Skip to contentSkip to conversation

bcm43xx: init routine rewrite

PATCH New Michael Buesch 1 participant 1 message Jul 8, 2006

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 bcm43xx: init routine rewrite

Hi John,

Please apply this to wireless-2.6.

--

Rewrite of the bcm43xx initialization routines.
This fixes several issues:
* up-down-up-down-up... stale data issue
(May fix some DHCP issues)
* Fix the init vs IRQ handler race (and remove the workaround)
* Fix init for cards with multiple cores (APHY)
As softmac has no internal PHY handling (unlike dscape), this adds the file "phymode" to sysfs.
The active PHY can be selected by writing either a, b or g to this file. Current PHY can be determined by reading from it.
* Fix the controller restart code.
Controller restart can now also be triggered through echo 1 > /debug/bcm43xx/ethX/restart

drivers/net/wireless/bcm43xx/bcm43xx.h +25 -25
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx.h
===================================================================
@@ -502,6 +502,12 @@
 	 * This lock is only used by bcm43xx_phy_{un}lock()
 	 */
 	spinlock_t lock;
+
+	/* Firmware. */
+	const struct firmware *ucode;
+	const struct firmware *pcm;
+	const struct firmware *initvals0;
+	const struct firmware *initvals1;
 };
 
 
@@ -591,12 +597,14 @@
 	u8 available:1,
 	   enabled:1,
 	   initialized:1;
-	/** core_id ID number */
-	u16 id;
 	/** core_rev revision number */
 	u8 rev;
 	/** Index number for _switch_core() */
 	u8 index;
+	/** core_id ID number */
+	u16 id;
+	/** Core-specific data. */
+	void *priv;
 };
 
 /* Additional information for each 80211 core. */
@@ -645,7 +653,10 @@
 	BCM43xx_STAT_RESTARTING,	/* controller_restart() called. */
 };
 #define bcm43xx_status(bcm)		atomic_read(&(bcm)->init_status)
-#define bcm43xx_set_status(bcm, stat)	atomic_set(&(bcm)->init_status, (stat))
+#define bcm43xx_set_status(bcm, stat)	do {			\
+		atomic_set(&(bcm)->init_status, (stat));	\
+		smp_wmb();					\
+					} while (0)
 
 struct bcm43xx_private {
 	struct ieee80211_device *ieee;
@@ -706,10 +717,6 @@
 	struct bcm43xx_coreinfo core_80211[ BCM43xx_MAX_80211_CORES ];
 	/* Additional information, specific to the 80211 cores. */
 	struct bcm43xx_coreinfo_80211 core_80211_ext[ BCM43xx_MAX_80211_CORES ];
-	/* Index of the current 80211 core. If current_core is not
-	 * an 80211 core, this is -1.
-	 */
-	int current_80211_core_idx;
 	/* Number of available 80211 cores. */
 	int nr_80211_available;
 
@@ -744,12 +751,6 @@
 	struct bcm43xx_key key[54];
 	u8 default_key_idx;
 
-	/* Firmware. */
-	const struct firmware *ucode;
-	const struct firmware *pcm;
-	const struct firmware *initvals0;
-	const struct firmware *initvals1;
-
 	/* Debugging stuff follows. */
 #ifdef CONFIG_BCM43XX_DEBUG
 	struct bcm43xx_dfsentry *dfsentry;
@@ -857,34 +858,33 @@
  * any of these functions.
  */
 static inline
+struct bcm43xx_coreinfo_80211 *
+bcm43xx_current_80211_priv(struct bcm43xx_private *bcm)
+{
+	assert(bcm->current_core->id == BCM43xx_COREID_80211);
+	return bcm->current_core->priv;
+}
+static inline
 struct bcm43xx_pio * bcm43xx_current_pio(struct bcm43xx_private *bcm)
 {
 	assert(bcm43xx_using_pio(bcm));
-	assert(bcm->current_80211_core_idx >= 0);
-	assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
-	return &(bcm->core_80211_ext[bcm->current_80211_core_idx].pio);
+	return &(bcm43xx_current_80211_priv(bcm)->pio);
 }
 static inline
 struct bcm43xx_dma * bcm43xx_current_dma(struct bcm43xx_private *bcm)
 {
 	assert(!bcm43xx_using_pio(bcm));
-	assert(bcm->current_80211_core_idx >= 0);
-	assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
-	return &(bcm->core_80211_ext[bcm->current_80211_core_idx].dma);
+	return &(bcm43xx_current_80211_priv(bcm)->dma);
 }
 static inline
 struct bcm43xx_phyinfo * bcm43xx_current_phy(struct bcm43xx_private *bcm)
 {
-	assert(bcm->current_80211_core_idx >= 0);
-	assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
-	return &(bcm->core_80211_ext[bcm->current_80211_core_idx].phy);
+	return &(bcm43xx_current_80211_priv(bcm)->phy);
 }
 static inline
 struct bcm43xx_radioinfo * bcm43xx_current_radio(struct bcm43xx_private *bcm)
 {
-	assert(bcm->current_80211_core_idx >= 0);
-	assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
-	return &(bcm->core_80211_ext[bcm->current_80211_core_idx].radio);
+	return &(bcm43xx_current_80211_priv(bcm)->radio);
 }
 
 
drivers/net/wireless/bcm43xx/bcm43xx_main.c +368 -265

992 lines not on this page · raw message

drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c +44 -0

68 lines not on this page · raw message

drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h +1 -0
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
===================================================================
@@ -20,6 +20,7 @@
 	struct dentry *dentry_spromdump;
 	struct dentry *dentry_tsf;
 	struct dentry *dentry_txstat;
+	struct dentry *dentry_restart;
 
 	struct bcm43xx_private *bcm;
 
drivers/net/wireless/bcm43xx/bcm43xx_main.h +3 -0
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.h
===================================================================
@@ -133,6 +133,9 @@
 
 int bcm43xx_switch_core(struct bcm43xx_private *bcm, struct bcm43xx_coreinfo *new_core);
 
+int bcm43xx_select_wireless_core(struct bcm43xx_private *bcm,
+				 int phytype);
+
 void bcm43xx_wireless_core_reset(struct bcm43xx_private *bcm, int connect_phy);
 
 void bcm43xx_mac_suspend(struct bcm43xx_private *bcm);
drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c +70 -0

91 lines not on this page · raw message

Signature · 1 line
Greetings Michael.