_MEDIUM_REMOVAL for the *very first* device open,
and then send ALLOW_MEDIUM_REMOVAL after the *very last* device close only.
So you think that with sr and sg drivers both talking to the device, proper inter-driver device tracking is not doable or quite difficult to implement?
Quoted 2 lines
Unfortunately I can't debug this without seeing the start of the oops message.
[OOPS output of a *different* issue]
Right, it's a rather incomplete OOPS. Let me try to get one with a nice long-line VGA mode soon...
Thanks!
Andreas Mohr
Quoted 7 lines · Andreas Mohr
Quoted 5 lines
The real problem seems to be that the device is reachable in two different ways, and they don't implement proper mutual exclusion. HAL (or your test program) is undoubtedly using
/dev/sr0or something similar, whereas cdrecord uses/dev/sg0. Going through two different drivers, it's no surprise they wind up interfering with each other.HAL is
/dev/host0/.../cd
That goes through the sr driver.
Quoted 2 lines
cdrecord is -dev=0,0,0 (whatever Linux device file this translates into) or a similar device ID as returned by -scanbus.
That goes through the sg driver.
Quoted 7 lines
Probably (stating the obvious here, I'm afraid) we should only send non-ALLOW_MEDIUM_REMOVAL for the *very first* device open,
and then sendALLOW_MEDIUM_REMOVALafter the *very last* device close only.So you think that with sr and sg drivers both talking to the device, proper inter-driver device tracking is not doable or quite difficult to implement?
Well, it's not being done now. I suspect it wouldn't be too difficult technically. The hardest part might be to obtain the agreement of the SCSI and CDROM developers. :-)
Alan Stern
Ar Mer, 2006-06-21 am 15:06 -0400, ysgrifennodd Alan Stern:
Quoted 4 lines
Quoted 2 lines
cdrecord is -dev=0,0,0 (whatever Linux device file this translates into) or a similar device ID as returned by -scanbus.
That goes through the sg driver.
Use a cdrecord that understands SG_IO and dev=/dev/sr0
Quoted 1 line · Andreas Mohr
I'll try to verify this by simply removing all
ALLOW_MEDIUM_REMOVALcalls ;)
Try to burn with ub. It does not implement door locking.
-- Pete
Hi,
Quoted 16 lines · Andrew Morton
Quoted 2 lines · On Mon, 19 Jun 2006 10:21:54 +0200 Andreas Mohr <[email protected]>…
I'm having severe issues with cdrecord aborting with "buffer underrun" message, *always*. Problem nailed, see below.
[hald polling causes cdrecord to go bad on a USB CD drive]
One possible reason is that we're shooting down the device's pagecache by accident as a result of hald activity. This shouldn't happen, but still. Could you please do
watch -n1 cat /proc/meminfo' and/orvmstat 1'then run cdrecord
Quoted 7 lines
then wait a bit
then run hald, see if the amount of pagecache (/proc/meminfo:Buffers or /proc/meminfo:Cached) suddenly decreases.
If the answer is "no" then I guess there's some unpleasant interaction happening at the USB level
"no":
both values don't show any noticeable decrease whatsoever upon a second parallel open() of the device which makes burning abort.
It seems to be a USB thingy, as I will show in my next mail.
Andreas Mohr