Skip to contentSkip to conversation

PATCH: remove old drivers/char/s3c2410_rtc.c

PATCH Ben Dooks 1 participant 1 message Aug 11, 2006

Subsystems (2)
lore
Share & tools
lore

Ben Dooks

author
#0 lore raw

This can now be removed, since there is now
a drivers/rtc/rtc-s3c.c driver.

drivers/char/Kconfig +0 -8
diff -urpN -X linux-2.6.18-rc1-bjd1/Documentation/dontdiff linux-2.6.18-rc1-bjd1/drivers/char/Kconfig linux-2.6.18-rc1-bjd3/drivers/char/Kconfig
@@ -801,14 +801,6 @@ config DS1302
 	  will get access to the real time clock (or hardware clock) built
 	  into your computer.
 
-config S3C2410_RTC
-	bool "S3C2410 RTC Driver"
-	depends on ARCH_S3C2410
-	help
-	  RTC (Realtime Clock) driver for the clock inbuilt into the
-	  Samsung S3C2410. This can provide periodic interrupt rates
-	  from 1Hz to 64Hz for user programs, and wakeup from Alarm.
-
 config COBALT_LCD
 	bool "Support for Cobalt LCD"
 	depends on MIPS_COBALT
drivers/char/Makefile +0 -1
diff -urpN -X linux-2.6.18-rc1-bjd1/Documentation/dontdiff linux-2.6.18-rc1-bjd1/drivers/char/Makefile linux-2.6.18-rc1-bjd3/drivers/char/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_EFI_RTC)		+= efirtc.o
 obj-$(CONFIG_SGI_DS1286)	+= ds1286.o
 obj-$(CONFIG_SGI_IP27_RTC)	+= ip27-rtc.o
 obj-$(CONFIG_DS1302)		+= ds1302.o
-obj-$(CONFIG_S3C2410_RTC)	+= s3c2410-rtc.o
 ifeq ($(CONFIG_GENERIC_NVRAM),y)
   obj-$(CONFIG_NVRAM)	+= generic_nvram.o
 else
drivers/char/s3c2410-rtc.c +0 -591

591 lines not on this page · raw message