Skip to contentSkip to conversation

patch for timer.c

DISCUSSION Uwe Bugla 3 participants 4 messages Jul 11, 2006 – Jul 12, 2006

lore
Share & tools
lore

Uwe Bugla

author
#0 lore raw

Hi everybody,
a thousand thanks for Roman's excellent work. which I tested as implementation in 2.6.18-rc1-mm1.
I can use again „vga=791“ as kernel parameter, I do not suffer any keyboard errors anymore at boot prompt, and the kernel boots very quickly. Fantastic!

BUT: This is a „Pentium-4-only“ solution. On my file server, which is a Pentium 3 machine, the kernel stops booting and hangs the machine, no matter if I use framebuffer console with „vga=791“ or not. Would you please try to find a fix for every architecture at any speed?

Regards

Uwe

Signature · 2 lines
"Feel free" – 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail
#1 lore raw
Quoted 3 lines · Uwe Bugla

BUT: This is a Pentium-4-only solution. On my file server, which is a Pentium 3 machine, the kernel stops booting and hangs the machine, no matter if I use framebuffer console with vga=791 or not.

Odd.. there wasn't anything P4-specific in that patch..

Quoted 1 line

Would you please try to find a fix for every architecture at any speed?

Are you *positive* that your Pentium3 box is hanging up for the same reason? It could be it's something else entirely. What point does it hang at, and does sysrq-T tell you anything useful?

#2 lore raw
In reply to Uwe Bugla

Hi,

Quoted 2 lines · Uwe Bugla

BUT: This is a „Pentium-4-only“ solution. On my file server, which is a Pentium 3 machine, the kernel stops booting and hangs the machine, no matter if I use framebuffer console with „vga=791“ or not. Would you please try to find a fix for every architecture at any speed?

Where does it hang? Could you also check with SysRq+P or Alt+ScrollLock where it hangs?

bye, Roman

author
#3 lore raw

-------- Original-Nachricht --------
Datum: Tue, 11 Jul 2006 18:32:02 +0200 (CEST)
Von: Roman Zippel <[email protected]>
An: Uwe Bugla <[email protected]>
Betreff: Re: patch for timer.c

Quoted 5 lines

Hi,

Quoted 1 line · Uwe Bugla

BUT: This is a „Pentium-4-only“ solution. On my file server, which

Quoted 8 lines

is a Pentium 3 machine, the kernel stops booting and hangs the machine, no matter if I use framebuffer console with „vga=791“ or not.

Quoted 1 line

Would you please try to find a fix for every architecture at any speed?

Where does it hang? Could you also check with SysRq+P or Alt+ScrollLock where it hangs?

bye, Roman

Hi Roman,
I have been practising Linux for more than a decade now.

I am working with standard configurations.

As standard configurations for mm-kernels differ from mainline kernels, I often have to disable 1 or even 2 modules. In this case (jumping from 2.6.17.4 to 2.6.18-rc1-mm1) I had to disable „Sony Laptop Extras.“

The patch for timer.c has been proven to be responsible for boot errors, unbootable machines and keyboard mismatches in kernel 2.6.17-mm plus 2.6.18-rc1.

As outline attachments I add two standard configs, one for a P 4 machine which is working fine, one for a P 3 machine which hangs up the machine during the boot process. If you still find out that the error is mine I declare you king. But the indices offer enough pressure that this issue is definitely one closely connected to that patch for timer.c.

I do not get any boot prompt.
It stops somewhere at the USB initialization I guess.
But I will have a closer look on this and give you another feedback in about two hours.

Regards

Uwe

Signature · 2 lines
Echte DSL-Flatrate dauerhaft für 0,- Euro*!
"Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl