CPU Loading
****Apologies if I have posted at the wrong mailing list *****
Hi,
I need some help in understanding the impact of cpu loading and
multimedia characteristics. My current system is Pentium4, HT, 1GB Ram; i am also using LInux 2.6.18.1 kernel (vanilla). For stressing the cpu, I am using interbench which run a loop using asm volatile identifier and the multimedia player I am using is mplayer.
Here are my steps:
1. Fire Interbench in the background. Using top I see that the CPU
utlization is 99.1%.
2. Fire mplayer with Interbench running.
Both of them have equal priority.
However, I am NOT seeing any impact of loading the cpu on the performance of mplyaer (i.e no dropped frames, lack of synchronization,...).
How can I load the CPU such that the scheduling time slice is insuffucent for mplayer to playout the video? To the mplayer the system thus appears "slow" ?
Thanks,
IM
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 3 lines · Indian Mogul
How can I load the CPU such that the scheduling time slice is insuffucent for mplayer to playout the video? To the mplayer the system thus appears "slow" ?
:) unusual request.
The proglet below, which someone posted a while back, should meet your needs nicely. Fire up a few copies in the background with args like 5000 6000 7000 8000 9000.., and mplayer should become decidedly unhappy.
The scheduler round robin schedules tasks which it has classified as interactive (tasks which sleep somewhat regularly basically) at a higher rate than their timeslice to reduce latency, but the more tasks circulating at the same priority (or above) as mplayer, the bigger the latency hit mplayer will take.
-Mike
#include <stdlib.h>
#include <unistd.h>
static void burn_cpu(unsigned int x)
{
static char buf[1024];
int i;
for (i=0; i < x; ++i)
buf[i%sizeof(buf)] = (x-i)*3;
}int main(int argc, char **argv)
{
unsigned long burn;
if (argc != 2)
return 1;
burn = (unsigned long)atoi(argv[1]);
while(1) {
burn_cpu(burn*1000);
usleep(1);
}
return 0;
}Thanks for the code snippet.. One more question. I want to load the cpu with x% load & take measurements. For eg, cpu_burn <x> should load the CPU
with x% occupancy.. Is there a way this could be
done? Any program / pointers greatly appreciated..
Thanks,
IM
Quoted 43 lines · --- Mike Galbraith
Quoted 1 line · Indian Mogul
How can I load the CPU such that the scheduling
time
Quoted 1 line
slice is insuffucent for mplayer to playout the
video?
Quoted 1 line
To the mplayer the system thus appears "slow" ?
:) unusual request.
The proglet below, which someone posted a while
back, should meet your
needs nicely. Fire up a few copies in the
background with args like
5000 6000 7000 8000 9000.., and mplayer should
become decidedly unhappy.The scheduler round robin schedules tasks which it has classified as
interactive (tasks which sleep somewhat regularly basically) at a higher
rate than their timeslice to reduce latency, but the more tasks
circulating at the same priority (or above) as mplayer, the bigger the
latency hit mplayer will take.-Mike
#include <
stdlib.h>
#include <unistd.h>static void
burn_cpu(unsigned int x){ static char buf[1024]; int i; for (i=0; i < x; ++i) buf[i%sizeof(buf)] = (x-i)*3; }int
main(int argc, char **argv)
Quoted 16 lines
{
unsigned long burn;
if (argc != 2)
return 1;
burn = (unsigned long)atoi(argv[1]);
while(1) {
burn_cpu(burn*1000);
usleep(1);
}
return 0;
}____________________________________________________________________________________
Low, Low, Low Rates! Check out Yahoo! Messenger's cheap PC-to-Phone call rates
(http://voice.yahoo.com)