mm snapshot broken-out-2006-08-08-00-59.tar.gz uploaded
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Andrew,
Quoted 5 lines · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gzIt contains the following patches against 2.6.18-rc4:
It appears very early. 2.6.18-rc3-mm2 was fine.
DWARF2 unwinder stuck at error_code+0x39/0x40
Leftover inexact backtrace
[<c0104194>] show_stack_log_lvl+0x8c/0x97 [<c0104320>] show_registers+0x181/0x215 [<c0104576>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+ox410/0x4f3 [<c02f5271>] error_code+0x39/0x40 [<c0104194>] show_stack_log_lvl+0x8c/0x97 [<c0104320>] show_registers+0x181/0x215 [<c0104576>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f5271>] error_code+0x39/0x40 [<c047b609>] start_kernel+0x224/0x3a2 [<c0100210>] 0xc0100210 Code: 00 39 ....... EIP:[<c01040ca>] show_trace_log_lvl+0x11b/0x159 SS:ESP 0068:c0479e74
<0> Kernel panic - not syncing: Attempted to kill idle task!
http://www.stardust.webpages.pl/files/mm/2.6.18-rc4-mm1/mm-config
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 5 lines · On Tue, 8 Aug 2006 22:29:03 +0200 "Michal Piotrowski"…
Hi Andrew,
Quoted 2 lines · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded to
Quoted 7 lines
Quoted 3 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gzIt contains the following patches against 2.6.18-rc4:
It appears very early. 2.6.18-rc3-mm2 was fine.
DWARF2 unwinder stuck at
error_code+0x39/0x40
The novelty of this thing has worn off. Guys, please let's not release 2.6.18 in this state.
Quoted 15 lines
Leftover inexact backtrace
[<c0104194>] show_stack_log_lvl+0x8c/0x97 [<c0104320>] show_registers+0x181/0x215 [<c0104576>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+ox410/0x4f3 [<c02f5271>] error_code+0x39/0x40 [<c0104194>] show_stack_log_lvl+0x8c/0x97 [<c0104320>] show_registers+0x181/0x215 [<c0104576>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f5271>] error_code+0x39/0x40 [<c047b609>] start_kernel+0x224/0x3a2 [<c0100210>] 0xc0100210 Code: 00 39 ....... EIP:[<c01040ca>] show_trace_log_lvl+0x11b/0x159 SS:ESP 0068:c0479e74
Quoted 4 lines
<0> Kernel panic - not syncing: Attempted to kill idle task!
http://www.stardust.webpages.pl/files/mm/2.6.18-rc4-mm1/mm-config
So I guess the dwarf unwinder oopsed and wrecked our oops. Perhaps you'll get better info with CONFIG_UNWIND_INFO=n, CONFIG_STACK_UNWIND=n.
Now, _perhaps_ it oopsed at "[<c047b609>] start_kernel+0x224/0x3a2". You can look these things up in gdb or using addr2line, provided you have CONFIG_DEBUG_INFO=y.
Quoted 36 lines · Andrew Morton
Quoted 5 lines · On Tue, 8 Aug 2006 22:29:03 +0200 "Michal Piotrowski"…
Hi Andrew,
Quoted 2 lines · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded to
Quoted 7 lines
Quoted 3 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gzIt contains the following patches against 2.6.18-rc4:
It appears very early. 2.6.18-rc3-mm2 was fine.
DWARF2 unwinder stuck at
error_code+0x39/0x40The novelty of this thing has worn off. Guys, please let's not release 2.6.18 in this state.
Quoted 17 lines
Leftover inexact backtrace
[<c0104194>] show_stack_log_lvl+0x8c/0x97 [<c0104320>] show_registers+0x181/0x215 [<c0104576>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+ox410/0x4f3 [<c02f5271>] error_code+0x39/0x40 [<c0104194>] show_stack_log_lvl+0x8c/0x97 [<c0104320>] show_registers+0x181/0x215 [<c0104576>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f5271>] error_code+0x39/0x40 [<c047b609>] start_kernel+0x224/0x3a2 [<c0100210>] 0xc0100210 Code: 00 39 ....... EIP:[<c01040ca>] show_trace_log_lvl+0x11b/0x159 SS:ESP 0068:c0479e74<0> Kernel panic - not syncing: Attempted to kill idle task!
Quoted 7 lines
So I guess the dwarf unwinder oopsed and wrecked our oops. Perhaps you'll get better info with
CONFIG_UNWIND_INFO=n,CONFIG_STACK_UNWIND=n.Now, _perhaps_ it oopsed at "[<
c047b609>]start_kernel+0x224/0x3a2".
eghm... typo.
[<c047d609>]
Quoted 5 lines
You
can look these things up in gdb or using addr2line, provided you haveCONFIG_DEBUG_INFO=y.
(gdb) list *0xc047d6090xc047d609 is in start_kernel (/usr/src/linux-work1/init/main.c:577).
572 cpuset_init_early(); 573 mem_init(); 574 kmem_cache_init(); 575 setup_per_cpu_pageset(); 576 numa_policy_init(); 577 if (late_time_init) 578 late_time_init(); 579 calibrate_delay(); 580 pidmap_init(); 581 pgtable_cache_init();
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 8 lines · On Tue, 8 Aug 2006 23:19:09 +0200 "Michal Piotrowski"…
Quoted 5 lines
You
can look these things up in gdb or using addr2line, provided you haveCONFIG_DEBUG_INFO=y.(gdb) list *0xc047d609
0xc047d609is instart_kernel(/usr/src/linux-work1/init/main.c:577).
Quoted 10 lines
572 cpuset_init_early(); 573 mem_init(); 574 kmem_cache_init(); 575 setup_per_cpu_pageset(); 576 numa_policy_init(); 577 if (late_time_init) 578 late_time_init(); 579 calibrate_delay(); 580 pidmap_init(); 581 pgtable_cache_init();
hm.
- Try to get the full oops record, find out what the faulting address is ("unable to handle kernel paging request at virtual address xxxx") and see if that lines up with any symbol in .vmlinux.
- Might be something bad in numa_policy_init(). I assume you don't have CONFIG_NUMA=y ;)
This'll be hard to diagnose without a full oops trace.
Quoted 22 lines · Andrew Morton
Quoted 8 lines · On Tue, 8 Aug 2006 23:19:09 +0200 "Michal Piotrowski"…
Quoted 5 lines
You
can look these things up in gdb or using addr2line, provided you haveCONFIG_DEBUG_INFO=y.(gdb) list *0xc047d609
0xc047d609is instart_kernel(/usr/src/linux-work1/init/main.c:577).Quoted 10 lines
572 cpuset_init_early(); 573 mem_init(); 574 kmem_cache_init(); 575 setup_per_cpu_pageset(); 576 numa_policy_init(); 577 if (late_time_init) 578 late_time_init(); 579 calibrate_delay(); 580 pidmap_init(); 581 pgtable_cache_init();
Quoted 3 lines
hm.
- Try to get the full oops record,
BUG: unable to handle kernel paging request at virtual address 01020304 printing eip: c041b95c *pde= 00000000 Oops: 0000 [#1] 4K_STACK PREEMPT SMP last sysfs file: Modules linked in:
CPU 0
EIP: 0060: [<c041b95c>] Not tainted VLI
EFLAGS: 00010202
EIP is at kmem_cache_init+0x389/0x3f0
[..]
Call Trace: [<c0104063>] show_stack_log_lvl+0x8c/0x97 [<c010422b>] show_registers+0x181/0x215 [<c0104481>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f40a1>] error_code+0x39/0x40 [<c040b604>] start_kernel+0x21f/0x39d
[<c0100210>] 0xc0100210
[..]
EIP: [<c041b95c>] kmem_cache_init+0x389/0x3f0 SS:ESP0068:c0409fc4 <0> Kernel panic - not syncing: Attempted to kill idle task!
(gdb) list *0xc041b95c0xc041b95c is in kmem_cache_init (/usr/src/linux-work1/mm/slab.c:714).
709 lockdep_set_class(&l3->list_lock,&on_slab_l3_key);
710 alc = l3->alien;
711 if (!alc)
712 continue;
713 for_each_node(r) {
714 if (alc[r])
715 lockdep_set_class(&alc[r]->lock,
716 &on_slab_alc_key);
717 }
718 }
Quoted 3 lines
find out what the faulting address is
("unable to handle kernel paging request at virtual address xxxx") and see if that lines up with any symbol in .vmlinux.
Did you mean "list 01020304"?
Quoted 3 lines
- Might be something bad in
numa_policy_init(). I assume you don't haveCONFIG_NUMA=y;)
No, I don't.
Quoted 4 lines
This'll be hard to diagnose without a full oops trace.
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 52 lines · Michal Piotrowski
Quoted 22 lines · Andrew Morton
Quoted 8 lines · On Tue, 8 Aug 2006 23:19:09 +0200 "Michal Piotrowski"…
Quoted 5 lines
You
can look these things up in gdb or using addr2line, provided you haveCONFIG_DEBUG_INFO=y.(gdb) list *0xc047d609
0xc047d609is instart_kernel(/usr/src/linux-work1/init/main.c:577).Quoted 10 lines
572 cpuset_init_early(); 573 mem_init(); 574 kmem_cache_init(); 575 setup_per_cpu_pageset(); 576 numa_policy_init(); 577 if (late_time_init) 578 late_time_init(); 579 calibrate_delay(); 580 pidmap_init(); 581 pgtable_cache_init();Quoted 3 lines
hm.
- Try to get the full oops record,
BUG: unable to handle kernel paging request at virtual address 01020304 printing eip: c041b95c *pde= 00000000 Oops: 0000 [#1] 4K_STACK PREEMPT SMP last sysfs file: Modules linked in:CPU 0
EIP: 0060: [<c041b95c>] Not tainted VLI
EFLAGS: 00010202
EIP is atkmem_cache_init+0x389/0x3f0
[..]Call Trace: [<c0104063>] show_stack_log_lvl+0x8c/0x97 [<c010422b>] show_registers+0x181/0x215 [<c0104481>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f40a1>] error_code+0x39/0x40 [<c040b604>] start_kernel+0x21f/0x39d[<
c0100210>]0xc0100210
[..]
EIP: [<c041b95c>]kmem_cache_init+0x389/0x3f0SS:ESP0068:c0409fc4 <0> Kernel panic - not syncing: Attempted to kill idle task!
Quoted 14 lines
(gdb) list *0xc041b95c
0xc041b95cis inkmem_cache_init(/usr/src/linux-work1/mm/slab.c:714).
709 lockdep_set_class(&l3->list_lock,&on_slab_l3_key);
710 alc =l3->alien;
711 if (!alc)
712 continue;
713for_each_node(r){
714 if (alc[r])
715 lockdep_set_class(&alc[r]->lock,
716&on_slab_alc_key);
717 }
718 }
System works well without this patches slab-cache-shrinker-statistics.patch slab-fix-lockdep-warnings.patch slab-optimize-kmalloc_node-the-same-way-as-kmalloc-fix.patch slab-optimize-kmalloc_node-the-same-way-as-kmalloc.patch slab-respect-architecture-and-caller-mandated-alignment.patch
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 52 lines · On Wed, 9 Aug 2006 00:11:38 +0200 "Michal Piotrowski"…
Quoted 22 lines · Andrew Morton
Quoted 8 lines · On Tue, 8 Aug 2006 23:19:09 +0200 "Michal Piotrowski"…
Quoted 5 lines
You
can look these things up in gdb or using addr2line, provided you haveCONFIG_DEBUG_INFO=y.(gdb) list *0xc047d609
0xc047d609is instart_kernel(/usr/src/linux-work1/init/main.c:577).Quoted 10 lines
572 cpuset_init_early(); 573 mem_init(); 574 kmem_cache_init(); 575 setup_per_cpu_pageset(); 576 numa_policy_init(); 577 if (late_time_init) 578 late_time_init(); 579 calibrate_delay(); 580 pidmap_init(); 581 pgtable_cache_init();Quoted 3 lines
hm.
- Try to get the full oops record,
BUG: unable to handle kernel paging request at virtual address 01020304 printing eip: c041b95c *pde= 00000000 Oops: 0000 [#1] 4K_STACK PREEMPT SMP last sysfs file: Modules linked in:CPU 0
EIP: 0060: [<c041b95c>] Not tainted VLI
EFLAGS: 00010202
EIP is atkmem_cache_init+0x389/0x3f0
[..]Call Trace: [<c0104063>] show_stack_log_lvl+0x8c/0x97 [<c010422b>] show_registers+0x181/0x215 [<c0104481>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f40a1>] error_code+0x39/0x40 [<c040b604>] start_kernel+0x21f/0x39d[<
c0100210>]0xc0100210
[..]
EIP: [<c041b95c>]kmem_cache_init+0x389/0x3f0SS:ESP0068:c0409fc4 <0> Kernel panic - not syncing: Attempted to kill idle task!
Quoted 13 lines
(gdb) list *0xc041b95c
0xc041b95cis inkmem_cache_init(/usr/src/linux-work1/mm/slab.c:714).
709 lockdep_set_class(&l3->list_lock,&on_slab_l3_key);
710 alc =l3->alien;
711 if (!alc)
712 continue;
713for_each_node(r){
714 if (alc[r])
715 lockdep_set_class(&alc[r]->lock,
716&on_slab_alc_key);
717 }
718 }
ah-hah, thanks. The oopsing statement was added by slab-fix-lockdep-warnings.patch.
I guess we can fix this by whacking another #ifdef CONFIG_NUMA in there but I don't think that's how we want to address this.
We've been moving towards making the NUMA slab code work OK in a non-NUMA build by setting the NUMA-specific fields to NULL and simply blowing a few cycles at runtime to avoid many tens of ifdefs (it's that bad).
Here, we should have had either l3==NULL or l3->alien==NULL, but that has been violated, hence the crash.
Kiran, could you take a look please? The 0x01020304 is interesting...
Quoted 69 lines · Andrew Morton
Quoted 52 lines · On Wed, 9 Aug 2006 00:11:38 +0200 "Michal Piotrowski"…
Quoted 22 lines · Andrew Morton
Quoted 8 lines · On Tue, 8 Aug 2006 23:19:09 +0200 "Michal Piotrowski"…
Quoted 5 lines
You
can look these things up in gdb or using addr2line, provided you haveCONFIG_DEBUG_INFO=y.(gdb) list *0xc047d609
0xc047d609is instart_kernel(/usr/src/linux-work1/init/main.c:577).Quoted 10 lines
572 cpuset_init_early(); 573 mem_init(); 574 kmem_cache_init(); 575 setup_per_cpu_pageset(); 576 numa_policy_init(); 577 if (late_time_init) 578 late_time_init(); 579 calibrate_delay(); 580 pidmap_init(); 581 pgtable_cache_init();Quoted 3 lines
hm.
- Try to get the full oops record,
BUG: unable to handle kernel paging request at virtual address 01020304 printing eip: c041b95c *pde= 00000000 Oops: 0000 [#1] 4K_STACK PREEMPT SMP last sysfs file: Modules linked in:CPU 0
EIP: 0060: [<c041b95c>] Not tainted VLI
EFLAGS: 00010202
EIP is atkmem_cache_init+0x389/0x3f0
[..]Call Trace: [<c0104063>] show_stack_log_lvl+0x8c/0x97 [<c010422b>] show_registers+0x181/0x215 [<c0104481>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f40a1>] error_code+0x39/0x40 [<c040b604>] start_kernel+0x21f/0x39d[<
c0100210>]0xc0100210
[..]
EIP: [<c041b95c>]kmem_cache_init+0x389/0x3f0SS:ESP0068:c0409fc4 <0> Kernel panic - not syncing: Attempted to kill idle task!Quoted 13 lines
(gdb) list *0xc041b95c
0xc041b95cis inkmem_cache_init(/usr/src/linux-work1/mm/slab.c:714).
709 lockdep_set_class(&l3->list_lock,&on_slab_l3_key);
710 alc =l3->alien;
711 if (!alc)
712 continue;
713for_each_node(r){
714 if (alc[r])
715 lockdep_set_class(&alc[r]->lock,
716&on_slab_alc_key);
717 }
718 }
Quoted 2 lines
ah-hah, thanks. The oopsing statement was added by slab-fix-lockdep-warnings.patch.
Confirmed.
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 9 lines · Andrew Morton
On Wed, 9 Aug 2006 00:11:38 +0200
"Michal Piotrowski" <[email protected]> wrote:ah-hah, thanks. The oopsing statement was added by slab-fix-lockdep-warnings.patch.
I guess we can fix this by whacking another #ifdef
CONFIG_NUMAin there but I don't think that's how we want to address this.
Quoted 7 lines
We've been moving towards making the NUMA slab code work OK in a non-NUMA build by setting the NUMA-specific fields to NULL and simply blowing a few cycles at runtime to avoid many tens of ifdefs (it's that bad).
Here, we should have had either l3==NULL or l3->alien==NULL, but that has been violated, hence the crash.
Kiran, could you take a look please? The0x01020304is interesting...
Eeesh, because on SMP, alloc_alien_cache returns 0x01020304 instead of NULL, And it returns 0x01020304 because CPU_UP_PREPARE fails if alloc_alien_cache returns NULL. NUMA and non NUMA slab should be able to work even without alien caches, currently that doesn't seem to be the case. We are working on that. In the meanwhile, the following patch should fix the oops due to locdep annotation.
Thanks,
Kiran
Fix oops due to alien cache locdep annotation on non NUMA configurations. A plain alien != NULL won't work as l3->alien is initialized with 0x01020304ul
mm/slab.c +11 -2
@@ -674,6 +674,8 @@ static struct kmem_cache cache_cache = {#endif }; +#define BAD_ALIEN_MAGIC 0x01020304ul +#ifdef CONFIG_LOCKDEP /*
@@ -705,7 +707,14 @@ static inline void init_lock_keys(void)continue ;lockdep_set_class (&l3->list_lock, &on_slab_l3_key); alc = l3->alien; -if (!alc) +/* +* FIXME: This check for BAD_ALIEN_MAGIC +* should go away when common slab code is taught to +* work even without alien caches. +* Currently, non NUMA code returns BAD_ALIEN_MAGIC +* for alloc_alien_cache, +*/ +if (!alc || (unsigned long ) alc ==BAD_ALIEN_MAGIC )continue ;for_each_node (r) {if (alc[r])
@@ -1112,7 +1121,7 @@ static inline int cache_free_alien(strucstatic inline struct array_cache **alloc_alien_cache (int node,int limit) { -return (struct array_cache **)0x01020304ul ; +return (struct array_cache **)BAD_ALIEN_MAGIC ; }static inline void free_alien_cache (struct array_cache **ac_ptr)
Hi,
Quoted 25 lines · Ravikiran G Thirumalai
Quoted 9 lines · Andrew Morton
On Wed, 9 Aug 2006 00:11:38 +0200
"Michal Piotrowski" <[email protected]> wrote:ah-hah, thanks. The oopsing statement was added by slab-fix-lockdep-warnings.patch.
I guess we can fix this by whacking another #ifdef
CONFIG_NUMAin there but I don't think that's how we want to address this.Quoted 7 lines
We've been moving towards making the NUMA slab code work OK in a non-NUMA build by setting the NUMA-specific fields to NULL and simply blowing a few cycles at runtime to avoid many tens of ifdefs (it's that bad).
Here, we should have had either l3==NULL or l3->alien==NULL, but that has been violated, hence the crash.
Kiran, could you take a look please? The0x01020304is interesting...Eeesh, because on SMP,
alloc_alien_cachereturns0x01020304instead of NULL, And it returns0x01020304becauseCPU_UP_PREPAREfails ifalloc_alien_cachereturns NULL. NUMA and non NUMA slab should be able to work even without alien caches, currently that doesn't seem to be the case. We are working on that. In the meanwhile, the following patch should fix the oops due to locdep annotation.
Quoted 6 lines
Thanks,
KiranFix oops due to alien cache locdep annotation on non NUMA configurations. A plain alien != NULL won't work as
l3->alienis initialized with0x01020304ul
Bug fixed, thanks.
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 35 lines · Michal Piotrowski
Quoted 22 lines · Andrew Morton
Quoted 8 lines · On Tue, 8 Aug 2006 23:19:09 +0200 "Michal Piotrowski"…
Quoted 5 lines
You
can look these things up in gdb or using addr2line, provided you haveCONFIG_DEBUG_INFO=y.(gdb) list *0xc047d609
0xc047d609is instart_kernel(/usr/src/linux-work1/init/main.c:577).Quoted 10 lines
572 cpuset_init_early(); 573 mem_init(); 574 kmem_cache_init(); 575 setup_per_cpu_pageset(); 576 numa_policy_init(); 577 if (late_time_init) 578 late_time_init(); 579 calibrate_delay(); 580 pidmap_init(); 581 pgtable_cache_init();Quoted 3 lines
hm.
- Try to get the full oops record,
BUG: unable to handle kernel paging request at virtual address 01020304 printing eip: c041b95c *pde= 00000000 Oops: 0000 [#1] 4K_STACK PREEMPT SMP last sysfs file: Modules linked in:
Quoted 4 lines
CPU 0
EIP: 0060: [<c041b95c>] Not tainted VLI
EFLAGS: 00010202
EIP is atkmem_cache_init+0x389/0x3f0
Well it didn't crash in the unwinder.
Quoted 1 line
[..]
And that [..] isn't a unwinder problem, but a human operator error. Michal, you removed the valuable part of the backtrace.
-AndI
Quoted 8 lines
Call Trace: [<c0104063>] show_stack_log_lvl+0x8c/0x97 [<c010422b>] show_registers+0x181/0x215 [<c0104481>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f40a1>] error_code+0x39/0x40 [<c040b604>] start_kernel+0x21f/0x39d[<
c0100210>]0xc0100210
Quoted 14 lines · Andi Kleen
Quoted 8 lines · Michal Piotrowski
BUG: unable to handle kernel paging request at virtual address 01020304 printing eip: c041b95c *pde= 00000000 Oops: 0000 [#1] 4K_STACK PREEMPT SMP last sysfs file: Modules linked in:Quoted 4 lines
CPU 0
EIP: 0060: [<c041b95c>] Not tainted VLI
EFLAGS: 00010202
EIP is atkmem_cache_init+0x389/0x3f0
Quoted 5 lines
Well it didn't crash in the unwinder.
Quoted 1 line
[..]
And that [..] isn't a unwinder problem, but a human operator error. Michal, you removed the valuable part of the backtrace.
No, I didn't. I haven't seen that oops. I don't have a serial console, and the system hangs very early.
Quoted 3 lines
-AndI
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 10 lines · Andrew Morton
Quoted 7 lines · On Tue, 8 Aug 2006 22:29:03 +0200 "Michal Piotrowski"…
Hi Andrew,
Quoted 4 lines · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gz
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
It contains the following patches against 2.6.18-rc4:
It appears very early. 2.6.18-rc3-mm2 was fine.
DWARF2 unwinder stuck at
error_code+0x39/0x40The novelty of this thing has worn off. Guys, please let's not release 2.6.18 in this state.
The stucks are harmless (and currently expected) as long as the dwarf2 trace and the leftover trace give you a full picture and the unwinder doesn't crash (the later would be a bug that needs to be fixed before)
I have various fixed queued for the unwinder (or rather for annotations used by the unwinder), but expect them to only be merged with .19.
Quoted 3 lines
Quoted 3 lines
Leftover inexact backtrace
[<c0104194>]show_stack_log_lvl+0x8c/0x97
This might be ok.
Quoted 5 lines
Quoted 5 lines
[<c0104320>] show_registers+0x181/0x215 [<c0104576>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+ox410/0x4f3 [<c02f5271>] error_code+0x39/0x40 [<c0104194>] show_stack_log_lvl+0x8c/0x97
Quoted 8 lines
Quoted 8 lines
[<c0104320>] show_registers+0x181/0x215 [<c0104576>] die+0x1c2/0x2dd [<c0117419>] do_page_fault+0x410/0x4f3 [<c02f5271>] error_code+0x39/0x40 [<c047b609>] start_kernel+0x224/0x3a2 [<c0100210>] 0xc0100210 Code: 00 39 ....... EIP:[<c01040ca>] show_trace_log_lvl+0x11b/0x159 SS:ESP 0068:c0479e74
This might be not. Hard to tell. Can we have a complete oops please? (using netconsole or digital camera or firescope)
-andi
Quoted 4 lines · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gz
When I want to halt system I type "init 0", but it stops on
Halting system...
Synchronizing SCSI cache for disk sda
Shutdown: hda
Problem appears on 2.6.18-rc3-mm*. I guess that this is an IDE or ACPI bug. I'll revert IDE and ACPI patches. If it won't help, I'll do binary search.
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Hi,
Quoted 6 lines · Michal Piotrowski
Quoted 4 lines · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gz
Quoted 8 lines
When I want to halt system I type "init 0", but it stops on
Halting system...
Synchronizing SCSI cache for disk sda
Shutdown: hdaProblem appears on 2.6.18-rc3-mm*. I guess that this is an IDE or ACPI bug. I'll revert IDE and ACPI patches. If it won't help, I'll do binary search.
It's a git-block.patch
Jens, can you look at this?
Here is a config file
http://www.stardust.webpages.pl/files/mm/2.6.18-rc4-mm1/mm-config2
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 19 lines · Michal Piotrowski
Hi,
Quoted 7 lines · Michal Piotrowski
Quoted 3 lines · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gz
Quoted 1 line
Quoted 8 lines
When I want to halt system I type "init 0", but it stops on
Halting system...
Synchronizing SCSI cache for disk sda
Shutdown: hdaProblem appears on 2.6.18-rc3-mm*. I guess that this is an IDE or ACPI bug. I'll revert IDE and ACPI patches. If it won't help, I'll do binary search.
Quoted 6 lines
It's a git-block.patch
Jens, can you look at this?
Here is a config file
http://www.stardust.webpages.pl/files/mm/2.6.18-rc4-mm1/mm-config2
It's the already solved bug, I believe. The version referenced above still has the fixed REQ_TYPE_ATA_TASKFILE and ->end_io_data for suspend problem.
Let me know if it works or not with this applied.
drivers/ide/ide.c +2 -2
@@ -1223,7 +1223,7 @@ static int generic_ide_suspend(struct dememset (&args,0 ,sizeof (args)); rq.cmd_type =REQ_TYPE_PM_SUSPEND ; rq.special = &args; - rq.end_io_data = &rqpm; + rq.data = &rqpm; rqpm.pm_step = ide_pm_state_start_suspend;if (mesg.event ==PM_EVENT_PRETHAW ) mesg.event =PM_EVENT_FREEZE ;
@@ -1244,7 +1244,7 @@ static int generic_ide_resume(struct devmemset (&args,0 ,sizeof (args)); rq.cmd_type =REQ_TYPE_PM_RESUME ; rq.special = &args; - rq.end_io_data = &rqpm; + rq.data = &rqpm; rqpm.pm_step = ide_pm_state_start_resume; rqpm.pm_state =PM_EVENT_ON ;
drivers/ide/ide-io.c +6 -6
@@ -141,7 +141,7 @@ enum {static void ide_complete_power_step (ide_drive_t *drive,struct request *rq,u8 stat,u8 error) { -struct request_pm_state *pm = rq->end_io_data; +struct request_pm_state *pm = rq->data;if (drive->media != ide_disk)return ;
@@ -167,7 +167,7 @@ static void ide_complete_power_step(ide_static ide_startstop_t ide_start_power_step (ide_drive_t *drive,struct request *rq) { -struct request_pm_state *pm = rq->end_io_data; +struct request_pm_state *pm = rq->data;ide_task_t *args = rq->special;memset (args,0 ,sizeof (*args));
@@ -402,7 +402,7 @@ void ide_end_drive_cmd (ide_drive_t *dri args[5 ] = hwif->INB (IDE_HCYL_REG ); args[6 ] = hwif->INB (IDE_SELECT_REG ); } - }else if (rq->cmd_type &REQ_TYPE_ATA_TASKFILE ) { + }else if (rq->cmd_type ==REQ_TYPE_ATA_TASKFILE ) {ide_task_t *args = (ide_task_t *) rq->special;if (rq->errors ==0 ) rq->errors = !OK_STAT (stat,READY_STAT ,BAD_STAT );
@@ -433,7 +433,7 @@ void ide_end_drive_cmd (ide_drive_t *dri } } }else if (blk_pm_request (rq)) { -struct request_pm_state *pm = rq->end_io_data; +struct request_pm_state *pm = rq->data;#ifdef DEBUG_PM printk ("%s: complete_power_step(step: %d, stat: %x, err: %x)\n" , drive->name, rq->pm->pm_step, stat, err);
@@ -945,7 +945,7 @@ done:static void ide_check_pm_state (ide_drive_t *drive,struct request *rq) { -struct request_pm_state *pm = rq->end_io_data; +struct request_pm_state *pm = rq->data;if (blk_pm_suspend_request (rq) && pm->pm_step == ide_pm_state_start_suspend)
@@ -1030,7 +1030,7 @@ static ide_startstop_t start_request (id rq->cmd_type == REQ_TYPE_ATA_TASKFILE)return execute_drive_cmd (drive, rq); else if (blk_pm_request(rq)) { -struct request_pm_state *pm = rq->end_io_data; +struct request_pm_state *pm = rq->data;#ifdef DEBUG_PM printk ("%s: start_power_step(step: %d)\n" , drive->name, rq->pm->pm_step);
Signature · 1 line
Jens Axboe
Quoted 24 lines · Jens Axboe
Quoted 23 lines · Michal Piotrowski
Hi,
Quoted 7 lines · Michal Piotrowski
Quoted 3 lines · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gz
Quoted 1 line
Quoted 8 lines
When I want to halt system I type "init 0", but it stops on
Halting system...
Synchronizing SCSI cache for disk sda
Shutdown: hdaProblem appears on 2.6.18-rc3-mm*. I guess that this is an IDE or ACPI bug. I'll revert IDE and ACPI patches. If it won't help, I'll do binary search.
It's a git-block.patch
Jens, can you look at this?
Quoted 9 lines
Quoted 2 lines
Here is a config file
http://www.stardust.webpages.pl/files/mm/2.6.18-rc4-mm1/mm-config2It's the already solved bug, I believe. The version referenced above still has the fixed
REQ_TYPE_ATA_TASKFILEand ->end_io_data for suspend problem.Let me know if it works or not with this applied.
It works. Thanks!
Andrew, please add this patch to -mm.
Quoted 4 lines
--
Jens Axboe
Regards,
Michal
Signature · 3 lines
Michal K. K. Piotrowski LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 36 lines · Michal Piotrowski
Quoted 35 lines · Jens Axboe
Quoted 5 lines · Michal Piotrowski
Hi,
Quoted 2 lines · Michal Piotrowski
Quoted 1 line · On 08/08/06, [email protected] <[email protected]> wrote:
The mm snapshot broken-out-2006-08-08-00-59.tar.gz has been uploaded
to
Quoted 13 lines
Quoted 2 lines
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2006-08-08-00-59.tar.gz
Quoted 9 lines
Quoted 1 line
When I want to halt system I type "init 0", but it stops on
Halting system...
Synchronizing SCSI cache for disk sda
Shutdown: hdaProblem appears on 2.6.18-rc3-mm*. I guess that this is an IDE or ACPI
bug.
Quoted 1 line
Quoted 1 line
I'll revert IDE and ACPI patches. If it won't help, I'll do binary
search.
Quoted 7 lines
It's a git-block.patch
Jens, can you look at this?
Here is a config file
http://www.stardust.webpages.pl/files/mm/2.6.18-rc4-mm1/mm-config2It's the already solved bug, I believe. The version referenced above still has the fixed
REQ_TYPE_ATA_TASKFILEand ->end_io_data for suspend problem.
Quoted 6 lines
Quoted 2 lines
Let me know if it works or not with this applied.
It works. Thanks!
Andrew, please add this patch to -mm.
It should just work, when andrew pulls for 'for-akpm' branch for the next -mm. At least the included fixes are already there.
Signature · 1 line
Jens Axboe