Skip to contentSkip to conversation

7/7 AU1100 MMC support

PATCH In review Rodolfo Giometti 1 participant 2 messages Aug 9, 2006 – Aug 10, 2006

Subsystems (2)
MIPS MMC, SD and SDIO
lore
Share & tools
lore

Rodolfo Giometti

author
#0 lore raw

PATCH 1/1 7/7 AU1100 MMC support

Power Management support for AU1100 (PIO mode) added.

Signed-off-by Rodolfo Giometti <[email protected]>
Signature · 4 lines
GNU/Linux Solutions                  e-mail:    [email protected]
Linux Device Driver                             [email protected]
Embedded Systems                     		[email protected]
UNIX programming                     phone:     +39 349 2432127
drivers/mmc/au1xmmc.c +74 -2
index 61acf6b..920486d 100644
@@ -19,6 +19,10 @@
  *     Rodolfo Giometti <[email protected]>
  *     Eurotech S.p.A. <[email protected]>
 
+ *  Power Management Support for AU1100 in PIO mode by:
+ *     Rodolfo Giometti <[email protected]>
+ *     Eurotech S.p.A. <[email protected]>
+
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.

@@ -1086,11 +1090,79 @@ #endif
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static u32 sd_txport[2];
+static u32 sd_rxport[2];
+static u32 sd_config[2];
+static u32 sd_config2[2];
+static u32 sd_blksize[2];
+static u32 sd_status[2];
+static u32 sd_cmd[2];
+static u32 sd_cmdarg[2];
+static u32 sd_timeout[2];
+
+static int au1xmmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	int ret = 0;
+
+printk("GU au1xmmc_suspend %d\n", host->id);
+	if (mmc)
+		ret = mmc_suspend_host(mmc, state);
+
+	sd_txport[host->id]  = au_readl(HOST_TXPORT(host));
+	sd_rxport[host->id]  = au_readl(HOST_RXPORT(host));
+	sd_config[host->id]  = au_readl(HOST_CONFIG(host));
+	sd_config2[host->id] = au_readl(HOST_CONFIG2(host));
+	sd_blksize[host->id] = au_readl(HOST_BLKSIZE(host));
+	sd_status[host->id]  = au_readl(HOST_STATUS(host));
+	sd_cmd[host->id]     = au_readl(HOST_CMD(host));
+	sd_cmdarg[host->id]  = au_readl(HOST_CMDARG(host));
+	sd_timeout[host->id] = au_readl(HOST_TIMEOUT(host));
+
+	au_writel(0x0, HOST_ENABLE(host));
+
+printk("GU au1xmmc_suspend END\n");
+	return ret;
+}
+
+static int au1xmmc_resume(struct platform_device *pdev)
+{
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	int ret = 0;
+
+	au1xmmc_reset_controller(host);
+
+	au_writel(sd_txport[host->id],  HOST_TXPORT(host));
+	au_writel(sd_rxport[host->id],  HOST_RXPORT(host));
+	au_writel(sd_config[host->id],  HOST_CONFIG(host));
+	au_writel(sd_config2[host->id], HOST_CONFIG2(host));
+	au_writel(sd_blksize[host->id], HOST_BLKSIZE(host));
+	au_writel(sd_status[host->id],  HOST_STATUS(host));
+	au_writel(sd_cmd[host->id],     HOST_CMD(host));
+	au_writel(sd_cmdarg[host->id],  HOST_CMDARG(host));
+	au_writel(sd_timeout[host->id], HOST_TIMEOUT(host));
+
+printk("GU au1xmmc_resume\n");
+	if (mmc)
+		ret = mmc_resume_host(mmc);
+
+printk("GU au1xmmc_resume END\n");
+	return ret;
+}
+
+#else
+#define au1xmmc_suspend  NULL
+#define au1xmmc_resume   NULL
+#endif
+
 static struct platform_driver au1xmmc_driver = {
 	.probe         = au1xmmc_probe,
 	.remove        = au1xmmc_remove,
-	.suspend       = NULL,
-	.resume        = NULL,
+	.suspend       = au1xmmc_suspend,
+	.resume        = au1xmmc_resume,
 	.driver        = {
 		.name  = DRIVER_NAME,
 	},
author
#1 lore raw
Quoted 3 lines · Rodolfo Giometti

Power Management support for AU1100 (PIO mode) added.

Signed-off-by Rodolfo Giometti <[email protected]>

Sorry, I forgot into this patch some debugging messages... :)

Please, use this one instead.

Ciao,

Rodolfo

Signed-off-by Rodolfo Giometti <[email protected]>
Signature · 4 lines
GNU/Linux Solutions                  e-mail:    [email protected]
Linux Device Driver                             [email protected]
Embedded Systems                     		[email protected]
UNIX programming                     phone:     +39 349 2432127
drivers/mmc/au1xmmc.c +70 -2
index 61acf6b..46b4fa5 100644
@@ -19,6 +19,10 @@
  *     Rodolfo Giometti <[email protected]>
  *     Eurotech S.p.A. <[email protected]>
 
+ *  Power Management Support for AU1100 in PIO mode by:
+ *     Rodolfo Giometti <[email protected]>
+ *     Eurotech S.p.A. <[email protected]>
+
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.

@@ -1086,11 +1090,75 @@ #endif
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static u32 sd_txport[2];
+static u32 sd_rxport[2];
+static u32 sd_config[2];
+static u32 sd_config2[2];
+static u32 sd_blksize[2];
+static u32 sd_status[2];
+static u32 sd_cmd[2];
+static u32 sd_cmdarg[2];
+static u32 sd_timeout[2];
+
+static int au1xmmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	int ret = 0;
+
+	if (mmc)
+		ret = mmc_suspend_host(mmc, state);
+
+	sd_txport[host->id]  = au_readl(HOST_TXPORT(host));
+	sd_rxport[host->id]  = au_readl(HOST_RXPORT(host));
+	sd_config[host->id]  = au_readl(HOST_CONFIG(host));
+	sd_config2[host->id] = au_readl(HOST_CONFIG2(host));
+	sd_blksize[host->id] = au_readl(HOST_BLKSIZE(host));
+	sd_status[host->id]  = au_readl(HOST_STATUS(host));
+	sd_cmd[host->id]     = au_readl(HOST_CMD(host));
+	sd_cmdarg[host->id]  = au_readl(HOST_CMDARG(host));
+	sd_timeout[host->id] = au_readl(HOST_TIMEOUT(host));
+
+	au_writel(0x0, HOST_ENABLE(host));
+
+	return ret;
+}
+
+static int au1xmmc_resume(struct platform_device *pdev)
+{
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	int ret = 0;
+
+	au1xmmc_reset_controller(host);
+
+	au_writel(sd_txport[host->id],  HOST_TXPORT(host));
+	au_writel(sd_rxport[host->id],  HOST_RXPORT(host));
+	au_writel(sd_config[host->id],  HOST_CONFIG(host));
+	au_writel(sd_config2[host->id], HOST_CONFIG2(host));
+	au_writel(sd_blksize[host->id], HOST_BLKSIZE(host));
+	au_writel(sd_status[host->id],  HOST_STATUS(host));
+	au_writel(sd_cmd[host->id],     HOST_CMD(host));
+	au_writel(sd_cmdarg[host->id],  HOST_CMDARG(host));
+	au_writel(sd_timeout[host->id], HOST_TIMEOUT(host));
+
+	if (mmc)
+		ret = mmc_resume_host(mmc);
+
+	return ret;
+}
+
+#else
+#define au1xmmc_suspend  NULL
+#define au1xmmc_resume   NULL
+#endif
+
 static struct platform_driver au1xmmc_driver = {
 	.probe         = au1xmmc_probe,
 	.remove        = au1xmmc_remove,
-	.suspend       = NULL,
-	.resume        = NULL,
+	.suspend       = au1xmmc_suspend,
+	.resume        = au1xmmc_resume,
 	.driver        = {
 		.name  = DRIVER_NAME,
 	},