uboot-1.1.4 linux-2.6.10: Image bootproblems
Hello,
i have ported uboot1.1.4 for my board.
When i would like to boot linux-kernel-2.6.10 the system hang after decompressing. can anybody help me?
Flash: 0x00000000 uboot
0x00020000 ubootenvironment
0x00040000 kernel uImageuImage: gzip -9 < zImage > Image.gz
/elinux/kernel2.6Richard/Richard/linux-2.6.10/scripts/mkuboot.sh
-A arm -O linux -T kernel -C gzip -a 0xa0008000 -e 0xa0008000 -n
'Linux-2.6.10' -d Image.gz uImageU-BOOT output:
RAM Configuration:
Bank #0: a0000000 32 MB
Flash #0: 00000000 16 MB
In: serial Out: serial Err: serial Hit any key to stop autoboot: 1 uboot==> bootm 0x00040000 ## Booting image at 00040000 ... Image Name: Linux-2.6.10 Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 756009 Bytes = 738.3 kB
Load Address: a0008000
Entry Point: a0008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Uncompressing Linux................................................... done, booting the kernel.
69052D06:0000001B:00001078 #Kernel-Debug-Information
A00DC914-A0259594>A0008000
A0259594
Signature · 2 lines
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
Quoted 5 lines · In message <[email protected]> you wrote:
uboot==> bootm
0x00040000
## Booting image at 00040000 ...
Image Name: Linux-2.6.10
Image Type: ARM Linux Kernel Image (gzip compressed)
You are off topic here. This is the PowerPC list.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] You see things; and you say ``Why?'' But I dream things that never were; and I say ``Why not?'' - George Bernard Shaw _Back to Methuselah_ (1921) pt. 1, act 1