typo fixes: bandwith -> bandwidth
Subsystems (3)
PATCH 1/1 typo fixes: bandwith -> bandwidth
Signed-off-by Adrian Bunk <[email protected]>
arch/cris/arch-v32/kernel/arbiter.c | 8 ++++---- arch/cris/arch-v32/kernel/dma.c | 4 ++-- drivers/media/common/saa7146_hlp.c | 2 +- drivers/media/dvb/frontends/lgdt330x.c | 2 +- drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c | 2 +- drivers/net/skfp/h/sba.h | 2 +- drivers/video/sis/init301.c | 4 ++-- include/asm-cris/arch-v32/arbiter.h | 4 ++-- 8 files changed, 14 insertions(+), 14 deletions(-)
arch/cris/arch-v32/kernel/arbiter.c renamed from arch/cris/arch-v32/kernel/arbiter.c.old +4 -4
@@ -1,9 +1,9 @@/* -* Memory arbiter functions. Allocates bandwith through the +* Memory arbiter functions. Allocates bandwidth through the * arbiter and sets up arbiter breakpoints. * * The algorithm first assigns slots to the clients that has specified -* bandwith (e.g. ethernet) and then the remaining slots are divided +* bandwidth (e.g. ethernet) and then the remaining slots are divided * on all the active clients. * * Copyright (c) 2004, 2005 Axis Communications AB.
@@ -133,8 +133,8 @@ -int crisv32_arbiter_allocate_bandwith (int client,int region, -unsigned long bandwidth) +int crisv32_arbiter_allocate_bandwidth (int client,int region, +unsigned long bandwidth) {int i;int total_assigned =0 ;
arch/cris/arch-v32/kernel/dma.c renamed from arch/cris/arch-v32/kernel/dma.c.old +2 -2
@@ -25,8 +25,8 @@reg_config_rw_clk_ctrl clk_ctrl;reg_strmux_rw_cfg strmux_cfg; -if (crisv32_arbiter_allocate_bandwith (dmanr, - options &DMA_INT_MEM ?INT_REGION :EXT_REGION , +if (crisv32_arbiter_allocate_bandwidth (dmanr, + options &DMA_INT_MEM ?INT_REGION :EXT_REGION , bandwidth))return -ENOMEM ;
drivers/media/common/saa7146_hlp.c renamed from drivers/media/common/saa7146_hlp.c.old +1 -1
@@ -158,7 +158,7 @@ }/* the horizontal scaling increment controls the UV filter -to reduce the bandwith to improve the display quality, +to reduce the bandwidth to improve the display quality, so set it ... */ if ( xsci ==0x400 ) pfuv =0x00 ;
drivers/media/dvb/frontends/lgdt330x.c renamed from drivers/media/dvb/frontends/lgdt330x.c.old +1 -1
@@ -216,7 +216,7 @@AGC_DELAY0 ,0x07 ,AGC_DELAY2 ,0xfe ,/* Change the value of IAGCBW[15:8] -of inner AGC loop filter bandwith */ +of inner AGC loop filter bandwidth */ AGC_LOOP_BANDWIDTH0 ,0x08 , AGC_LOOP_BANDWIDTH1, 0x9a };
drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c renamed from drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c.old +1 -1
@@ -43,7 +43,7 @@ is a bit braindead (no matching channel masks or no matching filter mask), we won't support this - yet. it doesn't event support negative filters, so the best way is maybe to keep TTUSB_HWSECTIONS undef'd and just - parse TS data. USB bandwith will be a problem when having large + parse TS data. USB bandwidth will be a problem when having large datastreams, especially for dvb-net, but hey, that's not my problem. TTUSB_DISEQC, TTUSB_TONE:
drivers/net/skfp/h/sba.h renamed from drivers/net/skfp/h/sba.h.old +1 -1
@@ -13,7 +13,7 @@******************************************************************************/ /* -* Synchronous Bandwith Allocation (SBA) structs +* Synchronous Bandwidth Allocation (SBA) structs */ #ifndef _SBA_
drivers/video/sis/init301.c renamed from drivers/video/sis/init301.c.old +2 -2
@@ -8043,8 +8043,8 @@SiS_SetCH700x (SiS_Pr,0x01 ,0x28 );/* Set video bandwidth -High bandwith Luma composite video filter(S0=1) -low bandwith Luma S-video filter (S2-1=00) +High bandwidth Luma composite video filter(S0=1) +low bandwidth Luma S-video filter (S2-1=00) disable peak filter in S-video channel (S3=0) high bandwidth Chroma Filter (S5-4=11) =00110001=0x31
include/asm-cris/arch-v32/arbiter.h renamed from include/asm-cris/arch-v32/arbiter.h.old +2 -2
@@ -20,8 +20,8 @@ arbiter_all_accesses = 0xff }; -int crisv32_arbiter_allocate_bandwith (int client,int region, -unsigned long bandwidth); +int crisv32_arbiter_allocate_bandwidth (int client,int region, +unsigned long bandwidth);int crisv32_arbiter_watch (unsigned long start,unsigned long size,unsigned long clients,unsigned long accesses,watch_callback * cb);