Add Broadcom PHY support
Subsystems (3)
PATCH 1/1 Add Broadcom PHY support
[PATCH] Add Broadcom PHY support
This patch adds a driver to support the bcm5421s and bcm5461s PHY
Kernel version: linux-2.6.18-rc6
drivers/net/phy/broadcom.c new file +129 -0
@@ -0,0 +1,129 @@ +/* +* drivers/net/phy/broadcom.c, Driver for Broadcom PHYs +* +* Copyright (c) 2006 Wind River Systems, Inc. +* Written by Amy Fong +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +* See the GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +*/ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> + +/* BCM5421S control register */ +#define MII_BCM5421S_CONTROL 0x00 +#define MII_BCM5421S_CONTROL_RESET 0x00008000 +#define MII_BCM5421S_CONTROL_INIT 0x00001140 +#define MII_BCM5421S_ANEN 0x00001000 +#define MII_BCM5421S_CR 0x00 +#define MII_BCM5421S_CR_RST 0x00008000 +#define MII_BCM5421S_CR_INIT 0x00001000 +#define MII_BCM5421S_STATUS 0x1 +#define MII_BCM5421S_STATUS_AN_DONE 0x00000020 +#define MII_BCM5421S_STATUS_LINK 0x0004 +#define MII_BCM5421S_PHYIR1 0x2 +#define MII_BCM5421S_PHYIR2 0x3 +#define MII_BCM5421S_ANLPBPA 0x5 +#define MII_BCM5421S_ANLPBPA_HALF 0x00000040 +#define MII_BCM5421S_ANLPBPA_FULL 0x00000020 +#define MII_BCM5421S_ANEX 0x6 +#define MII_BCM5421S_ANEX_NP 0x00000004 +#define MII_BCM5421S_ANEX_PRX 0x00000002 + +MODULE_DESCRIPTION ("Broadcom PHY driver" ); +MODULE_AUTHOR ("Amy Fong" ); +MODULE_LICENSE ("GPL" ); + +static int bcm5421s_config_aneg (struct phy_device *phydev) +{ +int err; + +/* Write the appropriate value to the PHY reg */ +if (phydev->supported & SUPPORTED_1000baseT_Full) + err =phy_write (phydev,MII_BCM5421S_CONTROL ,MII_BCM5421S_CONTROL_INIT ); +else + err =phy_write (phydev,MII_BCM5421S_CONTROL ,MII_BCM5421S_CR_INIT ); + +if (err <0 )return err; + +/* doesn't have phy interrupt */ + phydev->interrupts =PHY_INTERRUPT_DISABLED ; + +return 0 ; +} + +static struct phy_driver bcm5421s_driver = { + .phy_id =0x002060e1 , + .phy_id_mask =0x00ffffff , + .name ="Broadcom BCM5421S" , + .features =PHY_GBIT_FEATURES , + .config_aneg = bcm5421s_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner =THIS_MODULE ,}, +}; + +/* Glossy description on Broadcom's site seems to hint that the 5461 +should be a drop-in for the 5421.... */ +static struct phy_driver bcm5461s_driver = { + .phy_id =0x002060c1 , + .phy_id_mask =0x00ffffff , + .name ="Broadcom BCM5461S" , + .features =PHY_GBIT_FEATURES , + .config_aneg = bcm5421s_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner =THIS_MODULE ,}, +}; + +static int __init broadcom_init (void ) +{ +int ret; + + ret =phy_driver_register (&bcm5421s_driver); +if (!ret) { + ret =phy_driver_register (&bcm5461s_driver); +if (ret)phy_driver_unregister (&bcm5421s_driver); + } +return ret; +} + +static void __exit broadcom_exit(void) +{ +phy_driver_unregister (&bcm5421s_driver); +phy_driver_unregister (&bcm5461s_driver); +} + +module_init (broadcom_init); +module_exit (broadcom_exit);
drivers/net/phy/Kconfig +6 -0
@@ -56,6 +56,12 @@ ---help--- Currently supports the LAN83C185 PHY +config BROADCOM_PHY + tristate "Drivers for Broadcom PHYs" + depends on PHYLIB + ---help--- + Currently supports bcm5421s and bcm5461s + config FIXED_PHY tristate "Drivers for PHY emulation on fixed speed/link" depends on PHYLIB
drivers/net/phy/Makefile +1 -0
@@ -10,4 +10,5 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o +obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_FIXED_PHY) += fixed.o
Amy Fong <[email protected]> :
Quoted 3 lines
[PATCH] Add Broadcom PHY support
This patch adds a driver to support the bcm5421s and bcm5461s PHY
Can you add a Signed-off-by: line, put the return statements on a line of their own and Cc: [email protected], [email protected] ?
Signature · 1 line
Ueimor