Problems with sky2 driver.
Subsystems (2)
I've been having trouble with the sky2 driver. It appears to work
most of the time, but it will quite often wedge during transfers. The 2.6.17.* kernels actually seem worse than 2.6.16.19, but none of them work perfectly.
What typically happens is that after working perfectly for a while,
existing net connections hang, and subsequent net connections don't seem to start at all. firefox gets stuck with a bunch of half-loaded pages, for instance, and I've watched an scp of a large file to a colleague's machine stall and remain stalled.
Once the machine is behaving this way, a reboot is the only way I
have found of recovering it.
We have two identical machines here that are both behaving this
way, so I'm assuming it's not a hardware problem per se. The machines are Intel Pentium D 940 (3GHz) processors. They have ASUS P5LD2 motherboards, with builtin Marvell PCIe 88E8053 gigabit ethernet controllers.
I'm not running any binary modules; it's an untainted kernel. I'm
running a Gentoo system, but I'm using the vanilla-sources kernel (ie:
a pure kernel.org release, not the Gentoo-specific patched version).
What can I do to help solve this?
Todd.
--
Todd Showalter,
Silverbirch Studios.
Quoted 10 lines · Todd Showalter
I've been having trouble with the sky2 driver. It appears to work
most of the time, but it will quite often wedge during transfers. The 2.6.17.* kernels actually seem worse than 2.6.16.19, but none of them work perfectly.What typically happens is that after working perfectly for a while,
existing net connections hang, and subsequent net connections don't seem to start at all. firefox gets stuck with a bunch of half-loaded pages, for instance, and I've watched an scp of a large file to a colleague's machine stall and remain stalled.
Please test with the very latest git snapshot. A critical fix was applied after 2.6.18-rc2 was released.
Quoted 14 lines
Once the machine is behaving this way, a reboot is the only way I
have found of recovering it.We have two identical machines here that are both behaving this
way, so I'm assuming it's not a hardware problem per se. The machines are Intel Pentium D 940 (3GHz) processors. They have ASUS P5LD2 motherboards, with builtin Marvell PCIe 88E8053 gigabit ethernet controllers.I'm not running any binary modules; it's an untainted kernel. I'm
running a Gentoo system, but I'm using the vanilla-sources kernel (ie:
a pure kernel.org release, not the Gentoo-specific patched version).What can I do to help solve this?
Quoted 20 lines · On Mon, 24 Jul 2006 13:38:29 -0400 Todd Showalter…
I've been having trouble with the sky2 driver. It appears to work
most of the time, but it will quite often wedge during transfers. The 2.6.17.* kernels actually seem worse than 2.6.16.19, but none of them work perfectly.What typically happens is that after working perfectly for a while,
existing net connections hang, and subsequent net connections don't seem to start at all. firefox gets stuck with a bunch of half-loaded pages, for instance, and I've watched an scp of a large file to a colleague's machine stall and remain stalled.Once the machine is behaving this way, a reboot is the only way I
have found of recovering it.We have two identical machines here that are both behaving this
way, so I'm assuming it's not a hardware problem per se. The machines are Intel Pentium D 940 (3GHz) processors. They have ASUS P5LD2 motherboards, with builtin Marvell PCIe 88E8053 gigabit ethernet controllers.
Quoted 5 lines
I'm not running any binary modules; it's an untainted kernel. I'm
running a Gentoo system, but I'm using the vanilla-sources kernel (ie:
a pure kernel.org release, not the Gentoo-specific patched version).What can I do to help solve this?
To find out where to report problems on a specific device, look in the MAINTAINERS file. I developed and maintain that driver. Also, the mailing list for network drivers is [email protected]
There is a receive problem that shows up under load, that is fixed in the latest version (2.6.18 git), the patch is queued for the stable tree as well.
drivers/net/sky2.c +2 -5
@@ -50,7 +50,7 @@#include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.4" +#define DRV_VERSION "1.5"#define PFX DRV_NAME " "/*
@@ -2204,9 +2204,6 @@int work_done =0 ;u32 status =sky2_read32 (hw,B0_Y2_SP_EISR ); -if (!~status) - goto out; -if (status &Y2_IS_HW_ERR )sky2_hw_intr (hw);
@@ -2243,7 +2240,7 @@if (sky2_more_work (hw))return 1 ; -out: +netif_rx_complete (dev0);sky2_read32 (hw,B0_Y2_SP_LISR );
A message that is not in the archive (sent off-list or not yet received): 20060724143839.56bfebdb@akemi
Quoted 10 lines · On Mon, 24 Jul 2006 14:38:39 -0400 Todd Showalter…
Quoted 3 lines · Stephen Hemminger
There is a receive problem that shows up under load, that is fixed in the latest version (2.6.18 git), the patch is queued for the stable tree as well.
I have hand-patched this in my 2.6.17.6 kernel. It seems better
(no hard wedge yet), but there are still definitely problems.
Quoted 6 lines
The most obvious place is in firefox; for example, the front page
of slashdot half-renders (all the borders, no stories) and then sits "loading" for eternity. Ditto the online package database at gentoo.org. I'm seeing similar behavior with other websites as well. It's consistant, too; I haven't been able to view the slashdot front page since booting a 2.6.17 kernel.
I suspect that probably isn't a sky2 driver problem. Does it go away if you turn of TCP window scaling:
sysctl -w net.ipv4.tcp_window_scaling=0
If so, you probably have a middlebox in your path that is not correctly handling TCP window scaling. OpenBSD seems to be particularly bad.
Quoted 9 lines
If I boot with the 2.6.16.9 kernel, I don't seem to get that
problem until the network actually hangs.Todd.
--
Todd Showalter
Silverbirch Studios
Signature · 2 lines
Stephen Hemminger <[email protected]> "And in the Packet there writ down that doome"
Quoted 7 lines · Stephen Hemminger
I suspect that probably isn't a sky2 driver problem. Does it go away if you turn of TCP window scaling:
sysctl -w net.ipv4.tcp_window_scaling=0If so, you probably have a middlebox in your path that is not correctly handling TCP window scaling. OpenBSD seems to be particularly bad.
This seems to be the case. The combination of the patch and
shutting off tcp window scaling seems to have fixed the box. Thanks!
I'll ask around locally about network structure.
Todd.
--
Todd Showalter
Silverbirch Studios