Skip to contentSkip to conversation

add pci_{request,free}_irq take #2

RFC PATCH In review Frederik Deweerdt 4 participants 15 messages Oct 3, 2006 – Oct 4, 2006

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 add pci_{request,free}_irq take #2

Hi all,

This is take #2 of the "add pci_{request,free}_irq" patch. The following changes have been made since last proposal:
- fix broken kerneldoc (Randy Dunlap)
- change warning message (Alan Cox)
- taken into account the various comments made by Matthew Wilcox
- remove the IRQF_SHARED flag from the request_irq() call: not all drivers (eg. tg3) set it (Arjan van de Ven suggested dropping it before the call, but this may not suit the different usage patterns, tg3 in particular)

I'll send a follow-up patch showing the implied modifications for the following - semi-randomly chosen :) - drivers: aic7xxx, aic79xx, tg3 and e1000 (Dropped the drm one, which was NACKed by the maintainer).

Please note that I'm not submitting the driver changes, they're there only for illustration purposes. I'll CC the appropriate maintainers when/if an API is agreed upon.

Regards,
Frederik

PS: trimmed the CC list a bit, this must be noise to linux-scsi
PPS: used quilt to manage patches, I should have done it long ago :)

drivers/pci/pci.c +0 -0
index a544997..50b49ef 100644
drivers/pci/pci.c +42 -0

54 lines not on this page · raw message

include/linux/interrupt.h +7 -0
Index: 2.6.18-mm3/include/linux/interrupt.h
===================================================================
@@ -75,6 +75,13 @@ struct irqaction {
 	struct proc_dir_entry *dir;
 };
 
+#ifndef ARCH_VALIDATE_PCI_IRQ
+static inline int is_irq_valid(unsigned int irq)
+{
+	return irq ? 1 : 0;
+}
+#endif /* ARCH_VALIDATE_PCI_IRQ */
+
 extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs);
 extern int request_irq(unsigned int,
 		       irqreturn_t (*handler)(int, void *, struct pt_regs *),
include/linux/pci.h +6 -0
Index: 2.6.18-mm3/include/linux/pci.h
===================================================================
@@ -52,6 +52,7 @@
 #include <linux/compiler.h>
 #include <linux/errno.h>
 #include <linux/device.h>
+#include <linux/interrupt.h>
 
 /* File state for mmap()s on /proc/bus/pci/X/Y */
 enum pci_mmap_state {
@@ -532,6 +533,11 @@ void pci_release_regions(struct pci_dev 
 int __must_check pci_request_region(struct pci_dev *, int, const char *);
 void pci_release_region(struct pci_dev *, int);
 
+int __must_check pci_request_irq(struct pci_dev *pdev,
+		    irqreturn_t (*handler)(int, void *, struct pt_regs *),
+		    unsigned long flags, const char *name);
+void pci_free_irq(struct pci_dev *pdev);
+
 /* drivers/pci/bus.c */
 int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
 			struct resource *res, resource_size_t size,
#1 lore raw

RFC PATCH 1/1 move aic7xxx to pci_request_irq

Hi,

This proof-of-concept patch converts the aic7xxx driver to use the pci_request_irq() function.

Please note that I'm not submitting the driver changes, they're there only for illustration purposes. I'll CC the appropriate maintainers when/if an API is agreed upon.

Regards,
Frederik

drivers/scsi/aic7xxx/aic7xxx_osm.h +0 -0
index 86ea7ac..24f70bc 100644
drivers/scsi/aic7xxx/aic7xxx_osm.h +0 -1
Index: 2.6.18-mm3/drivers/scsi/aic7xxx/aic7xxx_osm.h
===================================================================
@@ -561,7 +561,6 @@ static inline void	ahc_linux_eisa_exit(v
 int			 ahc_linux_pci_init(void);
 void			 ahc_linux_pci_exit(void);
 int			 ahc_pci_map_registers(struct ahc_softc *ahc);
-int			 ahc_pci_map_int(struct ahc_softc *ahc);
 
 static __inline uint32_t ahc_pci_read_config(ahc_dev_softc_t pci,
 					     int reg, int width);
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c +0 -13
Index: 2.6.18-mm3/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
===================================================================
@@ -368,16 +368,3 @@ ahc_pci_map_registers(struct ahc_softc *
 	return (error);
 }
 
-int
-ahc_pci_map_int(struct ahc_softc *ahc)
-{
-	int error;
-
-	error = request_irq(ahc->dev_softc->irq, ahc_linux_isr,
-			    IRQF_SHARED, "aic7xxx", ahc);
-	if (error == 0)
-		ahc->platform_data->irq = ahc->dev_softc->irq;
-	
-	return (-error);
-}
-
drivers/scsi/aic7xxx/aic7xxx_pci.c +12 -6
Index: 2.6.18-mm3/drivers/scsi/aic7xxx/aic7xxx_pci.c
===================================================================
@@ -968,13 +968,19 @@ ahc_pci_config(struct ahc_softc *ahc, st
 
 	/*
 	 * Allow interrupts now that we are completely setup.
-	 */
-	error = ahc_pci_map_int(ahc);
-	if (error != 0)
-		return (error);
+	 *
+	 * Note: pci_request_irq return value is negated due to aic7xxx
+	 * error handling style
+	 */
+	error = -pci_request_irq(ahc->dev_softc, ahc_linux_isr,
+				 IRQF_SHARED, "aic7xxx");
+
+	if (!error) {
+		ahc->platform_data->irq = ahc->dev_softc->irq;
+		ahc->init_level++;
+	}
 
-	ahc->init_level++;
-	return (0);
+	return error;
 }
 
 /*
#2 lore raw
In reply to Frederik Deweerdt
Quoted 12 lines · Frederik Deweerdt
drivers/pci/pci.c +12 -0
+int pci_request_irq(struct pci_dev *pdev,
+		    irqreturn_t(*handler) (int, void *, struct pt_regs *),
+		    unsigned long flags, const char *name)
+{
+	if (!is_irq_valid(pdev->irq)) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "No usable irq line was found (got #%d)\n",
+			   pdev->irq);
+		return -EINVAL;
+	}
+
+	return request_irq(pdev->irq, handler, flags,

drivers/pci/pci.c err_out: · line 852

Quoted 10 lines
drivers/pci/pci.c +9 -0
+			   name ? name : pdev->driver->name,
+			   pci_get_drvdata(pdev));
+}
+EXPORT_SYMBOL(pci_request_irq);
 
+void pci_free_irq(struct pci_dev *pdev)
+{
+	free_irq(pdev->irq, pci_get_drvdata(pdev));
+}
+EXPORT_SYMBOL(pci_free_irq);

ACK these parts

Quoted 5 lines

Index: 2.6.18-mm3/include/linux/interrupt.h
===================================================================

include/linux/interrupt.h struct irqaction { · line 83

Quoted 9 lines
include/linux/interrupt.h +6 -0
@@ -75,6 +75,13 @@ struct irqaction {
 	struct proc_dir_entry *dir;
 };
 
+#ifndef ARCH_VALIDATE_PCI_IRQ
+static inline int is_irq_valid(unsigned int irq)
+{
+	return irq ? 1 : 0;
+}
+#endif /* ARCH_VALIDATE_PCI_IRQ */

It's not appropriate to have PCI IRQ stuff in linux/interrupt.h.

This is precisely why I passed 'struct pci_dev *' to a PCI-specific irq validation function, and prototyped it in linux/pci.h.

Jeff

#6 lore raw

RFC PATCH 1/1 move aic79xx to pci_request_irq

In reply to Frederik Deweerdt

Hi,

This proof-of-concept patch converts the aic79xx driver to use the pci_request_irq() function.

Please note that I'm not submitting the driver changes, they're there only for illustration purposes. I'll CC the appropriate maintainers when/if an API is agreed upon.

Regards,
Frederik

drivers/scsi/aic7xxx/aic79xx_osm.h +0 -0
index 448c39c..67897d4 100644
drivers/scsi/aic7xxx/aic79xx_osm.h +0 -1
Index: 2.6.18-mm3/drivers/scsi/aic7xxx/aic79xx_osm.h
===================================================================
@@ -594,7 +594,6 @@ void ahd_power_state_change(struct ahd_s
 int			 ahd_linux_pci_init(void);
 void			 ahd_linux_pci_exit(void);
 int			 ahd_pci_map_registers(struct ahd_softc *ahd);
-int			 ahd_pci_map_int(struct ahd_softc *ahd);
 
 static __inline uint32_t ahd_pci_read_config(ahd_dev_softc_t pci,
 					     int reg, int width);
drivers/scsi/aic7xxx/aic79xx_osm_pci.c +0 -13
Index: 2.6.18-mm3/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
===================================================================
@@ -336,19 +336,6 @@ ahd_pci_map_registers(struct ahd_softc *
 	return (error);
 }
 
-int
-ahd_pci_map_int(struct ahd_softc *ahd)
-{
-	int error;
-
-	error = request_irq(ahd->dev_softc->irq, ahd_linux_isr,
-			    IRQF_SHARED, "aic79xx", ahd);
-	if (!error)
-		ahd->platform_data->irq = ahd->dev_softc->irq;
-	
-	return (-error);
-}
-
 void
 ahd_power_state_change(struct ahd_softc *ahd, ahd_power_state new_state)
 {
drivers/scsi/aic7xxx/aic79xx_pci.c +10 -2
Index: 2.6.18-mm3/drivers/scsi/aic7xxx/aic79xx_pci.c
===================================================================
@@ -376,10 +376,18 @@ ahd_pci_config(struct ahd_softc *ahd, st
 
 	/*
 	 * Allow interrupts now that we are completely setup.
+	 *
+	 * Note: pci_request_irq return value is negated due to aic79xx
+	 * error handling style
 	 */
-	error = ahd_pci_map_int(ahd);
-	if (!error)
+
+	error = -pci_request_irq(ahd->dev_softc, ahd_linux_isr,
+				 IRQF_SHARED, "aic79xx");
+	if (!error) {
+		ahd->platform_data->irq = ahd->dev_softc->irq;
 		ahd->init_level++;
+	}
+
 	return error;
 }
 
#7 lore raw

RFC PATCH 1/1 move tg3 to pci_request_irq

In reply to Frederik Deweerdt

Hi,

This proof-of-concept patch converts the tg3 driver to use the pci_request_irq() function.

Please note that I'm not submitting the driver changes, they're there only for illustration purposes. I'll CC the appropriate maintainers when/if an API is agreed upon.

Regards,
Frederik

drivers/net/tg3.c +0 -0
index c25ba27..23660c6 100644
drivers/net/tg3.c +9 -10
Index: 2.6.18-mm3/drivers/net/tg3.c
===================================================================
@@ -6853,7 +6853,7 @@ static int tg3_request_irq(struct tg3 *t
 			fn = tg3_interrupt_tagged;
 		flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
 	}
-	return (request_irq(tp->pdev->irq, fn, flags, dev->name, dev));
+	return pci_request_irq(tp->pdev, fn, flags, dev->name);
 }
 
 static int tg3_test_interrupt(struct tg3 *tp)
@@ -6866,10 +6866,10 @@ static int tg3_test_interrupt(struct tg3
 
 	tg3_disable_ints(tp);
 
-	free_irq(tp->pdev->irq, dev);
+	pci_free_irq(tp->pdev);
 
-	err = request_irq(tp->pdev->irq, tg3_test_isr,
-			  IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
+	err = pci_request_irq(tp->pdev, tg3_test_isr,
+			      IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name);
 	if (err)
 		return err;
 
@@ -6897,7 +6897,7 @@ static int tg3_test_interrupt(struct tg3
 
 	tg3_disable_ints(tp);
 
-	free_irq(tp->pdev->irq, dev);
+	pci_free_irq(tp->pdev);
 
 	err = tg3_request_irq(tp);
 
@@ -6915,7 +6915,6 @@ static int tg3_test_interrupt(struct tg3
  */
 static int tg3_test_msi(struct tg3 *tp)
 {
-	struct net_device *dev = tp->dev;
 	int err;
 	u16 pci_cmd;
 
@@ -6946,7 +6945,7 @@ static int tg3_test_msi(struct tg3 *tp)
 	       "the PCI maintainer and include system chipset information.\n",
 		       tp->dev->name);
 
-	free_irq(tp->pdev->irq, dev);
+	pci_free_irq(tp->pdev);
 	pci_disable_msi(tp->pdev);
 
 	tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
@@ -6966,7 +6965,7 @@ static int tg3_test_msi(struct tg3 *tp)
 	tg3_full_unlock(tp);
 
 	if (err)
-		free_irq(tp->pdev->irq, dev);
+		pci_free_irq(tp->pdev);
 
 	return err;
 }
@@ -7051,7 +7050,7 @@ static int tg3_open(struct net_device *d
 	tg3_full_unlock(tp);
 
 	if (err) {
-		free_irq(tp->pdev->irq, dev);
+		pci_free_irq(tp->pdev);
 		if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
 			pci_disable_msi(tp->pdev);
 			tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
@@ -7363,7 +7362,7 @@ static int tg3_close(struct net_device *
 
 	tg3_full_unlock(tp);
 
-	free_irq(tp->pdev->irq, dev);
+	pci_free_irq(tp->pdev);
 	if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
 		pci_disable_msi(tp->pdev);
 		tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
#13 lore raw

RFC PATCH 1/1 move e1000 to pci_request_irq

In reply to Frederik Deweerdt

Hi,

This proof-of-concept patch converts the e1000 driver to use the pci_request_irq() function.

Please note that I'm not submitting the driver changes, they're there only for illustration purposes. I'll CC the appropriate maintainers when/if an API is agreed upon.

Regards,
Frederik

drivers/net/e1000/e1000_ethtool.c +0 -0
index 778ede3..8b7be73 100644
drivers/net/e1000/e1000_ethtool.c +5 -6
Index: 2.6.18-mm3/drivers/net/e1000/e1000_ethtool.c
===================================================================
@@ -899,17 +899,16 @@ e1000_intr_test(struct e1000_adapter *ad
 {
 	struct net_device *netdev = adapter->netdev;
 	uint32_t mask, i=0, shared_int = TRUE;
-	uint32_t irq = adapter->pdev->irq;
 
 	*data = 0;
 
 	/* NOTE: we don't test MSI interrupts here, yet */
 	/* Hook up test interrupt handler just for this test */
-	if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED,
-			 netdev->name, netdev))
+	if (!pci_request_irq(adapter->pdev, &e1000_test_intr, IRQF_PROBE_SHARED,
+			    netdev->name))
 		shared_int = FALSE;
-	else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
-			      netdev->name, netdev)) {
+	else if (pci_request_irq(adapter->pdev, &e1000_test_intr, IRQF_SHARED,
+		 		 netdev->name)) {
 		*data = 1;
 		return -1;
 	}
@@ -986,7 +985,7 @@ e1000_intr_test(struct e1000_adapter *ad
 	msleep(10);
 
 	/* Unhook test interrupt handler */
-	free_irq(irq, netdev);
+	pci_free_irq(adapter->pdev);
 
 	return *data;
 }
drivers/net/e1000/e1000_main.c +2 -8
Index: 2.6.18-mm3/drivers/net/e1000/e1000_main.c
===================================================================
@@ -296,19 +296,13 @@ static int e1000_request_irq(struct e100
 	if (adapter->have_msi)
 		flags &= ~IRQF_SHARED;
 #endif
-	if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
-	                       netdev->name, netdev)))
-		DPRINTK(PROBE, ERR,
-		        "Unable to allocate interrupt Error: %d\n", err);
-
+	err = pci_request_irq(adapter->pdev, &e1000_intr, flags, netdev->name);
 	return err;
 }
 
 static void e1000_free_irq(struct e1000_adapter *adapter)
 {
-	struct net_device *netdev = adapter->netdev;
-
-	free_irq(adapter->pdev->irq, netdev);
+	pci_free_irq(adapter->pdev);
 
 #ifdef CONFIG_PCI_MSI
 	if (adapter->have_msi)
#3 lore raw
In reply to Jeff Garzik
Quoted 16 lines

include/linux/interrupt.h struct irqaction { · line 82

Quoted 13 lines

Index: 2.6.18-mm3/include/linux/interrupt.h
===================================================================

include/linux/interrupt.h +6 -0
@@ -75,6 +75,13 @@ struct irqaction {
 	struct proc_dir_entry *dir;
 };
+#ifndef ARCH_VALIDATE_PCI_IRQ
+static inline int is_irq_valid(unsigned int irq)
+{
+	return irq ? 1 : 0;
+}
+#endif /* ARCH_VALIDATE_PCI_IRQ */

It's not appropriate to have PCI IRQ stuff in linux/interrupt.h.

Quoted 2 lines

This is precisely why I passed 'struct pci_dev *' to a PCI-specific irq validation function, and prototyped it in linux/pci.h.

My bad, I've mixed your proposal and Matthew's, isn't this just a matter of:
s/ARCH_VALIDATE_PCI_IRQ/ARCH_VALIDATE_IRQ/ ?

I'll look if there's some non-PCI code that might check the irq's value and thus might benefit from this.

Regards,
Frederik

#14 lore raw

Re: [RFC PATCH] move e1000 to pci_request_irq

In reply to Frederik Deweerdt

drivers/net/e1000/e1000_ethtool.c e1000_intr_test(struct e1000_adapter *ad · line 911

Quoted 2 lines · Frederik Deweerdt
drivers/net/e1000/e1000_ethtool.c +2 -0
+	else if (pci_request_irq(adapter->pdev, &e1000_test_intr, IRQF_SHARED,
+		 		 netdev->name)) {

doesn't need IRQF_SHARED flag anymore

#4 lore raw
In reply to Frederik Deweerdt
Quoted 6 lines · Frederik Deweerdt

My bad, I've mixed your proposal and Matthew's, isn't this just a matter of:
s/ARCH_VALIDATE_PCI_IRQ/ARCH_VALIDATE_IRQ/ ?

I'll look if there's some non-PCI code that might check the irq's value and thus might benefit from this.

The irq value comes from the PCI subsystem... The PCI subsystem should validate it.

Jeff

#8 lore raw

Re: [RFC PATCH] move tg3 to pci_request_irq

In reply to Frederik Deweerdt
Quoted 28 lines · Frederik Deweerdt

Hi,

This proof-of-concept patch converts the tg3 driver to use the pci_request_irq() function.

Please note that I'm not submitting the driver changes, they're there only for illustration purposes. I'll CC the appropriate maintainers when/if an API is agreed upon.

Regards,
Frederik

drivers/net/tg3.c +0 -0
index c25ba27..23660c6 100644

Index: 2.6.18-mm3/drivers/net/tg3.c
===================================================================

drivers/net/tg3.c +1 -1
@@ -6853,7 +6853,7 @@ static int tg3_request_irq(struct tg3 *t
 			fn = tg3_interrupt_tagged;
 		flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
 	}
-	return (request_irq(tp->pdev->irq, fn, flags, dev->name, dev));
+	return pci_request_irq(tp->pdev, fn, flags, dev->name);
 }
 
 static int tg3_test_interrupt(struct tg3 *tp)

drivers/net/tg3.c static int tg3_test_interrupt(struct tg3 · line 6872

Quoted 10 lines
drivers/net/tg3.c +3 -3
@@ -6866,10 +6866,10 @@ static int tg3_test_interrupt(struct tg3
 
 	tg3_disable_ints(tp);
 
-	free_irq(tp->pdev->irq, dev);
+	pci_free_irq(tp->pdev);
 
-	err = request_irq(tp->pdev->irq, tg3_test_isr,
-			  IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
+	err = pci_request_irq(tp->pdev, tg3_test_isr,
+			      IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name);

IRQF_SHARED flags are still left hanging around...

#9 lore raw

Re: [RFC PATCH] move tg3 to pci_request_irq

Quoted 24 lines · Jeff Garzik
Quoted 23 lines · Frederik Deweerdt

Hi,
This proof-of-concept patch converts the tg3 driver to use the pci_request_irq() function.
Please note that I'm not submitting the driver changes, they're there only for illustration purposes. I'll CC the appropriate maintainers when/if an API is agreed upon.
Regards,
Frederik diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index c25ba27..23660c6 100644
Index: 2.6.18-mm3/drivers/net/tg3.c
===================================================================

drivers/net/tg3.c +1 -1
@@ -6853,7 +6853,7 @@ static int tg3_request_irq(struct tg3 *t
 			fn = tg3_interrupt_tagged;
 		flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
 	}
-	return (request_irq(tp->pdev->irq, fn, flags, dev->name, dev));
+	return pci_request_irq(tp->pdev, fn, flags, dev->name);
 }
 static int tg3_test_interrupt(struct tg3 *tp)
@@ -6866,10 +6866,10 @@ static int tg3_test_interrupt(struct tg3
 	tg3_disable_ints(tp);
Quoted 8 lines

drivers/net/tg3.c static int tg3_test_interrupt(struct tg3 · line 6872

Quoted 6 lines
drivers/net/tg3.c +3 -3
-	free_irq(tp->pdev->irq, dev);
+	pci_free_irq(tp->pdev);
-	err = request_irq(tp->pdev->irq, tg3_test_isr,
-			  IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
+	err = pci_request_irq(tp->pdev, tg3_test_isr,
+			      IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name);

IRQF_SHARED flags are still left hanging around...

I did it on purpose (see parent post): some parts of tg3 for example don't pass IRQF_SHARED, so I though it wasn't a good idea to enforce IRQF_SHARED in all cases. Did I miss something?

Frederik

#5 lore raw
In reply to Jeff Garzik
Quoted 10 lines · Jeff Garzik
Quoted 6 lines · Frederik Deweerdt

My bad, I've mixed your proposal and Matthew's, isn't this just a matter of:
s/ARCH_VALIDATE_PCI_IRQ/ARCH_VALIDATE_IRQ/ ?

I'll look if there's some non-PCI code that might check the irq's value and thus might benefit from this.

The irq value comes from the PCI subsystem... The PCI subsystem should validate it.

That's not true. The value in the pci_dev->irq field has been changed by the architecture. See, for example, pci_read_irq_line() in arch/powerpc/kernel/pci_32.c. It's a Linux IRQ number, not a PCI IRQ number.

#10 lore raw

Re: [RFC PATCH] move tg3 to pci_request_irq

In reply to Frederik Deweerdt
Quoted 32 lines · Frederik Deweerdt
Quoted 23 lines · Jeff Garzik
Quoted 22 lines · Frederik Deweerdt

Hi,
This proof-of-concept patch converts the tg3 driver to use the pci_request_irq() function.
Please note that I'm not submitting the driver changes, they're there only for illustration purposes. I'll CC the appropriate maintainers when/if an API is agreed upon.
Regards,
Frederik diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index c25ba27..23660c6 100644
Index: 2.6.18-mm3/drivers/net/tg3.c
===================================================================

drivers/net/tg3.c +1 -1
@@ -6853,7 +6853,7 @@ static int tg3_request_irq(struct tg3 *t
 			fn = tg3_interrupt_tagged;
 		flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
 	}
-	return (request_irq(tp->pdev->irq, fn, flags, dev->name, dev));
+	return pci_request_irq(tp->pdev, fn, flags, dev->name);
 }
 static int tg3_test_interrupt(struct tg3 *tp)
@@ -6866,10 +6866,10 @@ static int tg3_test_interrupt(struct tg3
Quoted 8 lines

drivers/net/tg3.c static int tg3_test_interrupt(struct tg3 · line 6872

Quoted 7 lines
drivers/net/tg3.c +3 -3
 	tg3_disable_ints(tp);
-	free_irq(tp->pdev->irq, dev);
+	pci_free_irq(tp->pdev);
-	err = request_irq(tp->pdev->irq, tg3_test_isr,
-			  IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
+	err = pci_request_irq(tp->pdev, tg3_test_isr,
+			      IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name);

IRQF_SHARED flags are still left hanging around...

Quoted 3 lines

I did it on purpose (see parent post): some parts of tg3 for example don't pass IRQF_SHARED, so I though it wasn't a good idea to enforce IRQF_SHARED in all cases. Did I miss something?

When it's hardcoded into the definition of pci_request_irq(), then setting the flag in the above code is logically superfluous.

As for why the flag may be missing -- PCI MSI interrupts are never shared. However, it won't _hurt_ anything to set the flag needlessly, AFAIK.

Jeff

maintainer
#11 lore raw

Re: [RFC PATCH] move tg3 to pci_request_irq

From: Jeff Garzik <[email protected]>
Date: Wed, 04 Oct 2006 01:38:31 -0400

Quoted 3 lines

As for why the flag may be missing -- PCI MSI interrupts are never shared. However, it won't _hurt_ anything to set the flag needlessly, AFAIK.

That's right.

#12 lore raw

Re: [RFC PATCH] move tg3 to pci_request_irq

Quoted 8 lines · David Miller

From: Jeff Garzik <[email protected]>
Date: Wed, 04 Oct 2006 01:38:31 -0400

Quoted 3 lines

As for why the flag may be missing -- PCI MSI interrupts are never shared. However, it won't _hurt_ anything to set the flag needlessly, AFAIK.

That's right.

Just to make sure I understood: does this means that the code at lines 296 and 297 in e1000_main.c can be safely removed?

296 if (adapter->have_msi)
297 flags &= ~IRQF_SHARED;
298 #endif
299 if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
300 netdev->name, netdev)))

Quoted 6 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/