Skip to contentSkip to conversation

rt2x00: change variable name

PATCH In review Ivo van Doorn 1 participant 1 message Aug 27, 2006

Subsystems (3)
Networking Network drivers Networking drivers (wireless)
lore
Share & tools
lore

Ivo van Doorn

author
#0 lore raw

PATCH 8/10 rt2x00: change variable name

When setting the ARCSR registers we could use a better/more descriptive and already available variable name than plain "value".

Signed-off-by Ivo van Doorn <[email protected]>

---

drivers/net/wireless/d80211/rt2x00/rt2400pci.c +5 -5
diff -rU3 wireless-dev-rt2x00-netif/drivers/net/wireless/d80211/rt2x00/rt2400pci.c wireless-dev-rt2x00-variable/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
@@ -773,12 +773,12 @@
 	rt2x00_set_field32(&reg[0], TXCSR1_ACK_CONSUME_TIME, value);
 	rt2x00_register_write(rt2x00dev, TXCSR1, reg[0]);
 
-	value = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 8 : 0;
+	preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 8 : 0;
 
-	reg[0] = cpu_to_le32(0x00700400 | value);	/* ARCSR2 */
-	reg[1] = cpu_to_le32(0x00380401 | value);	/* ARCSR3 */
-	reg[2] = cpu_to_le32(0x00150402 | value);	/* ARCSR4 */
-	reg[3] = cpu_to_le32(0x000b8403 | value);	/* ARCSR5 */
+	reg[0] = cpu_to_le32(0x00700400 | preamble);	/* ARCSR2 */
+	reg[1] = cpu_to_le32(0x00380401 | preamble);	/* ARCSR3 */
+	reg[2] = cpu_to_le32(0x00150402 | preamble);	/* ARCSR4 */
+	reg[3] = cpu_to_le32(0x000b8403 | preamble);	/* ARCSR5 */
 
 	rt2x00_register_multiwrite(rt2x00dev, ARCSR2, &reg[0], sizeof(reg));
 }
drivers/net/wireless/d80211/rt2x00/rt2500pci.c +5 -5
diff -rU3 wireless-dev-rt2x00-netif/drivers/net/wireless/d80211/rt2x00/rt2500pci.c wireless-dev-rt2x00-variable/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
@@ -839,12 +839,12 @@
 	rt2x00_set_field32(&reg[0], TXCSR1_ACK_CONSUME_TIME, value);
 	rt2x00_register_write(rt2x00dev, TXCSR1, reg[0]);
 
-	value = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 8 : 0;
+	preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 8 : 0;
 
-	reg[0] = cpu_to_le32(0x00700400 | value);	/* ARCSR2 */
-	reg[1] = cpu_to_le32(0x00380401 | value);	/* ARCSR3 */
-	reg[2] = cpu_to_le32(0x00150402 | value);	/* ARCSR4 */
-	reg[3] = cpu_to_le32(0x000b8403 | value);	/* ARCSR5 */
+	reg[0] = cpu_to_le32(0x00700400 | preamble);	/* ARCSR2 */
+	reg[1] = cpu_to_le32(0x00380401 | preamble);	/* ARCSR3 */
+	reg[2] = cpu_to_le32(0x00150402 | preamble);	/* ARCSR4 */
+	reg[3] = cpu_to_le32(0x000b8403 | preamble);	/* ARCSR5 */
 
 	rt2x00_register_multiwrite(rt2x00dev, ARCSR2, &reg[0], sizeof(reg));
 }