Palm Tungsten|T support
Subsystems (4)
PATCH 1/3 Palm Tungsten|T support
Hi,
this patch adds board file and necessary includes for Palm Tungsten|T.
Short description of device:
PalmTT is omap1510 @ 144MHz based device with 16megs of ram, 8meg flash from amd, 320x320x16bpp lcd, touchscreen based on ads7846, bcm2033 bluetooth, irda, aic23 as soundchip and weird mmc connected over mcbsp.
arch/arm/mach-omap1/board-palmtt.c +363 -0
@@ -0,0 +1,363 @@ +/* +* linux/arch/arm/mach-omap1/board-palmtt.c +* +* Modified from board-palmtt2.c +* +* Modified and amended for Palm Tungsten|T +* by Marek Vasut <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/notifier.h> +#include <linux/clk.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/mcbsp.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/dma.h> +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/irda.h> +#include <asm/arch/keypad.h> +#include <asm/arch/common.h> +#include <asm/arch/omap-alsa.h> + +#include <linux/input.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +static int palmtt_keymap[] = { +KEY (0 ,0 ,KEY_ESC ), +KEY (0 ,1 ,KEY_SPACE ), +KEY (0 ,2 ,KEY_LEFTCTRL ), +KEY (0 ,3 ,KEY_TAB ), +KEY (0 ,4 ,KEY_ENTER ), +KEY (1 ,0 ,KEY_LEFT ), +KEY (1 ,1 ,KEY_DOWN ), +KEY (1 ,2 ,KEY_UP ), +KEY (1 ,3 ,KEY_RIGHT ), +KEY (2 ,0 ,KEY_SLEEP ), +KEY (2 ,4 ,KEY_Y ), +0 +}; + +static struct mtd_partition palmtt_partitions[] = { + { + .name ="write8k" , + .offset =0 , + .size =SZ_8K , + .mask_flags =0 , + }, + { + .name ="PalmOS-BootLoader(ro)" , + .offset =SZ_8K , + .size =7 *SZ_8K , + .mask_flags =MTD_WRITEABLE , + }, + { + .name ="u-boot" , + .offset =MTDPART_OFS_APPEND , + .size =8 *SZ_8K , + .mask_flags =0 , + }, + { + .name ="PalmOS-FS(ro)" , + .offset =MTDPART_OFS_APPEND , + .size =7 *SZ_1M +4 *SZ_64K -16 *SZ_8K , + .mask_flags =MTD_WRITEABLE , + }, + { + .name ="u-boot(rez)" , + .offset =MTDPART_OFS_APPEND , + .size =SZ_128K , + .mask_flags =0 + }, + { + .name ="empty" , + .offset =MTDPART_OFS_APPEND , + .size =MTDPART_SIZ_FULL , + .mask_flags =0 + } +}; + +static struct flash_platform_data palmtt_flash_data = { + .map_name ="cfi_probe" , + .width =2 , + .parts = palmtt_partitions, + .nr_parts =ARRAY_SIZE (palmtt_partitions), +}; + +static struct resource palmtt_flash_resource = { + .start =OMAP_CS0_PHYS , + .end =OMAP_CS0_PHYS +SZ_8M -1 , + .flags =IORESOURCE_MEM , +}; + +static struct platform_device palmtt_flash_device = { + .name ="omapflash" , + .id =0 , + .dev = { + .platform_data = &palmtt_flash_data, + }, + .num_resources =1 , + .resource = &palmtt_flash_resource, +}; + +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 =FREE |FRST |GRST |XRST |XINTM (3 ), + .spcr1 =RINTM (3 ) |RRST , + .rcr2 =RPHASE |RFRLEN2 (OMAP_MCBSP_WORD_8 ) | +RWDLEN2 (OMAP_MCBSP_WORD_16 ) |RDATDLY (0 ), + .rcr1 =RFRLEN1 (OMAP_MCBSP_WORD_8 ) |RWDLEN1 (OMAP_MCBSP_WORD_16 ), + .xcr2 =XPHASE |XFRLEN2 (OMAP_MCBSP_WORD_8 ) | +XWDLEN2 (OMAP_MCBSP_WORD_16 ) |XDATDLY (0 ) |XFIG , + .xcr1 =XFRLEN1 (OMAP_MCBSP_WORD_8 ) |XWDLEN1 (OMAP_MCBSP_WORD_16 ), + .srgr1 =FWID (DEFAULT_BITPERSAMPLE -1 ), + .srgr2 =GSYNC |CLKSP |FSGM |FPER (DEFAULT_BITPERSAMPLE *2 -1 ), +/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ + .pcr0 =CLKXP |CLKRP ,/* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name ="PalmTT AIC23" , + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev =NULL ,// aic23_configure, + .codec_set_samplerate =NULL ,// aic23_set_samplerate, + .codec_clock_setup =NULL ,// aic23_clock_setup, + .codec_clock_on =NULL ,// aic23_clock_on, + .codec_clock_off =NULL ,// aic23_clock_off, + .get_default_samplerate =NULL ,// aic23_get_default_samplerate, +}; + +static struct platform_device palmtt_mcbsp1_device = { + .name ="omap_alsa_mcbsp" , + .id =1 , + .dev = { + .platform_data = &alsa_config, + }, +}; + +static struct resource palmtt_kp_resources[] = { + [0 ] = { + .start =INT_KEYBOARD , + .end =INT_KEYBOARD , + .flags =IORESOURCE_IRQ , + }, +}; + +static struct omap_kp_platform_data palmtt_kp_data = { + .rows =6 , + .cols =3 , + .keymap = palmtt_keymap, +}; + +static struct platform_device palmtt_kp_device = { + .name ="omap-keypad" , + .id =-1 , + .dev = { + .platform_data = &palmtt_kp_data, + }, + .num_resources =ARRAY_SIZE (palmtt_kp_resources), + .resource = palmtt_kp_resources, +}; + +static struct platform_device palmtt_lcd_device = { + .name ="lcd_palmtt" , + .id =-1 , +}; +static struct omap_irda_config palmtt_irda_config = { + .transceiver_cap =IR_SIRMODE , + .rx_channel =OMAP_DMA_UART3_RX , + .tx_channel =OMAP_DMA_UART3_TX , + .dest_start =UART3_THR , + .src_start =UART3_RHR , + .tx_trigger =0 , + .rx_trigger =0 , +}; + +static struct resource palmtt_irda_resources[] = { + [0 ] = { + .start =INT_UART3 , + .end =INT_UART3 , + .flags =IORESOURCE_IRQ , + }, +}; + +static struct platform_device palmtt_irda_device = { + .name ="omapirda" , + .id =-1 , + .dev = { + .platform_data = &palmtt_irda_config, + }, + .num_resources =ARRAY_SIZE (palmtt_irda_resources), + .resource = palmtt_irda_resources, +}; + +static struct platform_device palmtt_spi_device = { + .name ="spi_palmtt" , + .id =-1 , +}; + +static struct omap_backlight_config palmtt_backlight_config = { + .default_intensity =0xa0 , + }; + +static struct platform_device palmtt_backlight_device = { + .name ="omap-bl" , + .id =-1 , + .dev = { + .platform_data = &palmtt_backlight_config, + }, +}; + + +static struct platform_device *palmtt_devices[]__initdata = { + &palmtt_flash_device, + &palmtt_mcbsp1_device, + &palmtt_kp_device, + &palmtt_lcd_device, + &palmtt_irda_device, + &palmtt_spi_device, + &palmtt_backlight_device, +}; +static int palmtt_get_pendown_state (void ) +{ +return !omap_get_gpio_datain (6 ); +} + +static const struct ads7846_platform_data palmtt_ts_info = { + .model =7846 , + .vref_delay_usecs =100 ,/* internal, no capacitor */ + .x_plate_ohms =419 , + .y_plate_ohms =486 , + .get_pendown_state = palmtt_get_pendown_state, +}; + +static struct spi_board_info __initdata palmtt_boardinfo[] = { { +/* MicroWire (bus 2) CS0 has an ads7846e */ + .modalias ="ads7846" , + .platform_data = &palmtt_ts_info, + .irq =OMAP_GPIO_IRQ (6 ), + .max_speed_hz =120000 /* max sample rate at 3V */ + *26 /* command + data + overhead */ , + .bus_num =2 , + .chip_select =0 , +} }; + +//static int __initdata palmtt_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; + +static void __init omap_palmtt_init_irq (void ) +{ +omap1_init_common_hw (); +omap_init_irq (); +} + +static struct omap_usb_config palmtt_usb_config__initdata = { + .register_dev =1 , + .hmc_mode =0 , + .pins[0 ] =2 , +}; + +static struct omap_lcd_config palmtt_lcd_config__initdata = { + .ctrl_name ="internal" , +}; + +static struct omap_uart_config palmtt_uart_config__initdata = { + .enabled_uarts = (1 <<0 ) | (1 <<1 ) | (0 <<2 ), +}; + +static struct omap_board_config_kernel palmtt_config[] = { + {OMAP_TAG_USB , &palmtt_usb_config }, + {OMAP_TAG_LCD , &palmtt_lcd_config }, + {OMAP_TAG_UART , &palmtt_uart_config }, +}; +/*should be fixed soon*/ +/*static irqreturn_t +palmtt_powercable(int irq, void *dev_id, struct pt_regs *regs) +{ +if (omap_get_gpio_datain(PALMTT_USBDETECT_GPIO)) { +printk(KERN_INFO "PM: USB cable connected (charging)\n"); +set_irq_type(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), IRQT_FALLING); +} else { +printk(KERN_INFO "PM: USB cable disconnected\n"); +set_irq_type(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), IRQT_RISING); +} +return IRQ_HANDLED; +}*/ + +static void __init omap_mpu_wdt_mode (int mode) { +if (mode) +omap_writew (0x8000 ,OMAP_WDT_TIMER_MODE ); +else { +omap_writew (0x00f5 ,OMAP_WDT_TIMER_MODE ); +omap_writew (0x00a0 ,OMAP_WDT_TIMER_MODE ); + } +} +/*needs to be fixed, this will be simple*/ +/*static void __init palmtt_gpio_setup(int early) +{ +if (early) { +omap_set_gpio_dataout(1,1); +omap_set_gpio_direction(1,0); +} else { +if (omap_request_gpio(PALMTT_USBDETECT_GPIO)) { +printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); +return; +} +omap_set_gpio_direction(PALMTT_USBDETECT_GPIO, 1); +if (request_irq(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), palmtt_powercable, +SA_SAMPLE_RANDOM, "palmtt-cable", 0)) +printk(KERN_ERR "IRQ request for power cable failed!\n"); +palmtt_powercable(OMAP_GPIO_IRQ(PALMTT_USBDETECT_GPIO), 0, 0); +} +}*/ + +static void __init omap_palmtt_init (void ) +{ +// palmtt_gpio_setup(1); +omap_mpu_wdt_mode (0 ); + + omap_board_config = palmtt_config; + omap_board_config_size =ARRAY_SIZE (palmtt_config); + +platform_add_devices (palmtt_devices,ARRAY_SIZE (palmtt_devices)); + +spi_register_board_info (palmtt_boardinfo,ARRAY_SIZE (palmtt_boardinfo)); +omap_serial_init (); +// palmtt_gpio_setup(0); +} + +static void __init omap_palmtt_map_io (void ) +{ +omap1_map_common_io (); +} + +MACHINE_START (OMAP_PALMTT ,"PalmTT" ) + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_palmtt_map_io, + .init_irq = omap_palmtt_init_irq, + .init_machine = omap_palmtt_init, + .timer = &omap_timer, +MACHINE_END
arch/arm/mach-omap1/Kconfig +9 -0
@@ -98,6 +98,15 @@ http://hackndev.com/palm/z71 for more informations. Say Y here if you have such a PDA, say N otherwise. +config MACH_OMAP_PALMTT + bool "Palm Tungsten|T" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Palm Tungsten|T PDA. To boot the kernel, you'll + need a PalmOS compatible bootloader (Garux); check out + http://www.hackndev.com/palm/tt/ for more information. + Say Y here if you have this PDA model, say N otherwise. + config MACH_NOKIA770 bool "Nokia 770" depends on ARCH_OMAP1 && ARCH_OMAP16XX
arch/arm/mach-omap1/Makefile +1 -0
@@ -26,6 +26,7 @@ obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o +obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o
include/asm-arm/arch-omap/board-palmtt.h +22 -0
@@ -0,0 +1,22 @@ +/* +* linux/include/asm-arm/arch-omap/board-palmte.h +* +* Hardware definitions for the Palm Tungsten|T device. +* +* Maintainters : Marek Vasut <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __OMAP_BOARD_PALMTT_H +#define __OMAP_BOARD_PALMTT_H + +#define PALMTT_USBDETECT_GPIO 0 +#define PALMTT_CABLE_GPIO 1 +#define PALMTT_PINTDAV_GPIO 6 +#define PALMTT_MMC_WP_GPIO 8 +#define PALMTT_HDQ_GPIO 11 + +#endif /* __OMAP_BOARD_PALMTT_H */
include/asm-arm/arch-omap/hardware.h +4 -0
@@ -338,6 +338,10 @@#include "board-palmz71.h" #endif +#ifdef CONFIG_MACH_OMAP_PALMTT +#include "board-palmtt.h" +#endif +#endif /* !__ASSEMBLER__ */ #endif /* __ASM_ARCH_OMAP_HARDWARE_H */
PATCH 2/3 Palm Tungsten|T LCD
Hi,
this patch adds LCD support for Palm Tungsten|T.
drivers/video/omap/lcd_palmtt.c +129 -0
@@ -0,0 +1,129 @@ +/* +* File: drivers/video/omap/lcd_palmtt.c +* +* LCD panel support for Palm Tungsten|T +* Current version : Marek Vasut <[email protected]> +* +* Modified from lcd_inn1510.c +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* This program is distributed in the hope that it will be useful, but +* WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* General Public License for more details. +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +*/ + +/* +GPIO11 - backlight +GPIO12 - screen blanking +GPIO13 - screen blanking +*/ + +#include <linux/platform_device.h> +#include <linux/module.h> + +#include <asm/io.h> + +#include <asm/arch/gpio.h> +#include "asm/arch/omapfb.h" + +static int palmtt_panel_init (struct lcd_panel *panel, +struct omapfb_device *fbdev) +{ +return 0 ; +} + +static void palmtt_panel_cleanup (struct lcd_panel *panel) +{ +} + +static int palmtt_panel_enable (struct lcd_panel *panel) +{ +return 0 ; +} + +static void palmtt_panel_disable (struct lcd_panel *panel) +{ +} + +static unsigned long palmtt_panel_get_caps (struct lcd_panel *panel) +{ +return OMAPFB_CAPS_SET_BACKLIGHT ; +} + +struct lcd_panel palmtt_panel = { + .name ="palmtt" , + .config =OMAP_LCDC_PANEL_TFT |OMAP_LCDC_INV_VSYNC |OMAP_LCDC_INV_HSYNC |OMAP_LCDC_HSVS_RISING_EDGE |OMAP_LCDC_HSVS_OPPOSITE , + .bpp =16 , + .data_lines =16 , + .x_res =320 , + .y_res =320 , + .pixel_clock =10000 , + .hsw =4 , + .hfp =8 , + .hbp =28 , + .vsw =1 , + .vfp =8 , + .vbp =7 , + .pcd =0 , + + .init = palmtt_panel_init, + .cleanup = palmtt_panel_cleanup, + .enable = palmtt_panel_enable, + .disable = palmtt_panel_disable, + .get_caps= palmtt_panel_get_caps, +}; + +static int palmtt_panel_probe (struct platform_device *pdev) +{ +omapfb_register_panel (&palmtt_panel); +return 0 ; +} + +static int palmtt_panel_remove (struct platform_device *pdev) +{ +return 0 ; +} + +static int palmtt_panel_suspend (struct platform_device *pdev,pm_message_t mesg) +{ +return 0 ; +} + +static int palmtt_panel_resume (struct platform_device *pdev) +{ +return 0 ; +} + +struct platform_driver palmtt_panel_driver = { + .probe = palmtt_panel_probe, + .remove = palmtt_panel_remove, + .suspend = palmtt_panel_suspend, + .resume = palmtt_panel_resume, + .driver = { + .name ="lcd_palmtt" , + .owner =THIS_MODULE , + }, +}; + +static int palmtt_panel_drv_init (void ) +{ +return platform_driver_register (&palmtt_panel_driver); +} + +static void palmtt_panel_drv_cleanup (void ) +{ +platform_driver_unregister (&palmtt_panel_driver); +} + +module_init (palmtt_panel_drv_init); +module_exit (palmtt_panel_drv_cleanup); +
drivers/video/omap/Makefile +1 -0
@@ -20,6 +20,7 @@ objs-y$(CONFIG_MACH_OMAP_H2) += lcd_h2.o objs-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o +objs-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
Hi,
yes, both of the previous. MMC support is not in these cuz MMC is somehow busted in current git. Those previous ones were quite dirty and big, so I made new up-to-date ones - these three.
BR
Marek
Dne neděle 29 říjen 2006 20:39 jste napsal(a):
Quoted 16 lines
Quoted 1 line · Marek Vašut
this patch adds board file and necessary includes for Palm Tungsten|T.
Does this patchset replace
http://linux.omap.com/pipermail/linux-omap-open-source/2006-October/008106.
htmland/or
http://linux.omap.com/pipermail/linux-omap-open-source/2006-October/008120.
html?
Dirk