VMPLIT question
While building a newer kernel for a server (which had been running 2.6.12 or so), I spent some time looking for how to set the VMSPLIT .config options. I searched in menuconfig for VMSPLIT and was given a few responses, all similar to this:
│ Symbol: VMSPLIT_3G [=n]
│ Prompt: 3G/1G user/kernel split
│ Defined at arch/i386/Kconfig:488
│ Depends on: <choice>
Since depending on "<choice>" is less than helpful, I did an rgrep and found what it actually depends on:
depends on EXPERIMENTAL && !X86_PAE
prompt "Memory split" if EMBEDDED
default VMSPLIT_3G
and was able to determine that I needed the patch recently submitted by Dave Hansen to enable VMSPLIT for highmem kernels. Is there a reason that menuconfig is not able to tell me this, i.e. this is a known limitation of the choice syntax?
Thanks,
Nish
Signature · 2 lines
Nishanth Aravamudan <[email protected]> IBM Linux Technology Center
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 18 lines · Dave Hansen
Quoted 17 lines · Nishanth Aravamudan
While building a newer kernel for a server (which had been running 2.6.12 or so), I spent some time looking for how to set the VMSPLIT .config options. I searched in menuconfig for VMSPLIT and was given a few responses, all similar to this:
â?????? Symbol:
VMSPLIT_3G[=n]
â?????? Prompt: 3G/1G user/kernel split
â?????? Defined atarch/i386/Kconfig:488
â?????? Depends on: <choice>Since depending on "<choice>" is less than helpful, I did an rgrep and found what it actually depends on:
depends on EXPERIMENTAL && !X86_PAE
prompt "Memory split" if EMBEDDED
defaultVMSPLIT_3G
Quoted 7 lines
Quoted 4 lines
and was able to determine that I needed the patch recently submitted by Dave Hansen to enable VMSPLIT for highmem kernels. Is there a reason that menuconfig is not able to tell me this, i.e. this is a known limitation of the choice syntax?
You need to ask for help with the high-level option, not the actual "choice":
The "high-level option" being ...? What did you search for in menuconfig to get the following? And, in any case, how is it useful to return a "(null)" symbol name?
Quoted 7 lines
??? Symbol: (null) [=y] ??? ??? Prompt: Memory split ??? ??? Defined at arch/i386/Kconfig:494 ??? ??? Depends on: EXPERIMENTAL && !X86_PAE && EMBEDDED ??? ??? Location: ??? ??? -> Processor type and features ??? ??? Selected by: EXPERIMENTAL && !X86_PAE && EMBEDDED && m ???
Thanks,
Nish
Signature · 2 lines
Nishanth Aravamudan <[email protected]> IBM Linux Technology Center
Quoted 4 lines · Nishanth Aravamudan
Quoted 2 lines
You need to ask for help with the high-level option, not the actual "choice":
The "high-level option" being ...?
In menuconfig, at least:
"Memory split (3G/1G user/kernel split) --->"
Inside of "Processor type and features".
Quoted 3 lines
What did you search for in menuconfig
to get the following? And, in any case, how is it useful to return a "(null)" symbol name?
The trouble is that the help text is associated with the top-level "choice" Kconfig entry, not the _individual_ choices. There is no symbol associated with the top-level one. It might be useful to allow help text to be associated with individual "choice" entries, to display that text in the high-level option, and to replace the "null" symbol with something that says "this choice can select any of these symbols:
FOO, BAR, etc..."
I'm sure the Kconfig folks take patches. :P
-- Dave
Quoted 11 lines · Dave Hansen
Quoted 4 lines · Nishanth Aravamudan
Quoted 2 lines
You need to ask for help with the high-level option, not the actual "choice":
The "high-level option" being ...?
In menuconfig, at least:
"Memory split (3G/1G user/kernel split) --->"Inside of "Processor type and features".
I think you missed the point. If you don't know that the "Memory Split" submenu is hidden unless you enable EMBEDDED && EXPERIMENTAL and are !X86_PAE (the latter was the problem here, until I applied your patch), then this is not helpful. You'll do what I did, and search for VMSPLIT in menuconfig and get the results I pasted in my first mail, which as I said then are less than helpful.
Quoted 10 lines
Quoted 2 lines
What did you search for in menuconfig to get the following? And, in any case, how is it useful to return a "(null)" symbol name?
The trouble is that the help text is associated with the top-level "choice"
Kconfigentry, not the _individual_ choices. There is no symbol associated with the top-level one. It might be useful to allow help text to be associated with individual "choice" entries, to display that text in the high-level option, and to replace the "null" symbol with something that says "this choice can select any of these
symbols: FOO, BAR, etc..."
Right, I gathered as much...
Quoted 1 line
I'm sure the
Kconfigfolks take patches. :P
And that's what I had Roman and Sam on the Cc, as I wanted their input if this was a worthwhile change.
Thanks,
Nish
Signature · 2 lines
Nishanth Aravamudan <[email protected]> IBM Linux Technology Center
Quoted 4 lines · Nishanth Aravamudan
Quoted 1 line
I'm sure the
Kconfigfolks take patches. :PAnd that's what I had Roman and Sam on the Cc, as I wanted their input if this was a worthwhile change.
IMO this would be nice to have fixed - but this part of kconfig is really Roman's area.
Sam