Skip to contentSkip to conversation

PC speaker doesn't work

x86_64 Piotr Kaczuba 3 participants 4 messages Jun 19, 2006 – Jun 22, 2006

lore
Share & tools
lore
#0 lore raw

Hello!

With 2.6.17 the PC speaker stopped working (2.6.16.20 was fine). The module pcspkr is loaded but dmesg doesn't show that it gets registered as 2.6.16 did:

input: PC Speaker as /class/input/input2

I saw a thread about the speaker issue a while ago in which a patch was posted that made it into 2.6.17 but somehow it doesn't seem to be enough. Am I missing something?

I'm running x86-64 kernel with 32-bit userspace if that should matter.

Please CC me as I'm not subscribed.

Piotr Kaczuba

#1 lore raw

It turned out that the following change is needed when the speaker is compiled as a module.

Piotr Kaczuba

arch/x86_64/kernel/setup.c +1 -1
diff -u -r linux.old/arch/x86_64/kernel/setup.c linux/arch/x86_64/kernel/setup.c
@@ -1440,7 +1440,7 @@
 	.show =	show_cpuinfo,
 };
 
-#ifdef CONFIG_INPUT_PCSPKR
+#if defined(CONFIG_INPUT_PCSPKR) || defined(CONFIG_INPUT_PCSPKR_MODULE)
 #include <linux/platform_device.h>
 static __init int add_pcspkr(void)
 {
#2 lore raw

You know, I am glad you posted this, as my system bell stopped working ages ago and I didn't know why (I am on x86 though).

So this post is in case anybody else has this peculiar problem.

I didn't have a CONFIG_INPUT_PCSPKR in my .config, so investigated...

It is cunningly hidden in Device Drivers->Input device support->Miscellaneous devices->PC Speaker support

Then to get KDE to use it (I used KDE sound to *beep* before I sussed this tonight), even more peculiar configuration is required:

http://lists.kde.org/?l=kde-accessibility&m=110963809201407&w=2

All now works! I did really miss the beeps for some silly reason...

Nick