Skip to contentSkip to conversation

UART driver for PNX8xxx: header fixup

PATCH New Vitaly Wool 1 participant 1 message Oct 6, 2006 TTY layer and serial drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 UART driver for PNX8xxx: header fixup

Hello Andrew,

inlined below is the patch that fixes the compilation breakage for the PNX8xxx platform caused by the incorrect serial header.

This patch fixes UART headers for PNX8330/8550/8950 Philips MIPS-based SoCs.

 include/linux/serial_core.h    |    2 -
 include/linux/serial_ip3106.h  |   81 -----------------------------------------
 include/linux/serial_pnx8xxx.h |   81 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+), 82 deletions(-)
include/linux/serial_ip3106.h deleted +0 -81
Index: linux-2.6.18/include/linux/serial_ip3106.h
===================================================================
@@ -1,81 +0,0 @@
-/*
- * Embedded Alley Solutions, [email protected].
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _LINUX_SERIAL_IP3106_H
-#define _LINUX_SERIAL_IP3106_H
-
-#include <linux/serial_core.h>
-#include <linux/device.h>
-
-#define IP3106_NR_PORTS		2
-
-struct ip3106_port {
-	struct uart_port	port;
-	struct timer_list	timer;
-	unsigned int		old_status;
-};
-
-/* register offsets */
-#define IP3106_LCR		0
-#define IP3106_MCR		0x004
-#define IP3106_BAUD		0x008
-#define IP3106_CFG		0x00c
-#define IP3106_FIFO		0x028
-#define IP3106_ISTAT		0xfe0
-#define IP3106_IEN		0xfe4
-#define IP3106_ICLR		0xfe8
-#define IP3106_ISET		0xfec
-#define IP3106_PD		0xff4
-#define IP3106_MID		0xffc
-
-#define IP3106_UART_LCR_TXBREAK		(1<<30)
-#define IP3106_UART_LCR_PAREVN		0x10000000
-#define IP3106_UART_LCR_PAREN		0x08000000
-#define IP3106_UART_LCR_2STOPB		0x04000000
-#define IP3106_UART_LCR_8BIT		0x01000000
-#define IP3106_UART_LCR_TX_RST		0x00040000
-#define IP3106_UART_LCR_RX_RST		0x00020000
-#define IP3106_UART_LCR_RX_NEXT		0x00010000
-
-#define IP3106_UART_MCR_SCR		0xFF000000
-#define IP3106_UART_MCR_DCD		0x00800000
-#define IP3106_UART_MCR_CTS		0x00100000
-#define IP3106_UART_MCR_LOOP		0x00000010
-#define IP3106_UART_MCR_RTS		0x00000002
-#define IP3106_UART_MCR_DTR		0x00000001
-
-#define IP3106_UART_INT_TX		0x00000080
-#define IP3106_UART_INT_EMPTY		0x00000040
-#define IP3106_UART_INT_RCVTO		0x00000020
-#define IP3106_UART_INT_RX		0x00000010
-#define IP3106_UART_INT_RXOVRN		0x00000008
-#define IP3106_UART_INT_FRERR		0x00000004
-#define IP3106_UART_INT_BREAK		0x00000002
-#define IP3106_UART_INT_PARITY		0x00000001
-#define IP3106_UART_INT_ALLRX		0x0000003F
-#define IP3106_UART_INT_ALLTX		0x000000C0
-
-#define IP3106_UART_FIFO_TXFIFO		0x001F0000
-#define IP3106_UART_FIFO_TXFIFO_STA	(0x1f<<16)
-#define IP3106_UART_FIFO_RXBRK		0x00008000
-#define IP3106_UART_FIFO_RXFE		0x00004000
-#define IP3106_UART_FIFO_RXPAR		0x00002000
-#define IP3106_UART_FIFO_RXFIFO		0x00001F00
-#define IP3106_UART_FIFO_RBRTHR		0x000000FF
-
-#endif
include/linux/serial_pnx8xxx.h new file +81 -0

81 lines not on this page · raw message

include/linux/serial_core.h +1 -1
Index: linux-2.6.18/include/linux/serial_core.h
===================================================================
@@ -122,7 +122,7 @@
 /*Digi jsm */
 #define PORT_JSM        69
 
-#define PORT_IP3106	70
+#define PORT_PNX8XXX	70
 
 /* Hilscher netx */
 #define PORT_NETX	71