problems with printing over cups
Hello @all,
since some time the printing from dosemu does not work anymore.It worked well times before. I don't know what is happend that the printing isn't working now.
We use dosemu 1.2.1.0, debian linux 3.1 and Cups1.1.23-10sarge1 Is something wrong with dosemu.conf or ~/.dosemurc?
Who can help?
Thanks in advance
Dagmar
~/.dosemurc:
$_printer = "windows_knut"
# windows_knut is a raw printer installed with cups
/etc/dosemu/dosemu.conf:
#############################################################################
# # This file is /etc/dosemu.conf, included by <DOSEMU_LIB_DIR>/global.conf # # Linux DOSEMU configuration for parser versions >= 3 (dosemu-0.97.0.1) #
# ./doc/README.txt (chapter 2.) contains a description of the syntax
# and the usage of dosemu.conf. # # # Access rights are defined in # # /etc/dosemu.users # ############################################################################# #
# Notes for editing this section:
#
# In $_xxx = (n) n is a numerical or boolean value # = = # In $_zzz = "s" s is a string
#
# Please edit only beteen the brakets and quotes and keep the rest intact.
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^
$_debug = "-a" # same format as -D commandline option
# (but without the -D in front)
$_features= "" # list of temporary hacks, see release notes in
# the file ChangeLog. e.g "0:1 2:0", which means
# to set feature_0 to 1 and feature_2 to 0.
$_mapping= "" # prefered mapping driver, one of:
# auto, mapself, mapfile, mapshm
$_timint = (on) # emulate INT08 type timer interrupts
$_mathco = (on) # or off
$_cpu = "80386" # CPU showing to DOS, valid values: "80[345]86"
# or "emulated" for non-native CPU (386 in this case)$_rdtsc = (on) # if possible use Pentium cycle counter
$_cpuspeed = (0) # 0 = calibrated by dosemu, else given (e.g.166.666)
$_pci = (off)
$_xms = (1024) # in Kbyte
$_ems = (2048) # in Kbyte
$_ems_frame = (0xe000)
$_dpmi = (off) # in Kbyte
$_dosmem = (640) # in Kbyte, < 640
$_hardware_ram = "" # list of segment values/ranges such as
# "0xc8000 range 0xcc000,0xcffff"$_secure ="ngd" # secure for: n (normal users), g (guest), d (dexe)
# empty string: depending on 'restricted'
# "0": always insecure (not recommended)
$_odd_hosts = "" # black list such as "lucifer.hell.com billy.the.cat"
$_diskless_hosts="" # black list such as "hacker1 newbee gateway1"$_emusys = "" # empty or 3 char., config.sys -> config.XXX $_emubat = "" # empty or 3 char., autoexec.bat -> autoexec.XXX $_emuini = "" # empty or 3 char., system.ini -> system.XXX
$_hogthreshold = (1) # 0 == all CPU power to DOSEMU
$_irqpassing = "" # list of IRQ number (2-15) to pass to DOS such as
# "3 8 10"
$_speaker = "" # or "native" or "emulated"
## $_term_char_set = "" # Global code page and character set selection. $_term_char_set = "ibm" # Global code page and character set selection.
# "" == automatic, else: ibm, latin, latin1, latin2
$_term_color = (on) # terminal with color support $_term_updfreq = (4) # time between refreshs (units: 20 == 1 second) $_escchar = (30) # 30 == Ctrl-^, special-sequence prefix
$_rawkeyboard = (0) # bypass normal keyboard input, maybe dangerous
$_layout = "de-latin1" # one of: finnish(-latin1), de(-latin1), be, it, us
# uk, dk(-latin1), keyb-no, no-latin1, dvorak, po
# sg(-latin1), fr(-latin1), sf(-latin1), es(-latin1)
# sw, hu(-latin2), hu-cwi, keyb-user
# hr-cp852, hr-latin2, cz-qwerty, cz-qwertz.
# Or 'auto' (which tries to generate the table from
# the current Linux console settings)$_keybint = (on) # emulate PCish keyboard interrupt
$_X_updfreq = (5) # time between refreshs (units: 20 == 1 second)
$_X_title = "DOS in a BOX" # Title in the top bar of the window
$_X_icon_name = "xdos" # Text for icon, when minimized
$_X_keycode = (auto) # on == translate keybord via dosemu keytables
# or 'off' or 'auto'
$_X_blinkrate = (8) # blink rate for the cursor
#Test für anderen Pfad
# $_X_font = "/etc/X11/fonts/misc" # basename
from /usr/X11R6/lib/X11/fonts/misc/*
$_X_font = "/usr/X11R6/lib/X11/fonts/misc/"
# (without extension) e.g. "vga"
$_X_mitshm = (on) # Use shared memory extensions
$_X_sharecmap = (off) # share the colormap with other applications
$_X_fixed_aspect = (on) # Set fixed aspect for resize the graphics window
$_X_aspect_43 = (on) # Always use an aspect ratio of 4:3 for graphics
$_X_lin_filt = (off) # Use linear filtering for >15 bpp interpolation
$_X_bilin_filt = (off) # Use bi-linear filtering for >15 bpp interpolation
$_X_mode13fact = (2) # initial size factor for video mode 0x13 (320x200)
$_X_winsize = "" # "x,y" of initial windows size (defaults to float)
$_X_gamma = (1.0) # gamma correction
$_X_vgaemu_memsize = (1024) # size (in Kbytes) of the frame buffer for
emulated vga
$_X_lfb = (on) # use linear frame buffer in VESA modes
$_X_pm_interface = (on) # use protected mode interface for VESA modes
$_X_mgrab_key = "Home" # KeySym name to activate mouse grab, empty == off
$_X_vesamode = "" # "xres,yres ... xres,yres"
# List of vesamodes to add. The list has to contain
# SPACE separated "xres,yres" pairs$_video = "vga" # one of: plainvga, vga, ega, mda, mga, cga $_console = (0) # use 'console' video $_graphics = (0) # use the cards BIOS to set graphics
$_videoportaccess = (1) # allow videoportaccess when 'graphics' enabled $_vbios_seg = (0xc000) # set the address of your VBIOS (e.g. 0xe000) $_vbios_size = (0x10000)# set the size of your BIOS (e.g. 0x8000)
$_vmemsize = (1024) # size of regen buffer
$_chipset = "" # one of: plainvga, trident, et4000, diamond, avance
# cirrus, matrox, wdvga, paradise, ati, s3, sis
$_dualmon = (0) # if you have one vga _plus_ one hgc (2 monitors)
$_vbootfloppy = "" # if you want to boot from a virtual floppy:
# file name of the floppy image under DOSEMU_LIB_DIR
# e.g. "floppyimage" disables $_hdimage
# "floppyimage +hd" does _not_ disable $_hdimage
$_floppy_a ="threeinch:/dev/fd0" # or "fiveinch" or "atapi" or empty,
if not existing
# optionally the device may be appended such as
# "threeinch:/dev/fd0"
$_floppy_b = "" # dito for B:#$_hdimage = "msdos/"# list of hdimages under DOSEMU_LIB_DIR $_hdimage = "freedos:ro"# list of hdimages under DOSEMU_LIB_DIR
# assigned in this order such as
# "hdimage_c hdimage_d hdimage_e"
# If the name begins with '/dev/', then partion
# access is done instead of virtual hdimage such as
# "/dev/hda1" or "/dev/hda1:ro" for readonly
# Currently mounted devices and swap are refused.
# Hdimages and devices may be mixed such as
# "hdimage_c /dev/hda1 /dev/hda3:ro"
# Note: 'wholedisk' is _not_ supported.
$_hdimage_r = $_hdimage # hdimages for 'restricted access (if different)$_aspi = "" # list of generic SCSI devices to make available
# for the builtin aspi driver (format of an entry
# is 'device:type:mappedtarget' such as
# "sg2:WORM sg3:Sequential-Access:6 sg4:CD-ROM" or
# "sg2:4 sg3:1:6 sg4:5" (which are equal)$_com1 = "" # e.g. "/dev/mouse" or "/dev/ttyS0" $_com2 = "" # e.g. "/dev/modem" or "/dev/ttyS1" $_com3 = "" # dito "/dev/ttyS2" $_com4 = "" # dito "/dev/ttyS3"
# Note: all "/dev/ttyXX" may be suffixed by the IRQ # used (instead of the default one), such as # "/dev/ttyS2 irq 5" or "/dev/ttyS3 irq 9"
$_ttylocks = "" # Lock directory (e.g. "/var/lock")
# default ("") is /var/lock$_mouse = "" # one of: microsoft, mousesystems, logitech, mmseries
# mouseman, hitachi, busmouse, ps2, imps2
$_mouse_dev = "" # one of: com1, com2, com3, com4 or /dev/mouse
$_mouse_flags = "" # list of none or one or more of:
# "emulate3buttons cleardtr"
$_mouse_baud = (0) # baudrate, 0 == don't set
# $_printer = "lp" # list of (/etc/printcap) printer names to appear as
$_printer = "" # list of (/etc/printcap) printer names to appear as
# LPT1, LPT2, LPT3 (not all are needed, empty for
none)
$_printer_timeout = (20)# idle time in seconds before spooling out
$_ports = "" # list of portnumbers such as "0x1ce 0x1cf 0x238"
# or "0x1ce range 0x280,0x29f 310"
# or "range 0x1a0,(0x1a0+15)"$_ipxsupport = (off) # or on
$_novell_hack = (off)
# geaendert auf standart aus neuer Verssion 8.9.05 most # $_vnet = (off) # 'on' for packet-multi (used by dosnet) $_vnet = "tap"
$_sound = (off) # sound support on/off
$_sb_base = (0x220)
$_sb_irq = (5)
$_sb_dma = (1)
$_sb_dsp = "/dev/dsp"
$_sb_mixer = "/dev/mixer"
$_mpu_base = "0x330"
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Dagmar!
Am Mittwoch, 6. September 2006 09:06 schrieb Dagmar Teichmann:
Quoted 6 lines
since some time the printing from dosemu does not work anymore.It worked well times before. I don't know what is happend that the printing isn't working now.
We use dosemu 1.2.1.0, debian linux 3.1 and Cups1.1.23-10sarge1 Is something wrong with dosemu.conf or ~/.dosemurc?
Who can help?
Version 1.2.1.0 is too old. I have tried multple times to get a newer Debian package out, but the maintainer does nothing.
On http://resmedicinae.sourceforge.net/manuals/apw_linux/index.html I have described the installation of a german DOS program in DOSemu. If you want an unofficial Debian package of dosemu 1.3.2, contact me personally.
Kind regards
Claudia