reiserfs on-demand bitmap loading, what is the state?
Hello,
I set up a new raid system with about 500gib space and put reiserfs on it. It takes some seconds to mount so I patched my 2.6.17.8-tree with those reiserfs-patches from -mm. Mount time was reduced significantly (less than a second).
What I found out about these patches is that they can introduce instability, but that seemed a bit vague to me.
Up to now I didn't encounter any problems, so are there (theoretical?) problems with the on-demand code? Could that stuff go into mainline? Maybe there are tests I could run, the data on that box is easily recoverable ...
Regards
Signature · 5 lines
--------------------------------------- Malte Schröder [email protected] ICQ# 68121508 ---------------------------------------
Quoted 7 lines · On Wed, 16 Aug 2006 17:58:38 +0200 Malte Schr__der <[email protected]> wrote:
Hello,
I set up a new raid system with about 500gib space and put reiserfs on it. It takes some seconds to mount so I patched my 2.6.17.8-tree with those reiserfs-patches from -mm. Mount time was reduced significantly (less than a second).
What I found out about these patches is that they can introduce instability, but that seemed a bit vague to me.
The first version of the patches was (terribly) buggy. The version in current -mm has no known (to me) shortcomings.
Quoted 2 lines
Up to now I didn't encounter any problems, so are there (theoretical?) problems with the on-demand code? Could that stuff go into mainline?
Expect to see it in 2.6.19-rc1.
Quoted 2 lines
Maybe there are tests I could run, the data on that box is easily recoverable ...
Yup, please run tests - anything and everything.
Be sure to run reiserfsck before the testing to make sure the fs is clean, then run it again at the end of testing, see if anything ended up out of place.
Quoted 5 lines · Andrew Morton
On Wed, 16 Aug 2006 17:58:38 +0200
Quoted 2 lines
Maybe there are tests I could run, the data on that box is easily recoverable ...
Yup, please run tests - anything and everything.
I did some benchmarking and other stuff (creating files, moving files around and stuff like this) to try to stress the fs a bit and simply put it to my everyday usage. Nothing unusual showed up.
Quoted 4 lines
Be sure to run reiserfsck before the testing to make sure the fs is clean, then run it again at the end of testing, see if anything ended up out of place.
I did.
Signature · 5 lines
--------------------------------------- Malte Schröder [email protected] ICQ# 68121508 ---------------------------------------