2.6.18-rc1-mm1 NULL pointer dereference
2.6.18-rc1-mm1 dereferences a NULL pointer while setting up the DVB-T card and mentions sysfs.
Normally (2.6.17) it would go on loading bt878, dvb_core and a couple of frontents:
mt352 (the one I need), nxt6000, dvb_pll, sp887x, dst_ca, dst, cx24110, or51211, lgdt330x.
I applied this patch to get it to compile on the Athlon64:
arch/x86_64/kernel/vsyscall.c +2 -1
@@ -253,13 +253,14 @@ void __cpuinit vsyscall_set_cpu(int cpu)#ifdef CONFIG_NUMA node = cpu_to_node[cpu];#endif +#ifdef CONFIG_SMP if (cpu_has (&cpu_data[cpu],X86_FEATURE_RDTSCP )) {/* the notifier is unfortunately not executed on the target CPU */ void *info = (void *)((node <<12 ) | cpu);smp_call_function_single (cpu, write_rdtscp_cb, info,0 ,1 ); } - +#endif /* Store cpu number in limit so that it can be loaded quickly in user space in vgetcpu. 12 bits for the CPU and 8 bits for the node. */
from
http://marc.theaimsgroup.com/?l=linux-kernel&m=115249660716416&w=4
and this to make Debians make-kpkg happy:
Makefile +15 -3
@@ -859,6 +859,7 @@ # needs to be updated, so this check is forced on all builds uts_len := 64 + define filechk_utsrelease.h if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
@@ -867,10 +868,21 @@ (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";) endef +# define filechk_version.h +# (echo \#define LINUX_VERSION_CODE $(shell \ +# expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ +# echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) +# endef + define filechk_version.h - (echo \#define LINUX_VERSION_CODE $(shell \ - expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ - echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) + if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ + echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ + exit 1; \ + fi; \ + (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \ + echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \ + echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \ + ) endef include/linux/version.h: $(srctree)/Makefile FORCE
--
Cheers,
Arne
Bootdata ok (command line is root=/dev/sda1 ro console=ttyS1,9600e7r)
Linux version 2.6.18-rc1-mm1 (root@phoenix) (gcc version 4.1.2 20060613 (prerelease) (Debian 4.1.1-5)) #1 PREEMPT Tue Jul 11 19:10:54 CEST 2006 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
Built 1 zonelists. Total pages: 256991
Kernel command line: root=/dev/sda1 ro console=ttyS1,9600e7r
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.time.c: Detected 1802.318 MHz processor.
Console: colour VGA+ 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096
memory used by lock dependency info: 1120 kB
per task-struct memory footprint: 1680 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ d0000000 size 256 MB
Memory: 1025976k/1048256k available (1867k kernel code, 21584k reserved, 955k data, 192k init) Calibrating delay using timer specific routine.. 3607.87 BogoMIPS (lpj=1803936)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02
ACPI: Core revision 20060623
Using local APIC timer interrupts.
result 12516106
Detected 12.516 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: enabled onboard AC97/MC97 devices
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14<7>Losing some ticks... checking if CPU frequency changed.
15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 256M @ 0xd0000000
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: fbd00000-fbffffff
PREFETCH window: e8000000-faffffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 32768 (order: 9, 2359296 bytes)
TCP bind hash table entries: 16384 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 32768 bind 16384)
TCP reno registered
Initializing Cryptographic API
io scheduler noop registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.25 MHz
radeonfb: PLL min 20000 max 40000
radeonfb: Monitor 1 type DFP found
radeonfb: EDID probed
radeonfb: Monitor 2 type CRT found
radeonfb: EDID probed
Console: switching to colour frame buffer device 240x75
radeonfb (0000:01:00.0): ATI Radeon Ya
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.1 20051102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
PCI: VIA IRQ fixup for 0000:00:0f.0, from 10 to 4sata_via 0000:00:0f.0: routed to hard irq line 4
ata1: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB000 irq 20
ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xB402 bmdma 0xB008 irq 20
scsi0 : sata_via
ata1: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0xC407
scsi1 : sata_via
ata2: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0xB807
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 4
ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
scsi2 : pata_via
ata3.00: ATA-7, max UDMA/100, 312581808 sectors: LBA48
ata3.00: ata3: dev 0 multi count 16
ata3.01: ATAPI, max UDMA/33
ata3.00: configured for UDMA/100
ata3.01: configured for UDMA/33
Vendor: ATA Model: SAMSUNG SP1614N Rev: TM10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: X004 Type: CD-ROM ANSI SCSI revision: 05
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15 scsi3 : pata_via
ata4.00: ATAPI, max UDMA/33
ata4.01: ATAPI, max UDMA/33
ata4.00: configured for UDMA/33
ata4.01: configured for UDMA/33
Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 05 Vendor: HL-DT-ST Model: DVDRAM GSA-4163B Rev: A103 Type: CD-ROM ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 2:0:0:0: Attached scsi disk sda
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
EDAC MC: Ver: 2.0.1 Jul 11 2006
TCP bic registered
NET: Registered protocol family 1
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 192k freed
argc == 4
input: AT Translated Set 2 keyboard as /class/input/input0
argv[0]: "/init"
argv[1]: "root=/dev/sda1"
argv[2]: "ro"
argv[3]: "console=ttyS1,9600e7r"
Running ipconfig
kinit: do_mounts
kinit: try_name sda,1 = sda1(8,1)
kinit: name_to_dev_t(/dev/sda1) = sda1(8,1)
kinit: root_dev = sda1(8,1)
kinit: /dev/root appears to be a ext2 filesystem
kinit: trying to mount /dev/root on /root with type ext2
kinit: Mounted root (ext2 filesystem) readonly.
Checking for init: /sbin/init
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevdudevd[359]: udev_rules_init: could not read '/etc/udev/rules.d/025_libsane.rules': No such file or directory .
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...input: PC Speaker as /class/input/input1
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse as /class/input/input2
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: VIA IRQ fixup for 0000:00:07.0, from 11 to 0
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fb700000-fb7007ff] Max Packet=[2048] IR/IT contexts=[4/8]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21ehci_hcd 0000:00:10.4: EHCI Host Controllerehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbc00000ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18-rc1-mm1 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
8139too Fast Ethernet driver 0.9.27
Linux video capture interface: v2.00
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xffffc20000032000, 00:30:84:0a:47:6f, IRQ 18
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
sk98lin: Asus mainboard with buggy VPD? Correcting data.
eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 5uhci_hcd 0000:00:10.0: UHCI Host Controlleruhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c800
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18-rc1-mm1 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 5uhci_hcd 0000:00:10.1: UHCI Host Controlleruhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18-rc1-mm1 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 5uhci_hcd 0000:00:10.2: UHCI Host Controlleruhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18-rc1-mm1 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
usb usb4: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sr2: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 5uhci_hcd 0000:00:10.3: UHCI Host Controlleruhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d800
usb usb5: new device found, idVendor=0000, idProduct=0000
usb 3-2: new device found, idVendor=04f9, idProduct=0002
usb 3-2: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-2: configuration #1 chosen from 1 choice
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.18-rc1-mm1 uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 16, latency: 64, mmio: 0xe7e00000
bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
bttv0: using tuner=4
bttv0: registered device video0
Unable to handle kernel NULL pointer dereference at 00000000000000d9 RIP: [<ffffffff801cb377>] sysfs_add_file+0x20/0x88 PGD 3ee37067 PUD 3edec067 PMD 0 Oops: 0000 [1] PREEMPT last sysfs file: /devices/pci0000:00/0000:00:10.4/usb1/idVendor CPU 0 Modules linked in: tuner snd_via82xx snd_ice17xx_ak4xxx snd_via82xx_modem snd_ak4xxx_adda snd_cs8427 snd_ac97_codec snd_ac97_bus snd_i2c snd_mpu401_uart snd_pcm snd_timer bttv video_buf firmware_class snd_rawmidi snd_seq_device ir_common uhci_hcd sr_mod sk98lin compat_ioctl32 btcx_risc tveeprom videodev v4l2_common snd_page_alloc 8139too mii ehci_hcd usbcore snd soundcore ohci1394 ieee1394 cdrom psmouse k8_edac pcspkr Pid: 545, comm: modprobe Not tainted 2.6.18-rc1-mm1 #1 RIP: 0010:[<ffffffff801cb377>] [<ffffffff801cb377>] sysfs_add_file+0x20/0x88 RSP: 0018:ffff81003ee3fd48 EFLAGS: 00010296 RAX: 00000000ffffff00 RBX: ffffffff881106a0 RCX: ffff81003fde37f0 RDX: 0000000000000004 RSI: ffffffff88107d20 RDI: 0000000000000001 RBP: ffff81003ee3fd78 R08: 0000000000008040 R09: 0000000000000000 R10: ffffffff8015c243 R11: ffffffff8015c243 R12: ffffffff88107d20 R13: 0000000000000001 R14: 00000000ffffffef R15: 0000000000000000 FS: 00002ad53d5b96d0(0000) GS:ffffffff80628000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000000d9 CR3: 000000003ebd2000 CR4: 00000000000006a0 Process modprobe (pid: 545, threadinfo ffff81003ee3e000, task ffff81003fde30c0) Stack: 000000043ee3fd58 ffffffff881106a0 0000000000000000 ffff81003ff78000 ffffffff88110e68 0000000000000000 ffff81003ee3fd88 ffffffff801cb414 ffff81003ee3fd98 ffffffff80265b91 ffff81003ee3fdd8 ffffffff880f2c90 Call Trace: [<ffffffff801cb414>] sysfs_create_file+0x35/0x37 [<ffffffff80265b91>] class_device_create_file+0x17/0x19 [<ffffffff880f2c90>] :bttv:bttv_probe+0x5c2/0x7a1 [<ffffffff801fd9b8>] pci_device_probe+0x4c/0x74 [<ffffffff8026501b>] driver_probe_device+0x5c/0xb7 [<ffffffff802650e9>] __driver_attach+0x0/0x98 [<ffffffff80265138>] __driver_attach+0x4f/0x98 [<ffffffff80264a34>] bus_for_each_dev+0x49/0x7a [<ffffffff80264f45>] driver_attach+0x1c/0x1e [<ffffffff80264648>] bus_add_driver+0x89/0x138 [<ffffffff80265391>] driver_register+0x8f/0x93 [<ffffffff801fdb96>] __pci_register_driver+0x63/0x86 [<ffffffff880f1ac8>] :bttv:bttv_init_module+0xb3/0xb5 [<ffffffff801909aa>] sys_init_module+0xb0/0x203 [<ffffffff8015854e>] system_call+0x7e/0x83 Code: 4c 8b bf d8 00 00 00 48 8b 7f 50 8b 5e 10 48 81 c7 00 01 00 RIP [<ffffffff801cb377>] sysfs_add_file+0x20/0x88 RSP <ffff81003ee3fd48>
CR2: 00000000000000d9
udevd-event[535]: run_program: '/sbin/modprobe' abnormal exit
Quoted 26 lines · On Wed, 12 Jul 2006 21:08:50 +0200 Arne Ahrend <[email protected]> wrote:
2.6.18-rc1-mm1 dereferences a NULL pointer while setting up the DVB-T card and mentions sysfs.
Normally (2.6.17) it would go on loading bt878,
dvb_coreand a couple of frontents:
mt352 (the one I need), nxt6000,dvb_pll, sp887x,dst_ca, dst, cx24110, or51211, lgdt330x.I applied this patch to get it to compile on the Athlon64:
arch/x86_64/kernel/vsyscall.c +2
-1@@ -253,13 +253,14 @@ void __cpuinit vsyscall_set_cpu(int cpu)#ifdef CONFIG_NUMA node = cpu_to_node[cpu];#endif +#ifdef CONFIG_SMP if (cpu_has (&cpu_data[cpu],X86_FEATURE_RDTSCP )) {/* the notifier is unfortunately not executed on the target CPU */ void *info = (void *)((node <<12 ) | cpu);smp_call_function_single (cpu, write_rdtscp_cb, info,0 ,1 ); } - +#endif /* Store cpu number in limit so that it can be loaded quickly in user space in vgetcpu. 12 bits for the CPU and 8 bits for the node. */
Quoted 4 lines
from
http://marc.theaimsgroup.com/?l=linux-kernel&m=115249660716416&w=4
Hopefully Andi will have a new version uploaded when I do -mm2.
Quoted 27 lines
and this to make Debians make-kpkg happy:
Makefile +8
-3@@ -859,6 +859,7 @@ # needs to be updated, so this check is forced on all builds uts_len := 64 + define filechk_utsrelease.h if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \@@ -867,10 +868,21 @@ (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";) endef +# define filechk_version.h +# (echo \#define LINUX_VERSION_CODE $(shell \ +# expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ +# echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) +# endef + define filechk_version.h - (echo \#define LINUX_VERSION_CODE $(shell \ - expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ - echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) + if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
Makefile line 888
Quoted 10 lines
Makefile +7
-0+ echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ + exit 1; \ + fi; \ + (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \ + echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \ + echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \ + ) endef include/linux/version.h: $(srctree)/Makefile FORCE
Thanks, I'll forward this to Sam.
Quoted 46 lines
bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
bttv0: using tuner=4
bttv0: registered device video0Unable to handle kernel NULL pointer dereference at 00000000000000d9 RIP: [<ffffffff801cb377>] sysfs_add_file+0x20/0x88 PGD 3ee37067 PUD 3edec067 PMD 0 Oops: 0000 [1] PREEMPT last sysfs file: /devices/pci0000:00/0000:00:10.4/usb1/idVendor CPU 0 Modules linked in: tuner snd_via82xx snd_ice17xx_ak4xxx snd_via82xx_modem snd_ak4xxx_adda snd_cs8427 snd_ac97_codec snd_ac97_bus snd_i2c snd_mpu401_uart snd_pcm snd_timer bttv video_buf firmware_class snd_rawmidi snd_seq_device ir_common uhci_hcd sr_mod sk98lin compat_ioctl32 btcx_risc tveeprom videodev v4l2_common snd_page_alloc 8139too mii ehci_hcd usbcore snd soundcore ohci1394 ieee1394 cdrom psmouse k8_edac pcspkr Pid: 545, comm: modprobe Not tainted 2.6.18-rc1-mm1 #1 RIP: 0010:[<ffffffff801cb377>] [<ffffffff801cb377>] sysfs_add_file+0x20/0x88 RSP: 0018:ffff81003ee3fd48 EFLAGS: 00010296 RAX: 00000000ffffff00 RBX: ffffffff881106a0 RCX: ffff81003fde37f0 RDX: 0000000000000004 RSI: ffffffff88107d20 RDI: 0000000000000001 RBP: ffff81003ee3fd78 R08: 0000000000008040 R09: 0000000000000000 R10: ffffffff8015c243 R11: ffffffff8015c243 R12: ffffffff88107d20 R13: 0000000000000001 R14: 00000000ffffffef R15: 0000000000000000 FS: 00002ad53d5b96d0(0000) GS:ffffffff80628000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000000d9 CR3: 000000003ebd2000 CR4: 00000000000006a0 Process modprobe (pid: 545, threadinfo ffff81003ee3e000, task ffff81003fde30c0) Stack: 000000043ee3fd58 ffffffff881106a0 0000000000000000 ffff81003ff78000 ffffffff88110e68 0000000000000000 ffff81003ee3fd88 ffffffff801cb414 ffff81003ee3fd98 ffffffff80265b91 ffff81003ee3fdd8 ffffffff880f2c90 Call Trace: [<ffffffff801cb414>] sysfs_create_file+0x35/0x37 [<ffffffff80265b91>] class_device_create_file+0x17/0x19 [<ffffffff880f2c90>] :bttv:bttv_probe+0x5c2/0x7a1 [<ffffffff801fd9b8>] pci_device_probe+0x4c/0x74 [<ffffffff8026501b>] driver_probe_device+0x5c/0xb7 [<ffffffff802650e9>] __driver_attach+0x0/0x98 [<ffffffff80265138>] __driver_attach+0x4f/0x98 [<ffffffff80264a34>] bus_for_each_dev+0x49/0x7a [<ffffffff80264f45>] driver_attach+0x1c/0x1e [<ffffffff80264648>] bus_add_driver+0x89/0x138 [<ffffffff80265391>] driver_register+0x8f/0x93 [<ffffffff801fdb96>] __pci_register_driver+0x63/0x86 [<ffffffff880f1ac8>] :bttv:bttv_init_module+0xb3/0xb5 [<ffffffff801909aa>] sys_init_module+0xb0/0x203 [<ffffffff8015854e>] system_call+0x7e/0x83 Code: 4c 8b bf d8 00 00 00 48 8b 7f 50 8b 5e 10 48 81 c7 00 01 00 RIP [<ffffffff801cb377>] sysfs_add_file+0x20/0x88 RSP <ffff81003ee3fd48>
Quoted 1 line
CR2:
00000000000000d9
Yours is the third report of this. Mauro is on vacation, it's not known to be a v4l bug and nobody knows what's causing it. Not a happy story.