cio: subchannels in no-path state.
Subsystems (2)
From: Peter Oberparleiter <[email protected]>
[S390] cio: subchannels in no-path state.
Subchannel may incorrectly remain in state no-path after channel paths have reappeared. Currently the scan for subchannels which are using a channel path ends at the first occurrence if a full link address was provided by the channel subsystem. The scan needs to continue over all subchannels.
Signed-off-by Peter Oberparleiter <[email protected]>
Signed-off-by Martin Schwidefsky <[email protected]>
---
drivers/s390/cio/chsc.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletion(-)
drivers/s390/cio/chsc.c +2 -1
@@ -378,6 +378,7 @@ __s390_process_res_acc(struct subchannelif (chp_mask ==0 ) {spin_unlock_irq (&sch->lock); +put_device (&sch->dev);return 0 ; } old_lpm = sch->lpm;
@@ -392,7 +393,7 @@ __s390_process_res_acc(struct subchannelspin_unlock_irq (&sch->lock);put_device (&sch->dev); -return (res_data->fla_mask ==0xffff ) ? -ENODEV :0 ; +return 0 ; }