Excessive output from snd-bt-sco in dmesg
I have my suspicions this could be something to do with a problem that is causing audio output to my headset to go completely silent on random occaisions (usually a 'killall -USR2 btsco' fixes it, but in extreme cases I have had to unload the module and reload it).
From dmesg, repeated nearly 1500 times:
snd-bt-sco: Shift problem detected! Fixing to 1.
snd-bt-sco: Shift problem detected! Fixing to 0.
And occaisionally this message (or some variation on the number of files):
snd-bt-sco: file_count is 4 (expected 3)
Headset is a Sony Ericsson HBH-IV835
BD Address: 00:18:13:7e:bc:7a
Device Name: HBH-IV835
LMP Version: 2.0 (0x3) LMP Subversion: 0xe1b
Manufacturer: Texas Instruments Inc. (13)
Features: 0xff 0xfd 0x29 0x78 0x18 0x18 0x00 0x80
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <transparent SCO> <enhanced iscan> <interlaced iscan> <interlaced pscan> <inquiry with RSSI> <AFH cap. slave> <AFH class. slave> <AFH cap. master> <AFH class. master> <extended features>
Adapter is 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
hci0: Type: USB
BD Address: 00:02:72:B0:36:D7 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN
RX bytes:21511295 acl:351 sco:420012 events:8971 errors:0 TX bytes:21398439 acl:305 sco:418646 commands:7868 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'insanity'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing, Object Transfer,
Audio
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x110 LMP Ver: 1.1 (0x1) LMP Subver: 0x110
Manufacturer: Cambridge Silicon Radio (10)
Since 99% of the time there is no problem that needs to be solved, is there a simple way to just reduce the verbosity of output to the system log?
--Thomas
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Thomas Kear wrote (Sat 2006-Oct-28 14:31:41 +1300):
Quoted 3 lines
From dmesg, repeated nearly 1500 times:
snd-bt-sco: Shift problem detected! Fixing to 1.
snd-bt-sco: Shift problem detected! Fixing to 0.
..
Quoted 1 line
Since 99% of the time there is no problem that needs to be solved, is the=
re a =
Quoted 1 line
simple way to just reduce the verbosity of output to the system log?
This has been working just fine for me:
mcg@coach:/usr/src/modules/bluetooth-alsa$ diff -u btsco.c_ORIG btsco.c
--- btsco.c_ORIG 2006-04-13 21:50:23.000000000 +0200
+++ btsco.c 2006-08-23 20:57:32.000000000 +0200
@@ -1016,7 +1016,7 @@
#ifdef AUTO_FIXUP_BYTESHIFT
if (lostatcnt=3D=3Dlen/2&&len>32) {
shift=3D!shift;
- dprintk("Shift problem detected! Fixing=
to %d.\n",shift);
+ //dprintk("Shift problem detected! Fixi=
ng to %d.\n",shift);
}
#endif
#endif /* any of them */Cheers, Marcus
-- =
Marcus C. Gottwald =B7 http://www.inf.fu-berlin.de/~gottwald/
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easi= er
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users