PATCH 2.6.18-rc1 SYM2 claim only "Storage" class
Willy,
The follow patch fixes a problem for Matt Taggart.
The Compaq system he had (dl380?) has a SmartArray device that exposes the 53c1510 device in both RAID and "normal" modes. The difference is in RAID mode, the smart array driver (IIRC) should claim the device instead of sym2 driver. Patch below prevents sym2 from claiming the device when the RAID "daughter board" is attached.
thanks,
grant
ps. I may have submitted this before but I didn't see it in -rc1
Signed-off-by Grant Grundler <[email protected]>
drivers/scsi/sym53c8xx_2/sym_glue.c +1 -1
@@ -2083,7 +2083,7 @@ static struct pci_device_id sym2_id_tabl {PCI_VENDOR_ID_LSI_LOGIC ,PCI_DEVICE_ID_NCR_53C860 , PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8, 0xffff00, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895,