Skip to contentSkip to conversation

highmem64g vs. swsusp

DISCUSSION Pavel Machek 1 participant 1 message Aug 31, 2006

lore
Share & tools
lore
#0 lore raw

Hi!

Quoted 13 lines
Quoted 12 lines

Using a Lenovo T60 laptop - suspend to disk has always failed for me on resume.

Through trial and error, I've found that this problem only occurs with
CONFIG_HIGHMEM64G (the default in a Fedora installation). On a couple of
occasions I've seen a hang or an oops instead of a reboot. Apologies for the
poor quality, but an image of the oops screen can be found at
http://www.dresco.co.uk/debug/resume_from_disk.jpg

Quoted 7 lines

I had the same problem on my IBM x60s. In my case, I see no oops. Just
reboot right after resume with CONFIG_HIGHMEM64G=y. Turning off
CONFIG_HIGHMEM64G, problem goes away. Don't know how to fix. Just to
confirm your findings. 2.6.18-rc5 has the same problem.

AFAIKK _all_ versions of swsusp have problem with highmem64g. I'll need to bandaid it with config check for now.

Signature · 4 lines
Thanks for all the (sleeping) penguins.

-- 
Thanks for all the (sleeping) penguins.