s390: zcrypt CEX2A, CEX2C, PCICA accelerator card ap bus drivers.

diff -urpN linux-2.6/drivers/s390/crypto/zcrypt_cex2a.c linux-2.6-patched/drivers/s390/crypto/zcrypt_cex2a.c
@@ -0,0 +1,456 @@
+/*
+ *  linux/drivers/s390/crypto/zcrypt_cex2a.c
+ *
+ *  zcrypt 2.0.0
+ *
+ *  Copyright (C)  2001, 2006 IBM Corporation
+ *  Author(s): Robert Burroughs
+ *	       Eric Rossman ([email protected])
+ *
+ *  Hotplug & misc device support: Jochen Roehrig ([email protected])
+ *  Major cleanup & driver split: Martin Schwidefsky <[email protected]>
+ *				  Ralph Wuerthner <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <asm/atomic.h>
+#include <asm/uaccess.h>
+
+#include "ap_bus.h"
+#include "zcrypt_api.h"
+#include "zcrypt_error.h"
+#include "zcrypt_cex2a.h"
+
+#define CEX2A_MIN_MOD_SIZE	  1	/*    8 bits	*/
+#define CEX2A_MAX_MOD_SIZE	256	/* 2048 bits	*/
+
+#define CEX2A_SPEED_RATING	970
+
+#define CEX2A_MAX_MESSAGE_SIZE	0x390	/* sizeof(struct type50_crb2_msg)    */
+#define CEX2A_MAX_RESPONSE_SIZE 0x110	/* max outputdatalength + type80_hdr */
+
+#define CEX2A_CLEANUP_TIME	(15*HZ)
+
+static struct ap_device_id zcrypt_cex2a_ids[] = {
+	{ AP_DEVICE(AP_DEVICE_TYPE_CEX2A) },
+	{ /* end of list */ },
+};
+
+#ifndef CONFIG_ZCRYPT_MONOLITHIC
+MODULE_DEVICE_TABLE(ap, zcrypt_cex2a_ids);
+MODULE_AUTHOR("IBM Corporation");
+MODULE_DESCRIPTION("CEX2A Cryptographic Coprocessor device driver, "
+		   "Copyright 2001, 2006 IBM Corporation");
+MODULE_LICENSE("GPL");
+#endif
+
+static int zcrypt_cex2a_probe(struct ap_device *ap_dev);
+static void zcrypt_cex2a_remove(struct ap_device *ap_dev);
+static void zcrypt_cex2a_release(struct ap_device *ap_dev);
+static void zcrypt_cex2a_receive(struct ap_device *, struct ap_message *,
+				 struct ap_message *);
+
+static struct ap_driver zcrypt_cex2a_driver = {
+	.probe = zcrypt_cex2a_probe,
+	.remove = zcrypt_cex2a_remove,
+	.release = zcrypt_cex2a_release,
+	.receive = zcrypt_cex2a_receive,
+	.ids = zcrypt_cex2a_ids,
+};
+
+/**
+ * Convert a ICAMEX message to a type50 MEX message.
+ *
+ * @zdev: crypto device pointer
+ * @zreq: crypto request pointer
+ * @mex: pointer to user input data
+ *
+ * Returns 0 on success or -EFAULT.
+ */
+static int ICAMEX_msg_to_type50MEX_msg(struct zcrypt_device *zdev,
+				       struct ap_message *ap_msg,
+				       struct ica_rsa_modexpo *mex)
+{
+	unsigned char *mod, *exp, *inp;
+	int mod_len;
+
+	mod_len = mex->inputdatalength;
+
+	if (mod_len <= 128) {
+		struct type50_meb1_msg *meb1 = ap_msg->message;
+		memset(meb1, 0, sizeof(*meb1));
+		ap_msg->length = sizeof(*meb1);
+		meb1->header.msg_type_code = TYPE50_TYPE_CODE;
+		meb1->header.msg_len = sizeof(*meb1);
+		meb1->keyblock_type = TYPE50_MEB1_FMT;
+		mod = meb1->modulus + sizeof(meb1->modulus) - mod_len;
+		exp = meb1->exponent + sizeof(meb1->exponent) - mod_len;
+		inp = meb1->message + sizeof(meb1->message) - mod_len;
+	} else {
+		struct type50_meb2_msg *meb2 = ap_msg->message;
+		memset(meb2, 0, sizeof(*meb2));
+		ap_msg->length = sizeof(*meb2);
+		meb2->header.msg_type_code = TYPE50_TYPE_CODE;
+		meb2->header.msg_len = sizeof(*meb2);
+		meb2->keyblock_type = TYPE50_MEB2_FMT;
+		mod = meb2->modulus + sizeof(meb2->modulus) - mod_len;
+		exp = meb2->exponent + sizeof(meb2->exponent) - mod_len;
+		inp = meb2->message + sizeof(meb2->message) - mod_len;
+	}
+
+	if (copy_from_user(mod, mex->n_modulus, mod_len) ||
+	    copy_from_user(exp, mex->b_key, mod_len) ||
+	    copy_from_user(inp, mex->inputdata, mod_len))
+		return -EFAULT;
+	return 0;
+}
+
+/**
+ * Convert a ICACRT message to a type50 CRT message.
+ *
+ * @zdev: crypto device pointer
+ * @zreq: crypto request pointer
+ * @crt: pointer to user input data
+ *
+ * Returns 0 on success or -EFAULT.
+ */
+static int ICACRT_msg_to_type50CRT_msg(struct zcrypt_device *zdev,
+				       struct ap_message *ap_msg,
+				       struct ica_rsa_modexpo_crt *crt)
+{
+	int mod_len, short_len, long_len, long_offset;
+	unsigned char *p, *q, *dp, *dq, *u, *inp;
+
+	mod_len = crt->inputdatalength;
+	short_len = mod_len / 2;
+	long_len = mod_len / 2 + 8;
+
+	/*
+	 * CEX2A cannot handle p, dp, or U > 128 bytes.
+	 * If we have one of these, we need to do extra checking.
+	 */
+	if (long_len > 128) {
+		/*
+		 * zcrypt_rsa_crt already checked for the leading
+		 * zeroes of np_prime, bp_key and u_mult_inc.
+		 */
+		long_offset = long_len - 128;
+		long_len = 128;
+	} else
+		long_offset = 0;
+
+	/*
+	 * Instead of doing extra work for p, dp, U > 64 bytes, we'll just use
+	 * the larger message structure.
+	 */
+	if (long_len <= 64) {
+		struct type50_crb1_msg *crb1 = ap_msg->message;
+		memset(crb1, 0, sizeof(*crb1));
+		ap_msg->length = sizeof(*crb1);
+		crb1->header.msg_type_code = TYPE50_TYPE_CODE;
+		crb1->header.msg_len = sizeof(*crb1);
+		crb1->keyblock_type = TYPE50_CRB1_FMT;
+		p = crb1->p + sizeof(crb1->p) - long_len;
+		q = crb1->q + sizeof(crb1->q) - short_len;
+		dp = crb1->dp + sizeof(crb1->dp) - long_len;
+		dq = crb1->dq + sizeof(crb1->dq) - short_len;
+		u = crb1->u + sizeof(crb1->u) - long_len;
+		inp = crb1->message + sizeof(crb1->message) - mod_len;
+	} else {
+		struct type50_crb2_msg *crb2 = ap_msg->message;
+		memset(crb2, 0, sizeof(*crb2));
+		ap_msg->length = sizeof(*crb2);
+		crb2->header.msg_type_code = TYPE50_TYPE_CODE;
+		crb2->header.msg_len = sizeof(*crb2);
+		crb2->keyblock_type = TYPE50_CRB2_FMT;
+		p = crb2->p + sizeof(crb2->p) - long_len;
+		q = crb2->q + sizeof(crb2->q) - short_len;
+		dp = crb2->dp + sizeof(crb2->dp) - long_len;
+		dq = crb2->dq + sizeof(crb2->dq) - short_len;
+		u = crb2->u + sizeof(crb2->u) - long_len;
+		inp = crb2->message + sizeof(crb2->message) - mod_len;
+	}
+
+	if (copy_from_user(p, crt->np_prime + long_offset, long_len) ||
+	    copy_from_user(q, crt->nq_prime, short_len) ||
+	    copy_from_user(dp, crt->bp_key + long_offset, long_len) ||
+	    copy_from_user(dq, crt->bq_key, short_len) ||
+	    copy_from_user(u, crt->u_mult_inv + long_offset, long_len) ||
+	    copy_from_user(inp, crt->inputdata, mod_len))
+		return -EFAULT;
+
+
+	return 0;
+}
+
+/**
+ * Copy results from a type 80 reply message back to user space.
+ *
+ * @zdev: crypto device pointer
+ * @reply: reply AP message.
+ * @data: pointer to user output data
+ * @length: size of user output data
+ *
+ * Returns 0 on success or -EFAULT.
+ */
+static int convert_type80(struct zcrypt_device *zdev,
+			  struct ap_message *reply,
+			  char __user *outputdata,
+			  unsigned int outputdatalength)
+{
+	struct type80_hdr *t80h = reply->message;
+	unsigned char *data;
+
+	if (t80h->len < sizeof(*t80h) + outputdatalength) {
+		/* The result is too short, the CEX2A card may not do that.. */
+		zdev->online = 0;
+		return -EAGAIN;	/* repeat the request on a different device. */
+	}
+	BUG_ON(t80h->len > CEX2A_MAX_RESPONSE_SIZE);
+	data = reply->message + t80h->len - outputdatalength;
+	if (copy_to_user(outputdata, data, outputdatalength))
+		return -EFAULT;
+	return 0;
+}
+
+static int convert_response(struct zcrypt_device *zdev,
+			    struct ap_message *reply,
+			    char __user *outputdata,
+			    unsigned int outputdatalength)
+{
+	/* Response type byte is the second byte in the response. */
+	switch (((unsigned char *) reply->message)[1]) {
+	case TYPE82_RSP_CODE:
+	case TYPE88_RSP_CODE:
+		return convert_error(zdev, reply);
+	case TYPE80_RSP_CODE:
+		return convert_type80(zdev, reply,
+				      outputdata, outputdatalength);
+	default: /* Unknown response type, this should NEVER EVER happen */
+		PRINTK("Unrecognized Message Header: %08x%08x\n",
+		       *(unsigned int *) reply->message,
+		       *(unsigned int *) (reply->message+4));
+		zdev->online = 0;
+		return -EAGAIN;	/* repeat the request on a different device. */
+	}
+}
+
+/**
+ * This function is called from the AP bus code after a crypto request
+ * "msg" has finished with the reply message "reply".
+ * It is called from tasklet context.
+ * @ap_dev: pointer to the AP device
+ * @msg: pointer to the AP message
+ * @reply: pointer to the AP reply message
+ */
+static void zcrypt_cex2a_receive(struct ap_device *ap_dev,
+				 struct ap_message *msg,
+				 struct ap_message *reply)
+{
+	static struct error_hdr error_reply = {
+		.type = TYPE82_RSP_CODE,
+		.reply_code = REP82_ERROR_MACHINE_FAILURE,
+	};
+	struct type80_hdr *t80h = reply->message;
+	int length;
+
+	/* Copy the reply message to the request message buffer. */
+	if (IS_ERR(reply))
+		memcpy(msg->message, &error_reply, sizeof(error_reply));
+	else if (t80h->type == TYPE80_RSP_CODE) {
+		length = min(CEX2A_MAX_RESPONSE_SIZE, (int) t80h->len);
+		memcpy(msg->message, reply->message, length);
+	} else
+		memcpy(msg->message, reply->message, sizeof error_reply);
+	complete((struct completion *) msg->private);
+}
+
+static atomic_t zcrypt_step = ATOMIC_INIT(0);
+
+/**
+ * The request distributor calls this function if it picked the CEX2A
+ * device to handle a modexpo request.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ *	  CEX2A device to the request distributor
+ * @mex: pointer to the modexpo request buffer
+ */
+static long zcrypt_cex2a_modexpo(struct zcrypt_device *zdev,
+				 struct ica_rsa_modexpo *mex)
+{
+	struct ap_message ap_msg;
+	struct completion work;
+	int rc;
+
+	ap_msg.message = (void *) kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
+	if (!ap_msg.message)
+		return -ENOMEM;
+	ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+				atomic_inc_return(&zcrypt_step);
+	ap_msg.private = &work;
+	rc = ICAMEX_msg_to_type50MEX_msg(zdev, &ap_msg, mex);
+	if (rc)
+		goto out_free;
+	init_completion(&work);
+	ap_queue_message(zdev->ap_dev, &ap_msg);
+	rc = wait_for_completion_interruptible_timeout(
+				&work, CEX2A_CLEANUP_TIME);
+	if (rc > 0)
+		rc = convert_response(zdev, &ap_msg, mex->outputdata,
+				      mex->outputdatalength);
+	else {
+		/* Signal pending or message timed out. */
+		ap_cancel_message(zdev->ap_dev, &ap_msg);
+		if (rc == 0)
+			/* Message timed out. */
+			rc = -ETIME;
+	}
+out_free:
+	kfree(ap_msg.message);
+	return rc;
+}
+
+/**
+ * The request distributor calls this function if it picked the CEX2A
+ * device to handle a modexpo_crt request.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ *	  CEX2A device to the request distributor
+ * @crt: pointer to the modexpoc_crt request buffer
+ */
+static long zcrypt_cex2a_modexpo_crt(struct zcrypt_device *zdev,
+				     struct ica_rsa_modexpo_crt *crt)
+{
+	struct ap_message ap_msg;
+	struct completion work;
+	int rc;
+
+	ap_msg.message = (void *) kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
+	if (!ap_msg.message)
+		return -ENOMEM;
+	ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+				atomic_inc_return(&zcrypt_step);
+	ap_msg.private = &work;
+	rc = ICACRT_msg_to_type50CRT_msg(zdev, &ap_msg, crt);
+	if (rc)
+		goto out_free;
+	init_completion(&work);
+	ap_queue_message(zdev->ap_dev, &ap_msg);
+	rc = wait_for_completion_interruptible_timeout(
+				&work, CEX2A_CLEANUP_TIME);
+	if (rc > 0)
+		rc = convert_response(zdev, &ap_msg, crt->outputdata,
+				      crt->outputdatalength);
+	else {
+		/* Signal pending or message timed out. */
+		ap_cancel_message(zdev->ap_dev, &ap_msg);
+		if (rc == 0)
+			/* Message timed out. */
+			rc = -ETIME;
+	}
+out_free:
+	kfree(ap_msg.message);
+	return rc;
+}
+
+/**
+ * The crypto operations for a CEX2A card.
+ */
+static struct zcrypt_ops zcrypt_cex2a_ops = {
+	.rsa_modexpo = zcrypt_cex2a_modexpo,
+	.rsa_modexpo_crt = zcrypt_cex2a_modexpo_crt,
+};
+
+/**
+ * Probe function for CEX2A cards. It always accepts the AP device
+ * since the bus_match already checked the hardware type.
+ * @ap_dev: pointer to the AP device.
+ */
+static int zcrypt_cex2a_probe(struct ap_device *ap_dev)
+{
+	struct zcrypt_device *zdev;
+	int rc;
+
+	zdev = kzalloc(sizeof(*zdev), GFP_KERNEL);
+	if (!zdev)
+		return -ENOMEM;
+	spin_lock_init(&zdev->lock);
+	INIT_LIST_HEAD(&zdev->list);
+	zdev->ap_dev = ap_dev;
+	zdev->ops = &zcrypt_cex2a_ops;
+	zdev->online = 1;
+	zdev->user_space_type = ZCRYPT_CEX2A;
+	zdev->type_string = "CEX2A";
+	zdev->min_mod_size = CEX2A_MIN_MOD_SIZE;
+	zdev->max_mod_size = CEX2A_MAX_MOD_SIZE;
+	zdev->short_crt = 1;
+	zdev->speed_rating = CEX2A_SPEED_RATING;
+	zdev->reply.message = kmalloc(CEX2A_MAX_RESPONSE_SIZE, GFP_KERNEL);
+	if (!zdev->reply.message) {
+		rc = -ENOMEM;
+		goto out_free;
+	}
+	zdev->reply.length = CEX2A_MAX_RESPONSE_SIZE;
+	ap_dev->reply = &zdev->reply;
+	ap_dev->private = zdev;
+	rc = zcrypt_device_register(zdev);
+	if (rc)
+		goto out_free;
+	return 0;
+
+out_free:
+	ap_dev->private = NULL;
+	kfree(zdev);
+	return rc;
+}
+
+/**
+ * This is called to remove the extended CEX2A driver information
+ * if an AP device is removed.
+ */
+static void zcrypt_cex2a_remove(struct ap_device *ap_dev)
+{
+	struct zcrypt_device *zdev = ap_dev->private;
+
+	zcrypt_device_unregister(zdev);
+}
+
+/**
+ * This is called to release the extended CEX2A driver information
+ * if an AP device is release.
+ */
+static void zcrypt_cex2a_release(struct ap_device *ap_dev)
+{
+	struct zcrypt_device *zdev = ap_dev->private;
+
+	kfree(zdev);
+}
+
+int __init zcrypt_cex2a_init(void)
+{
+	return ap_driver_register(&zcrypt_cex2a_driver, THIS_MODULE, "cex2a");
+}
+
+void __exit zcrypt_cex2a_exit(void)
+{
+	ap_driver_unregister(&zcrypt_cex2a_driver);
+}
+
+#ifndef CONFIG_ZCRYPT_MONOLITHIC
+module_init(zcrypt_cex2a_init);
+module_exit(zcrypt_cex2a_exit);
+#endif

126 lines not on this page · raw message

133 lines not on this page · raw message

439 lines not on this page · raw message

117 lines not on this page · raw message