Skip to contentSkip to conversation

booting problem

U-Boot-Users Srinivas rao 2 participants 2 messages Sep 15, 2006

lore
Share & tools
lore
#0 lore raw

Hi All,

I faced some problem while booting the linux

Using tftp I copied the linux image into ram at 0x8000 after I used bootm command
at that time its working fine.

But whenever I copied the linux image into flash at 3 to 10 sectors and after I used bootm command but I getting error message like below

## Booting image at 1c060000 ...
Image Name:
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 997788 Bytes = 974.4 kB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux.............................................................
........

crc error

-- System halted

In cmd_bootm command I given 3rd sector addres(0X1c060000)of flash also.
My flashdisk file system starting at 11th sector.

Pls give me tha idea to solve the above problem.

Thanks & Regards
Srinivas Rao.Ch

__________________________________________________________
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/

#1 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

I faced some problem while booting the linux

You posted exactly the same message less than 24 hours ago.

If you need express help you should pay for commercial support.

The free help you can get her eon the list comes when we have time for it, and when we are in the mood of helping you. It may not come at all. Reposting the same message again and again actually reduced the likelyhood that you might receive a response.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Any sufficiently advanced technology is indistinguishable from magic.
                                                   - Arthur C. Clarke