Skip to contentSkip to conversation

mark virt_to_bus/bus_to_virt as __deprecated on i386

PATCH In review Adrian Bunk 5 participants 13 messages Jun 26, 2006 – Jun 27, 2006 Char and misc drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mark virt_to_bus/bus_to_virt as __deprecated on i386

virt_to_bus/bus_to_virt are long deprecated, mark them as __deprecated on i386.

Without such warnings people will never update their code and fix the errors in PPC64 builds.

And yes, some of the drivers affected are maintained.

This also ctches accidential additions of users for these functions like a usage of bus_to_virt() in the infiniband code that was added in 2.6.17-rc1 (already removed).

This patch increases the number of warnings shown during builds, but it seems worth including it at least in -mm for making people aware of this issue.

---

This patch was already sent on:
- 27 Apr 2006
- 19 Apr 2006
- 6 Jan 2006
- 13 Dec 2005
- 23 Nov 2005
- 18 Nov 2005
- 12 Nov 2005

include/asm-i386/io.h renamed from include/asm-i386/io.h.old +8 -2
@@ -144,8 +144,14 @@
  *
  * Allow them on x86 for legacy drivers, though.
  */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
+static inline unsigned long __deprecated virt_to_bus(volatile void * address)
+{
+	return __pa(address);
+}
+static inline void * __deprecated bus_to_virt(unsigned long address)
+{
+	return __va(address);
+}
 
 /*
  * readX/writeX() are used to access memory mapped devices. On some
#1 lore raw

Ar Llu, 2006-06-26 am 17:10 +0200, ysgrifennodd Adrian Bunk:

Quoted 5 lines

virt_to_bus/bus_to_virt are long deprecated, mark them as __deprecated on i386.

Without such warnings people will never update their code and fix the errors in PPC64 builds.

Most of the uses of virt_to_bus/bus_to_virt are hardware that isn't even available on obscure platforms like PPC64. Would still be good to get these in and nailed.

#2 lore raw
In reply to Adrian Bunk
Quoted 5 lines · Adrian Bunk

virt_to_bus/bus_to_virt are long deprecated, mark them as __deprecated on i386.

Without such warnings people will never update their code and fix the errors in PPC64 builds.

.. and deprecating pm_send_all, cli, sti, restore_flags, check_region yadayada has really been a great success at motivating people to fix those up too.

How about we fix up some of the existing noise before we add more? A build log of a fedora kernel I had handy shows 165 deprecated warnings that have been there forever. Your proposal will add over 500 warnings in drivers/ alone.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#3 lore raw
Quoted 9 lines · Dave Jones
Quoted 5 lines · Adrian Bunk

virt_to_bus/bus_to_virt are long deprecated, mark them as __deprecated on i386.

Without such warnings people will never update their code and fix the errors in PPC64 builds.

.. and deprecating pm_send_all, cli, sti, restore_flags, check_region yadayada has really been a great success at motivating people to fix those up too.

cli/sti should just be removed, or at least have those drivers marked BROKEN... nobody is apparently using them anyway...

Maybe depreciation needs to go together with a "will mark users broken in X days, and will remove entirely in X+Y days".. and then stick to it.

#4 lore raw
Quoted 5 lines · Arjan van de Ven
Quoted 4 lines · Dave Jones
Quoted 3 lines · Adrian Bunk

virt_to_bus/bus_to_virt are long deprecated, mark them as __deprecated on i386.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

Without such warnings people will never update their code and fix the errors in PPC64 builds.

.. and deprecating pm_send_all, cli, sti, restore_flags, check_region yadayada has really been a great success at motivating people to fix those up too.

cli/sti should just be removed, or at least have those drivers marked BROKEN... nobody is apparently using them anyway...

Just ISDN really.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#10 lore raw
In reply to Dave Jones
Quoted 9 lines · Dave Jones
Quoted 5 lines · Adrian Bunk

virt_to_bus/bus_to_virt are long deprecated, mark them as __deprecated on i386.

Without such warnings people will never update their code and fix the errors in PPC64 builds.

.. and deprecating pm_send_all, cli, sti, restore_flags, check_region yadayada has really been a great success at motivating people to fix those up too.

It has been a success, look at the numbers:

2.6.0 : 36 options depending on BROKEN_ON_SMP
2.6.17-mm2: 17 options depending on BROKEN_ON_SMP

2.6.7-mm7 : 20 drivers with warnings due to check_region 2.6.17-mm2: 3 drivers with warnings due to check_region

It's not that everything was fixed immediately, but there is definitely some progress.

Quoted 4 lines

How about we fix up some of the existing noise before we add more? A build log of a fedora kernel I had handy shows 165 deprecated warnings that have been there forever. Your proposal will add over 500 warnings in drivers/ alone.

There are few drivers generating many warnings, e.g. stallion+istallion alone give 138 __deprecated warnings only for cli/sti/restore_flags usage. Most of the code doesn't have any problems.

And my main motivation for getting virt_to_bus/bus_to_virt removed is the following:

If the virt_to_bus/bus_to_virt are fixed, Andrew might finally accept my patch to add -Werror-implicit-function-declaration to the CFLAGS (which he only rejected since it turned link errors into compile errors in his ppc64 builds).

And -Werror-implicit-function-declaration is important since it will turn some nasty to debug runtime stack corruptions into compile errors.

Quoted 1 line

Dave

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#11 lore raw
Quoted 4 lines · Adrian Bunk

If the virt_to_bus/bus_to_virt are fixed, Andrew might finally accept my patch to add -Werror-implicit-function-declaration to the CFLAGS (which he only rejected since it turned link errors into compile errors in his ppc64 builds).

Indeed. That was so useful in fact that I added the same to the Fedora kernel quite some time back. Having a build fail in the first few minutes is much preferable to having it fail after 15 minutes.

I've not encountered any breakage due to that for some time though. Though perhaps Andrew had config options enabled that we disabled in our builds.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#12 lore raw

PATCH: stallion clean up: Re: [2.6 patch] mark virt_to_bus/bus_to_virt as __deprecated on i386

In reply to Adrian Bunk
Quoted 3 lines

There are few drivers generating many warnings, e.g. stallion+istallion alone give 138 __deprecated warnings only for cli/sti/restore_flags usage. Most of the code doesn't have any problems.

Stallion locking is easy to fix as far as I can tell. I've left the wake/sleep stuff for a janitor project

There are two locking sets involved. One locks the board mappings and the other is the tty open/close locking. The low level code was clearly designed to be ported to OS's with spin locks already so pretty much comes out in the wash

drivers/char/stallion.c +86 -122
@@ -141,15 +141,6 @@
 static struct tty_driver	*stl_serial;
 
 /*
- *	We will need to allocate a temporary write buffer for chars that
- *	come direct from user space. The problem is that a copy from user
- *	space might cause a page fault (typically on a system that is
- *	swapping!). All ports will share one buffer - since if the system
- *	is already swapping a shared buffer won't make things any worse.
- */
-static char			*stl_tmpwritebuf;
-
-/*
  *	Define a local default termios struct. All ports will be created
  *	with this termios initially. Basically all it defines is a raw port
  *	at 9600, 8 data bits, 1 stop bit.
@@ -363,6 +354,14 @@
 };
 
 /*
+ *	Lock ordering is that you may not take stallion_lock holding
+ *	brd_lock.
+ */
+ 
+static spinlock_t brd_lock; 		/* Guard the board mapping */
+static spinlock_t stallion_lock;	/* Guard the tty driver */
+
+/*
  *	Set up enable and disable macros for the ECH boards. They require
  *	the secondary io address space to be activated and deactivated.
  *	This way all ECH boards can share their secondary io region.
@@ -725,17 +724,7 @@
 
 static int __init stallion_module_init(void)
 {
-	unsigned long	flags;
-
-#ifdef DEBUG
-	printk("init_module()\n");
-#endif
-
-	save_flags(flags);
-	cli();
 	stl_init();
-	restore_flags(flags);
-
 	return 0;
 }
 
@@ -746,7 +735,6 @@
 	stlbrd_t	*brdp;
 	stlpanel_t	*panelp;
 	stlport_t	*portp;
-	unsigned long	flags;
 	int		i, j, k;
 
 #ifdef DEBUG
@@ -756,9 +744,6 @@
 	printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle,
 		stl_drvversion);
 
-	save_flags(flags);
-	cli();
-
 /*
  *	Free up all allocated resources used by the ports. This includes
  *	memory and interrupts. As part of this process we will also do
@@ -770,7 +755,6 @@
 	if (i) {
 		printk("STALLION: failed to un-register tty driver, "
 			"errno=%d\n", -i);
-		restore_flags(flags);
 		return;
 	}
 	for (i = 0; i < 4; i++) {
@@ -783,8 +767,6 @@
 			"errno=%d\n", -i);
 	class_destroy(stallion_class);
 
-	kfree(stl_tmpwritebuf);
-
 	for (i = 0; (i < stl_nrbrds); i++) {
 		if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL)
 			continue;
@@ -814,8 +796,6 @@
 		kfree(brdp);
 		stl_brds[i] = (stlbrd_t *) NULL;
 	}
-
-	restore_flags(flags);
 }
 
 module_init(stallion_module_init);
@@ -948,7 +928,7 @@
 
 	brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL);
 	if (!brdp) {
-		printk("STALLION: failed to allocate memory (size=%d)\n",
+		printk("STALLION: failed to allocate memory (size=%Zd)\n",
 			sizeof(stlbrd_t));
 		return NULL;
 	}
@@ -1066,16 +1046,17 @@
 	rc = 0;
 	doclocal = 0;
 
+	spin_lock_irqsave(&stallion_lock, flags);
+
 	if (portp->tty->termios->c_cflag & CLOCAL)
 		doclocal++;
 
-	save_flags(flags);
-	cli();
 	portp->openwaitcnt++;
 	if (! tty_hung_up_p(filp))
 		portp->refcount--;
 
 	for (;;) {
+		/* Takes brd_lock internally */
 		stl_setsignals(portp, 1, 1);
 		if (tty_hung_up_p(filp) ||
 		    ((portp->flags & ASYNC_INITIALIZED) == 0)) {
@@ -1093,13 +1074,14 @@
 			rc = -ERESTARTSYS;
 			break;
 		}
+		/* FIXME */
 		interruptible_sleep_on(&portp->open_wait);
 	}
 
 	if (! tty_hung_up_p(filp))
 		portp->refcount++;
 	portp->openwaitcnt--;
-	restore_flags(flags);
+	spin_unlock_irqrestore(&stallion_lock, flags);
 
 	return rc;
 }
@@ -1119,16 +1101,15 @@
 	if (portp == (stlport_t *) NULL)
 		return;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&stallion_lock, flags);
 	if (tty_hung_up_p(filp)) {
-		restore_flags(flags);
+		spin_unlock_irqrestore(&stallion_lock, flags);
 		return;
 	}
 	if ((tty->count == 1) && (portp->refcount != 1))
 		portp->refcount = 1;
 	if (portp->refcount-- > 1) {
-		restore_flags(flags);
+		spin_unlock_irqrestore(&stallion_lock, flags);
 		return;
 	}
 
@@ -1142,11 +1123,18 @@
  *	(The sc26198 has no "end-of-data" interrupt only empty FIFO)
  */
 	tty->closing = 1;
+	
+	spin_unlock_irqrestore(&stallion_lock, flags);
+	
 	if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		tty_wait_until_sent(tty, portp->closing_wait);
 	stl_waituntilsent(tty, (HZ / 2));
 
+
+	spin_lock_irqsave(&stallion_lock, flags);
 	portp->flags &= ~ASYNC_INITIALIZED;
+	spin_unlock_irqrestore(&stallion_lock, flags);
+	
 	stl_disableintrs(portp);
 	if (tty->termios->c_cflag & HUPCL)
 		stl_setsignals(portp, 0, 0);
@@ -1173,7 +1161,6 @@
 
 	portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 	wake_up_interruptible(&portp->close_wait);
-	restore_flags(flags);
 }
 
 /*****************************************************************************/
@@ -1195,9 +1182,6 @@
 		(int) tty, (int) buf, count);
 #endif
 
-	if ((tty == (struct tty_struct *) NULL) ||
-	    (stl_tmpwritebuf == (char *) NULL))
-		return 0;
 	portp = tty->driver_data;
 	if (portp == (stlport_t *) NULL)
 		return 0;
@@ -1302,11 +1286,6 @@
 	if (portp->tx.buf == (char *) NULL)
 		return;
 
-#if 0
-	if (tty->stopped || tty->hw_stopped ||
-	    (portp->tx.head == portp->tx.tail))
-		return;
-#endif
 	stl_startrxtx(portp, -1, 1);
 }
 
@@ -1977,12 +1956,14 @@
 	unsigned int	iobase;
 	int		handled = 0;
 
+	spin_lock(&brd_lock);
 	panelp = brdp->panels[0];
 	iobase = panelp->iobase;
 	while (inb(brdp->iostatus) & EIO_INTRPEND) {
 		handled = 1;
 		(* panelp->isr)(panelp, iobase);
 	}
+	spin_unlock(&brd_lock);
 	return handled;
 }
 
@@ -2168,7 +2149,7 @@
 		portp = kzalloc(sizeof(stlport_t), GFP_KERNEL);
 		if (!portp) {
 			printk("STALLION: failed to allocate memory "
-				"(size=%d)\n", sizeof(stlport_t));
+				"(size=%Zd)\n", sizeof(stlport_t));
 			break;
 		}
 
@@ -2304,7 +2285,7 @@
 	panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
 	if (!panelp) {
 		printk(KERN_WARNING "STALLION: failed to allocate memory "
-			"(size=%d)\n", sizeof(stlpanel_t));
+			"(size=%Zd)\n", sizeof(stlpanel_t));
 		return -ENOMEM;
 	}
 
@@ -2478,7 +2459,7 @@
 		panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
 		if (!panelp) {
 			printk("STALLION: failed to allocate memory "
-				"(size=%d)\n", sizeof(stlpanel_t));
+				"(size=%Zd)\n", sizeof(stlpanel_t));
 			break;
 		}
 		panelp->magic = STL_PANELMAGIC;
@@ -2879,8 +2860,7 @@
 	portp->stats.lflags = 0;
 	portp->stats.rxbuffered = 0;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&stallion_lock, flags);
 	if (portp->tty != (struct tty_struct *) NULL) {
 		if (portp->tty->driver_data == portp) {
 			portp->stats.ttystate = portp->tty->flags;
@@ -2894,7 +2874,7 @@
 			}
 		}
 	}
-	restore_flags(flags);
+	spin_unlock_irqrestore(&stallion_lock, flags);
 
 	head = portp->tx.head;
 	tail = portp->tx.tail;
@@ -3056,14 +3036,6 @@
 		return -1;
 
 /*
- *	Allocate a temporary write buffer.
- */
-	stl_tmpwritebuf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
-	if (!stl_tmpwritebuf)
-		printk("STALLION: failed to allocate memory (size=%d)\n",
-			STL_TXBUFSIZE);
-
-/*
  *	Set up a character driver for per board stuff. This is mainly used
  *	to do stats ioctls on the ports.
  */
@@ -3147,11 +3119,13 @@
 	unsigned int	gfrcr;
 	int		chipmask, i, j;
 	int		nrchips, uartaddr, ioaddr;
+	unsigned long   flags;
 
 #ifdef DEBUG
 	printk("stl_panelinit(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp);
 #endif
 
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(panelp->brdnr, panelp->pagenr);
 
 /*
@@ -3189,6 +3163,7 @@
 	}
 
 	BRDDISABLE(panelp->brdnr);
+	spin_unlock_irqrestore(&brd_lock, flags);
 	return chipmask;
 }
 
@@ -3200,6 +3175,7 @@
 
 static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp)
 {
+	unsigned long flags;
 #ifdef DEBUG
 	printk("stl_cd1400portinit(brdp=%x,panelp=%x,portp=%x)\n",
 		(int) brdp, (int) panelp, (int) portp);
@@ -3209,6 +3185,7 @@
 	    (portp == (stlport_t *) NULL))
 		return;
 
+	spin_lock_irqsave(&brd_lock, flags);
 	portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) ||
 		(portp->portnr < 8)) ? 0 : EREG_BANKSIZE);
 	portp->uartaddr = (portp->portnr & 0x04) << 5;
@@ -3219,6 +3196,7 @@
 	stl_cd1400setreg(portp, LIVR, (portp->portnr << 3));
 	portp->hwid = stl_cd1400getreg(portp, GFRCR);
 	BRDDISABLE(portp->brdnr);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3428,8 +3406,7 @@
 		tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
 #endif
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3));
 	srer = stl_cd1400getreg(portp, SRER);
@@ -3466,7 +3443,7 @@
 		portp->sigs &= ~TIOCM_CD;
 	stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron));
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3492,8 +3469,7 @@
 	if (rts > 0)
 		msvr2 = MSVR2_RTS;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 	if (rts >= 0)
@@ -3501,7 +3477,7 @@
 	if (dtr >= 0)
 		stl_cd1400setreg(portp, MSVR1, msvr1);
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3520,14 +3496,13 @@
 	printk("stl_cd1400getsignals(portp=%x)\n", (int) portp);
 #endif
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 	msvr1 = stl_cd1400getreg(portp, MSVR1);
 	msvr2 = stl_cd1400getreg(portp, MSVR2);
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 
 	sigs = 0;
 	sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0;
@@ -3569,15 +3544,14 @@
 	else if (rx > 0)
 		ccr |= CCR_RXENABLE;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 	stl_cd1400ccrwait(portp);
 	stl_cd1400setreg(portp, CCR, ccr);
 	stl_cd1400ccrwait(portp);
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3609,8 +3583,7 @@
 	else if (rx > 0)
 		sreron |= SRER_RXDATA;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 	stl_cd1400setreg(portp, SRER,
@@ -3618,7 +3591,7 @@
 	BRDDISABLE(portp->brdnr);
 	if (tx > 0)
 		set_bit(ASYI_TXBUSY, &portp->istate);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3634,13 +3607,12 @@
 #ifdef DEBUG
 	printk("stl_cd1400disableintrs(portp=%x)\n", (int) portp);
 #endif
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 	stl_cd1400setreg(portp, SRER, 0);
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3653,8 +3625,7 @@
 	printk("stl_cd1400sendbreak(portp=%x,len=%d)\n", (int) portp, len);
 #endif
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 	stl_cd1400setreg(portp, SRER,
@@ -3664,7 +3635,7 @@
 	portp->brklen = len;
 	if (len == 1)
 		portp->stats.txbreaks++;
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3688,8 +3659,7 @@
 	if (tty == (struct tty_struct *) NULL)
 		return;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 
@@ -3729,7 +3699,7 @@
 	}
 
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3753,8 +3723,7 @@
 	if (tty == (struct tty_struct *) NULL)
 		return;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 	if (state) {
@@ -3769,7 +3738,7 @@
 		stl_cd1400ccrwait(portp);
 	}
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3785,8 +3754,7 @@
 	if (portp == (stlport_t *) NULL)
 		return;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
 	stl_cd1400ccrwait(portp);
@@ -3794,7 +3762,7 @@
 	stl_cd1400ccrwait(portp);
 	portp->tx.tail = portp->tx.head;
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -3833,6 +3801,7 @@
 		(int) panelp, iobase);
 #endif
 
+	spin_lock(&brd_lock);
 	outb(SVRR, iobase);
 	svrtype = inb(iobase + EREG_DATA);
 	if (panelp->nrports > 4) {
@@ -3846,6 +3815,8 @@
 		stl_cd1400txisr(panelp, iobase);
 	else if (svrtype & SVRR_MDM)
 		stl_cd1400mdmisr(panelp, iobase);
+		
+	spin_unlock(&brd_lock);
 }
 
 /*****************************************************************************/
@@ -4433,8 +4404,7 @@
 		tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
 #endif
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_sc26198setreg(portp, IMR, 0);
 	stl_sc26198updatereg(portp, MR0, mr0);
@@ -4461,7 +4431,7 @@
 	portp->imr = (portp->imr & ~imroff) | imron;
 	stl_sc26198setreg(portp, IMR, portp->imr);
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4491,13 +4461,12 @@
 	else if (rts > 0)
 		iopioron |= IPR_RTS;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_sc26198setreg(portp, IOPIOR,
 		((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron));
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4516,12 +4485,11 @@
 	printk("stl_sc26198getsignals(portp=%x)\n", (int) portp);
 #endif
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	ipr = stl_sc26198getreg(portp, IPR);
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 
 	sigs = 0;
 	sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD;
@@ -4558,13 +4526,12 @@
 	else if (rx > 0)
 		ccr |= CR_RXENABLE;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_sc26198setreg(portp, SCCR, ccr);
 	BRDDISABLE(portp->brdnr);
 	portp->crenable = ccr;
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4593,15 +4560,14 @@
 	else if (rx > 0)
 		imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_sc26198setreg(portp, IMR, imr);
 	BRDDISABLE(portp->brdnr);
 	portp->imr = imr;
 	if (tx > 0)
 		set_bit(ASYI_TXBUSY, &portp->istate);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4618,13 +4584,12 @@
 	printk("stl_sc26198disableintrs(portp=%x)\n", (int) portp);
 #endif
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	portp->imr = 0;
 	stl_sc26198setreg(portp, IMR, 0);
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4637,8 +4602,7 @@
 	printk("stl_sc26198sendbreak(portp=%x,len=%d)\n", (int) portp, len);
 #endif
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	if (len == 1) {
 		stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK);
@@ -4647,7 +4611,7 @@
 		stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK);
 	}
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4672,8 +4636,7 @@
 	if (tty == (struct tty_struct *) NULL)
 		return;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 
 	if (state) {
@@ -4719,7 +4682,7 @@
 	}
 
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4744,8 +4707,7 @@
 	if (tty == (struct tty_struct *) NULL)
 		return;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	if (state) {
 		mr0 = stl_sc26198getreg(portp, MR0);
@@ -4765,7 +4727,7 @@
 		stl_sc26198setreg(portp, MR0, mr0);
 	}
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4781,14 +4743,13 @@
 	if (portp == (stlport_t *) NULL)
 		return;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	stl_sc26198setreg(portp, SCCR, CR_TXRESET);
 	stl_sc26198setreg(portp, SCCR, portp->crenable);
 	BRDDISABLE(portp->brdnr);
 	portp->tx.tail = portp->tx.head;
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 }
 
 /*****************************************************************************/
@@ -4815,12 +4776,11 @@
 	if (test_bit(ASYI_TXBUSY, &portp->istate))
 		return 1;
 
-	save_flags(flags);
-	cli();
+	spin_lock_irqsave(&brd_lock, flags);
 	BRDENABLE(portp->brdnr, portp->pagenr);
 	sr = stl_sc26198getreg(portp, SR);
 	BRDDISABLE(portp->brdnr);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&brd_lock, flags);
 
 	return (sr & SR_TXEMPTY) ? 0 : 1;
 }
@@ -4877,6 +4837,8 @@
 {
 	stlport_t	*portp;
 	unsigned int	iack;
+	
+	spin_lock(&brd_lock);
 
 /* 
  *	Work around bug in sc26198 chip... Cannot have A6 address
@@ -4893,6 +4855,8 @@
 		stl_sc26198txisr(portp);
 	else
 		stl_sc26198otherisr(portp, iack);
+		
+	spin_unlock(&brd_lock);
 }
 
 /*****************************************************************************/
#5 lore raw
In reply to Dave Jones
Quoted 5 lines
Quoted 2 lines

cli/sti should just be removed, or at least have those drivers marked BROKEN... nobody is apparently using them anyway...

Just ISDN really.

And ISDN is widespread in Germany (besides 56k and DSL(PPPOE)).

Jan Engelhardt

#6 lore raw
Quoted 7 lines · Jan Engelhardt
Quoted 5 lines
Quoted 2 lines

cli/sti should just be removed, or at least have those drivers marked BROKEN... nobody is apparently using them anyway...

Just ISDN really.

And ISDN is widespread in Germany (besides 56k and DSL(PPPOE)).

so it really should be fixed ;-)

#7 lore raw
In reply to Jan Engelhardt

Ar Maw, 2006-06-27 am 16:27 +0200, ysgrifennodd Jan Engelhardt:

Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

cli/sti should just be removed, or at least have those drivers marked BROKEN... nobody is apparently using them anyway...

Just ISDN really.

And ISDN is widespread in Germany (besides 56k and DSL(PPPOE)).

Then there should be lots of Germans eager to fix it when it gets dealt with.

Alan

#8 lore raw
Quoted 10 lines
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

cli/sti should just be removed, or at least have those drivers marked BROKEN... nobody is apparently using them anyway...

Just ISDN really.

And ISDN is widespread in Germany (besides 56k and DSL(PPPOE)).

Then there should be lots of Germans eager to fix it when it gets dealt with.

/* Heh, heh */

So what do I need to replace cli/sti with?

Oh btw:
(linux-2.6.17)
21:05 shanghai:../drivers/isdn > grep cli'()' -lr . ./hardware/avm/t1isa.c
./hysdn/boardergo.c
./hysdn/hysdn_proclog.c ./hysdn/hysdn_sched.c
./isdnloop/isdnloop.c

There does not really seem to be a lot of places (yes, isdnloop is full of it) to change. Especially HISAX has no cli/stis anymore as it seems, which, among AVM stuff, is commonly in use. I am running this one:
00:0a.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface (PCI, CONFIG_HISAX_NETJET)
previously I had a Teledat 100 (ISA, CONFIG_HISAX_SEDLBAUER) but had to replace that when I got a new motherboard with no ISA slots.

Have a nice day,
Jan Engelhardt

#9 lore raw
Quoted 7 lines · Jan Engelhardt
Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

cli/sti should just be removed, or at least have those drivers marked BROKEN... nobody is apparently using them anyway...

Just ISDN really.

And ISDN is widespread in Germany (besides 56k and DSL(PPPOE)).

Quoted 7 lines
Quoted 3 lines

Then there should be lots of Germans eager to fix it when it gets dealt with.

/* Heh, heh */

So what do I need to replace cli/sti with?

proper spinlocks ;)

cli/sti assumed to disable interrupts on all processors, and so when an old driver uses cli/sti it's sort of a lock against any interrupt handler (yes this is locking code not data!). In general you need to find out what data the author wanted to protect, and just create proper locking for that data.

yes this is not a mechanical transformation.. if it was it would have been done already :)