Skip to contentSkip to conversation

V4L/DVB fixes

PATCH New [email protected] 1 participant 8 messages Nov 3, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover V4L/DVB fixes

Linus,

Please pull 'master' from:
git://git.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git master

It contains the following:

- Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel
- DVB: Add DVB_FE_CUSTOMISE support for MT2060
Those two patches fixes the known regression at dvb, related to breakage of building system, on some unusual config selections.

- Pvrusb2: use NULL instead of 0
This fixes compilation warnings

- Budget-ci: Change DEBIADDR_IR to a safer default
- Budget-ci: Inversion setting fixed for Technotrend 1500 T
- Fix mode switch of Compro Videomate T300
- [saa7146_i2c] short_delay mode fixed for fast machines Those fixes some troubles for some specific boards.

Cheers,
Mauro.

V4L/DVB development is hosted at http://linuxtv.org
---

 drivers/media/common/saa7146_i2c.c                |   10 ++++------
 drivers/media/dvb/dvb-usb/Kconfig                 |   12 ++++++------
 drivers/media/dvb/frontends/Kconfig               |    2 ++
 drivers/media/dvb/frontends/bcm3510.h             |    2 +-
 drivers/media/dvb/frontends/cx22700.h             |    2 +-
 drivers/media/dvb/frontends/cx22702.h             |    2 +-
 drivers/media/dvb/frontends/cx24110.h             |    2 +-
 drivers/media/dvb/frontends/cx24123.h             |    2 +-
 drivers/media/dvb/frontends/dib3000.h             |    2 +-
 drivers/media/dvb/frontends/dib3000mc.h           |    2 +-
 drivers/media/dvb/frontends/isl6421.h             |    2 +-
 drivers/media/dvb/frontends/l64781.h              |    2 +-
 drivers/media/dvb/frontends/lgdt330x.h            |    2 +-
 drivers/media/dvb/frontends/lnbp21.h              |    2 +-
 drivers/media/dvb/frontends/mt2060.h              |    8 ++++++++
 drivers/media/dvb/frontends/mt312.h               |    2 +-
 drivers/media/dvb/frontends/mt352.h               |    2 +-
 drivers/media/dvb/frontends/nxt200x.h             |    2 +-
 drivers/media/dvb/frontends/nxt6000.h             |    2 +-
 drivers/media/dvb/frontends/or51132.h             |    2 +-
 drivers/media/dvb/frontends/or51211.h             |    2 +-
 drivers/media/dvb/frontends/s5h1420.h             |    2 +-
 drivers/media/dvb/frontends/sp8870.h              |    2 +-
 drivers/media/dvb/frontends/sp887x.h              |    2 +-
 drivers/media/dvb/frontends/stv0297.h             |    2 +-
 drivers/media/dvb/frontends/stv0299.h             |    2 +-
 drivers/media/dvb/frontends/tda10021.h            |    2 +-
 drivers/media/dvb/frontends/tda1004x.h            |    2 +-
 drivers/media/dvb/frontends/tda10086.h            |    2 +-
 drivers/media/dvb/frontends/tda8083.h             |    2 +-
 drivers/media/dvb/frontends/tda826x.h             |    2 +-
 drivers/media/dvb/frontends/tua6100.h             |    2 +-
 drivers/media/dvb/frontends/ves1820.h             |    2 +-
 drivers/media/dvb/frontends/ves1x93.h             |    2 +-
 drivers/media/dvb/frontends/zl10353.h             |    2 +-
 drivers/media/dvb/ttpci/budget-ci.c               |   10 +++++++++-
 drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c |    2 +-
 drivers/media/video/pvrusb2/pvrusb2-v4l2.c        |    6 +++---
 drivers/media/video/saa7134/saa7134-dvb.c         |    2 ++
 39 files changed, 66 insertions(+), 48 deletions(-)
#1 lore raw

PATCH 1/7 V4L/DVB (4752): DVB: Add DVB_FE_CUSTOMISE support for MT2060

From: Trent Piepho <[email protected]>

Let the MT2060 be customized like most of the other DVB PLLs/front-ends. Also, add a missing dependency on I2C.

---

 drivers/media/dvb/dvb-usb/Kconfig    |   12 ++++++------
 drivers/media/dvb/frontends/Kconfig  |    2 ++
 drivers/media/dvb/frontends/mt2060.h |    8 ++++++++
 3 files changed, 16 insertions(+), 6 deletions(-)
drivers/media/dvb/dvb-usb/Kconfig +6 -6
index 2cc5caa..a263b3f 100644
@@ -26,7 +26,7 @@ config DVB_USB_A800
 	tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
 
@@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB
 	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
 	depends on DVB_USB
 	select DVB_DIB3000MB
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC
 	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Support for USB2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -70,7 +70,7 @@ config DVB_USB_DIB0700
 	tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
 	  USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -87,7 +87,7 @@ config DVB_USB_UMT_010
 	tristate "HanfTek UMT-010 DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
@@ -153,7 +153,7 @@ config DVB_USB_NOVA_T_USB2
 	tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
 
drivers/media/dvb/frontends/Kconfig +2 -0
index 080fa25..aebb8d6 100644
@@ -276,6 +276,8 @@ config DVB_TDA826X
 
 config DVB_TUNER_MT2060
 	tristate "Microtune MT2060 silicon IF tuner"
+	depends on I2C
+	default m if DVB_FE_CUSTOMISE
 	help
 	  A driver for the silicon IF tuner MT2060 from Microtune.
 
drivers/media/dvb/frontends/mt2060.h +8 -0
index 34a37c2..0a86eab 100644
@@ -30,6 +30,14 @@ struct mt2060_config {
 	u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */
 };
 
+#if defined(CONFIG_DVB_TUNER_MT2060) || (defined(CONFIG_DVB_TUNER_MT2060_MODULE) && defined(MODULE))
 extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
+#else
+static inline struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+	return NULL;
+}
+#endif // CONFIG_DVB_TUNER_MT2060
 
 #endif
#2 lore raw

PATCH 2/7 V4L/DVB (4785): Budget-ci: Change DEBIADDR_IR to a safer default

In reply to [email protected]

From: David H�rdeman <[email protected]>

The IR chip has no address decoding, so the IR data is always present in the high byte when doing a read from the saa7146 chip. This means that the DEBI address used is irrelevant to the IR decoding logic. DEBI addresses 0x1XXX are mapped to the registers on the CI module itself, but only the lowest two bits are actually used (see EN50221, section A.2.2.1), meaning that 0x1234 is equivalent to 0x1000 which maps to register 0 (the data register). A read from the data register is supposed to be preceded by a read from the size register, so some CI modules will be confused (the AlphaCrypt CAM will hang completely). The attached patch changes the address used when reading the IR data to use 0x4000 instead. This is the CI version address, which is a safer default, works with the AlphaCrypt CAM and matches the behaviour of the Windows driver (AFAIK).

---

 drivers/media/dvb/ttpci/budget-ci.c |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletions(-)
drivers/media/dvb/ttpci/budget-ci.c +8 -1
index 2a2e9b4..ac0cecb 100644
@@ -46,7 +46,14 @@ #include "lnbp21.h"
 #include "bsbe1.h"
 #include "bsru6.h"
 
-#define DEBIADDR_IR		0x1234
+/*
+ * Regarding DEBIADDR_IR:
+ * Some CI modules hang if random addresses are read.
+ * Using address 0x4000 for the IR read means that we
+ * use the same address as for CI version, which should
+ * be a safe default.
+ */
+#define DEBIADDR_IR		0x4000
 #define DEBIADDR_CICONTROL	0x0000
 #define DEBIADDR_CIVERSION	0x4000
 #define DEBIADDR_IO		0x1000
#3 lore raw

PATCH 3/7 V4L/DVB (4786): Pvrusb2: use NULL instead of 0

In reply to [email protected]

From: Randy Dunlap <[email protected]>

Fix sparse NULL usage warnings:
drivers/media/video/pvrusb2/pvrusb2-v4l2.c:714:14: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-v4l2.c:715:16: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-v4l2.c:1079:10: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c:224:58: warning: Using plain integer as NULL pointer

---

 drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c |    2 +-
 drivers/media/video/pvrusb2/pvrusb2-v4l2.c        |    6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +1 -1
index df8feac..c80c26b 100644
@@ -221,7 +221,7 @@ static unsigned int decoder_describe(str
 static void decoder_reset(struct pvr2_v4l_cx2584x *ctxt)
 {
 	int ret;
-	ret = pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_RESET,0);
+	ret = pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_RESET,NULL);
 	pvr2_trace(PVR2_TRACE_CHIPS,"i2c cx25840 decoder_reset (ret=%d)",ret);
 }
 
drivers/media/video/pvrusb2/pvrusb2-v4l2.c +3 -3
index 97e974d..bb40e90 100644
@@ -711,8 +711,8 @@ static void pvr2_v4l2_dev_destroy(struct
 	       dip->devbase.minor,pvr2_config_get_name(dip->config));
 
 	/* Paranoia */
-	dip->v4lp = 0;
-	dip->stream = 0;
+	dip->v4lp = NULL;
+	dip->stream = NULL;
 
 	/* Actual deallocation happens later when all internal references
 	   are gone. */
@@ -1076,7 +1076,7 @@ struct pvr2_v4l2 *pvr2_v4l2_create(struc
 	vp->vdev = kmalloc(sizeof(*vp->vdev),GFP_KERNEL);
 	if (!vp->vdev) {
 		kfree(vp);
-		return 0;
+		return NULL;
 	}
 	memset(vp->vdev,0,sizeof(*vp->vdev));
 	pvr2_channel_init(&vp->channel,mnp);
#4 lore raw

PATCH 4/7 V4L/DVB (4787): Budget-ci: Inversion setting fixed for Technotrend 1500 T

In reply to [email protected]

From: Raymond Mantchala <[email protected]>

Technotrend 1500 T card have "inverted inversion". This patch fixes that. Many thanks to Martin Zwickel from Technotrend for his confirmation and correction proposal.

---

 drivers/media/dvb/ttpci/budget-ci.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/media/dvb/ttpci/budget-ci.c +1 -0
index ac0cecb..cd5ec48 100644
@@ -1035,6 +1035,7 @@ static void frontend_init(struct budget_
 
 	case 0x1012:		// TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
 		budget_ci->tuner_pll_address = 0x60;
+		philips_tdm1316l_config.invert = 1;
 		budget_ci->budget.dvb_frontend =
 			dvb_attach(tda10046_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
 		if (budget_ci->budget.dvb_frontend) {
#5 lore raw

PATCH 5/7 V4L/DVB (4770): Fix mode switch of Compro Videomate T300

In reply to [email protected]

From: Hartmut Hackmann <[email protected]>

The board did not return to analog mode since the board specific "demod sleep" function was not called.

---

 drivers/media/video/saa7134/saa7134-dvb.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/media/video/saa7134/saa7134-dvb.c +2 -0
index 1ba53b5..6b61d9b 100644
@@ -1147,6 +1147,8 @@ static int dvb_init(struct saa7134_dev *
 					       &philips_europa_config,
 					       &dev->i2c_adap);
 		if (dev->dvb.frontend) {
+			dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
+			dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
 			dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
 			dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
 			dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
#6 lore raw

PATCH 6/7 V4L/DVB (4784): [saa7146_i2c] short_delay mode fixed for fast machines

In reply to [email protected]

From: Oliver Endriss <[email protected]>

TT DVB-C 2300 runs at 137 kHz I2C speed. short_delay mode did not work reliably on fast machines with that speed. Increased max loop count from 20 to 50. Moved dummy access out of the loop.

---

 drivers/media/common/saa7146_i2c.c |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)
drivers/media/common/saa7146_i2c.c +4 -6
index d9953f7..5297a36 100644
@@ -217,11 +217,9 @@ static int saa7146_i2c_writeout(struct s
 		}
 		/* wait until we get a transfer done or error */
 		timeout = jiffies + HZ/100 + 1; /* 10ms */
+		/* first read usually delivers bogus results... */
+		saa7146_i2c_status(dev);
 		while(1) {
-			/**
-			 *  first read usually delivers bogus results...
-			 */
-			saa7146_i2c_status(dev);
 			status = saa7146_i2c_status(dev);
 			if ((status & 0x3) != 1)
 				break;
@@ -232,10 +230,10 @@ static int saa7146_i2c_writeout(struct s
 				DEB_I2C(("saa7146_i2c_writeout: timed out waiting for end of xfer\n"));
 				return -EIO;
 			}
-			if ((++trial < 20) && short_delay)
+			if (++trial < 50 && short_delay)
 				udelay(10);
 			else
-			msleep(1);
+				msleep(1);
 		}
 	}
 
#7 lore raw

PATCH 7/7 V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel

In reply to [email protected]

From: Trent Piepho <[email protected]>

When a front-end is disabled, card drivers that use it are compiled with a stub version of the front-end's attach function. This way they have no references to the front-end's code and don't need it to be loaded. If a card driver is compiled into the kernel, and a front-end is a module, then that front-end is effectively disabled wrt the card driver. In this case, the card driver should get the stub version. This was not happening.
The stub vs real attach function selection is changed so that when the front-end is a module the real attach function is only used if the card driver is a module as well. This means a module front-end will be supported by card drivers that are modules and not supported by card drivers compiled into the kernel.

---

 drivers/media/dvb/frontends/bcm3510.h   |    2 +-
 drivers/media/dvb/frontends/cx22700.h   |    2 +-
 drivers/media/dvb/frontends/cx22702.h   |    2 +-
 drivers/media/dvb/frontends/cx24110.h   |    2 +-
 drivers/media/dvb/frontends/cx24123.h   |    2 +-
 drivers/media/dvb/frontends/dib3000.h   |    2 +-
 drivers/media/dvb/frontends/dib3000mc.h |    2 +-
 drivers/media/dvb/frontends/isl6421.h   |    2 +-
 drivers/media/dvb/frontends/l64781.h    |    2 +-
 drivers/media/dvb/frontends/lgdt330x.h  |    2 +-
 drivers/media/dvb/frontends/lnbp21.h    |    2 +-
 drivers/media/dvb/frontends/mt312.h     |    2 +-
 drivers/media/dvb/frontends/mt352.h     |    2 +-
 drivers/media/dvb/frontends/nxt200x.h   |    2 +-
 drivers/media/dvb/frontends/nxt6000.h   |    2 +-
 drivers/media/dvb/frontends/or51132.h   |    2 +-
 drivers/media/dvb/frontends/or51211.h   |    2 +-
 drivers/media/dvb/frontends/s5h1420.h   |    2 +-
 drivers/media/dvb/frontends/sp8870.h    |    2 +-
 drivers/media/dvb/frontends/sp887x.h    |    2 +-
 drivers/media/dvb/frontends/stv0297.h   |    2 +-
 drivers/media/dvb/frontends/stv0299.h   |    2 +-
 drivers/media/dvb/frontends/tda10021.h  |    2 +-
 drivers/media/dvb/frontends/tda1004x.h  |    2 +-
 drivers/media/dvb/frontends/tda10086.h  |    2 +-
 drivers/media/dvb/frontends/tda8083.h   |    2 +-
 drivers/media/dvb/frontends/tda826x.h   |    2 +-
 drivers/media/dvb/frontends/tua6100.h   |    2 +-
 drivers/media/dvb/frontends/ves1820.h   |    2 +-
 drivers/media/dvb/frontends/ves1x93.h   |    2 +-
 drivers/media/dvb/frontends/zl10353.h   |    2 +-
 31 files changed, 31 insertions(+), 31 deletions(-)
drivers/media/dvb/frontends/bcm3510.h +1 -1
index 6dfa839..7e4f95e 100644
@@ -34,7 +34,7 @@ struct bcm3510_config
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
-#if defined(CONFIG_DVB_BCM3510) || defined(CONFIG_DVB_BCM3510_MODULE)
+#if defined(CONFIG_DVB_BCM3510) || (defined(CONFIG_DVB_BCM3510_MODULE) && defined(MODULE))
 extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/cx22700.h +1 -1
index 10286cc..7ac3369 100644
@@ -31,7 +31,7 @@ struct cx22700_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_CX22700) || defined(CONFIG_DVB_CX22700_MODULE)
+#if defined(CONFIG_DVB_CX22700) || (defined(CONFIG_DVB_CX22700_MODULE) && defined(MODULE))
 extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/cx22702.h +1 -1
index bc217dd..9cd64da 100644
@@ -41,7 +41,7 @@ #define CX22702_SERIAL_OUTPUT   1
 	u8 output_mode;
 };
 
-#if defined(CONFIG_DVB_CX22702) || defined(CONFIG_DVB_CX22702_MODULE)
+#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) && defined(MODULE))
 extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/cx24110.h +1 -1
index c9d5ae2..0ca3af4 100644
@@ -41,7 +41,7 @@ static inline int cx24110_pll_write(stru
 	return r;
 }
 
-#if defined(CONFIG_DVB_CX24110) || defined(CONFIG_DVB_CX24110_MODULE)
+#if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE))
 extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/cx24123.h +1 -1
index 57a1dae..84f9e4f 100644
@@ -35,7 +35,7 @@ struct cx24123_config
 	int lnb_polarity;
 };
 
-#if defined(CONFIG_DVB_CX24123) || defined(CONFIG_DVB_CX24123_MODULE)
+#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) && defined(MODULE))
 extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/dib3000.h +1 -1
index 0caac3f..a6d3854 100644
@@ -41,7 +41,7 @@ struct dib_fe_xfer_ops
 	int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl);
 };
 
-#if defined(CONFIG_DVB_DIB3000MB) || defined(CONFIG_DVB_DIB3000MB_MODULE)
+#if defined(CONFIG_DVB_DIB3000MB) || (defined(CONFIG_DVB_DIB3000MB_MODULE) && defined(MODULE))
 extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
 					     struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops);
 #else
drivers/media/dvb/frontends/dib3000mc.h +1 -1
index 0d6fdef..72d4757 100644
@@ -39,7 +39,7 @@ struct dib3000mc_config {
 #define DEFAULT_DIB3000MC_I2C_ADDRESS 16
 #define DEFAULT_DIB3000P_I2C_ADDRESS  24
 
-#if defined(CONFIG_DVB_DIB3000MC) || defined(CONFIG_DVB_DIB3000MC_MODULE)
+#if defined(CONFIG_DVB_DIB3000MC) || (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE))
 extern struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg);
 #else
 static inline struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg)
drivers/media/dvb/frontends/isl6421.h +1 -1
index 1916e3e..ea7f78a 100644
@@ -39,7 +39,7 @@ #define ISL6421_ENT1	0x10
 #define ISL6421_ISEL1	0x20
 #define ISL6421_DCL	0x40
 
-#if defined(CONFIG_DVB_ISL6421) || defined(CONFIG_DVB_ISL6421_MODULE)
+#if defined(CONFIG_DVB_ISL6421) || (defined(CONFIG_DVB_ISL6421_MODULE) && defined(MODULE))
 /* override_set and override_clear control which system register bits (above) to always set & clear */
 extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
 			  u8 override_set, u8 override_clear);
drivers/media/dvb/frontends/l64781.h +1 -1
index 21ba4a2..cd15f76 100644
@@ -31,7 +31,7 @@ struct l64781_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_L64781) || defined(CONFIG_DVB_L64781_MODULE)
+#if defined(CONFIG_DVB_L64781) || (defined(CONFIG_DVB_L64781_MODULE) && defined(MODULE))
 extern struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 					  struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/lgdt330x.h +1 -1
index 3f96b48..9950590 100644
@@ -52,7 +52,7 @@ struct lgdt330x_config
 	int clock_polarity_flip;
 };
 
-#if defined(CONFIG_DVB_LGDT330X) || defined(CONFIG_DVB_LGDT330X_MODULE)
+#if defined(CONFIG_DVB_LGDT330X) || (defined(CONFIG_DVB_LGDT330X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
 					    struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/lnbp21.h +1 -1
index 1fe1dd1..68906ac 100644
@@ -39,7 +39,7 @@ #define LNBP21_PCL	0x80
 
 #include <linux/dvb/frontend.h>
 
-#if defined(CONFIG_DVB_LNBP21) || defined(CONFIG_DVB_LNBP21_MODULE)
+#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) && defined(MODULE))
 /* override_set and override_clear control which system register bits (above) to always set & clear */
 extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear);
 #else
drivers/media/dvb/frontends/mt312.h +1 -1
index 7112fb4..cf9a150 100644
@@ -34,7 +34,7 @@ struct mt312_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_MT312) || defined(CONFIG_DVB_MT312_MODULE)
+#if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE))
 struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
 					struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/mt352.h +1 -1
index 0035c2e..e996408 100644
@@ -51,7 +51,7 @@ struct mt352_config
 	int (*demod_init)(struct dvb_frontend* fe);
 };
 
-#if defined(CONFIG_DVB_MT352) || defined(CONFIG_DVB_MT352_MODULE)
+#if defined(CONFIG_DVB_MT352) || (defined(CONFIG_DVB_MT352_MODULE) && defined(MODULE))
 extern struct dvb_frontend* mt352_attach(const struct mt352_config* config,
 					 struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/nxt200x.h +1 -1
index 2eb220e..28bc559 100644
@@ -45,7 +45,7 @@ struct nxt200x_config
 	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
 };
 
-#if defined(CONFIG_DVB_NXT200X) || defined(CONFIG_DVB_NXT200X_MODULE)
+#if defined(CONFIG_DVB_NXT200X) || (defined(CONFIG_DVB_NXT200X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/nxt6000.h +1 -1
index 9397393..13d2251 100644
@@ -33,7 +33,7 @@ struct nxt6000_config
 	u8 clock_inversion:1;
 };
 
-#if defined(CONFIG_DVB_NXT6000) || defined(CONFIG_DVB_NXT6000_MODULE)
+#if defined(CONFIG_DVB_NXT6000) || (defined(CONFIG_DVB_NXT6000_MODULE) && defined(MODULE))
 extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/or51132.h +1 -1
index 9718be4..add24f0 100644
@@ -34,7 +34,7 @@ struct or51132_config
 	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
 };
 
-#if defined(CONFIG_DVB_OR51132) || defined(CONFIG_DVB_OR51132_MODULE)
+#if defined(CONFIG_DVB_OR51132) || (defined(CONFIG_DVB_OR51132_MODULE) && defined(MODULE))
 extern struct dvb_frontend* or51132_attach(const struct or51132_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/or51211.h +1 -1
index 10a5419..8aad840 100644
@@ -37,7 +37,7 @@ struct or51211_config
 	void (*sleep)(struct dvb_frontend * fe);
 };
 
-#if defined(CONFIG_DVB_OR51211) || defined(CONFIG_DVB_OR51211_MODULE)
+#if defined(CONFIG_DVB_OR51211) || (defined(CONFIG_DVB_OR51211_MODULE) && defined(MODULE))
 extern struct dvb_frontend* or51211_attach(const struct or51211_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/s5h1420.h +1 -1
index efc54d7..1555870 100644
@@ -34,7 +34,7 @@ struct s5h1420_config
 	u8 invert:1;
 };
 
-#if defined(CONFIG_DVB_S5H1420) || defined(CONFIG_DVB_S5H1420_MODULE)
+#if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE))
 extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
 	     struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/sp8870.h +1 -1
index 4cf27d3..909cefe 100644
@@ -35,7 +35,7 @@ struct sp8870_config
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
-#if defined(CONFIG_DVB_SP8870) || defined(CONFIG_DVB_SP8870_MODULE)
+#if defined(CONFIG_DVB_SP8870) || (defined(CONFIG_DVB_SP8870_MODULE) && defined(MODULE))
 extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
 					  struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/sp887x.h +1 -1
index cab7ea6..7ee78d7 100644
@@ -17,7 +17,7 @@ struct sp887x_config
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
-#if defined(CONFIG_DVB_SP887X) || defined(CONFIG_DVB_SP887X_MODULE)
+#if defined(CONFIG_DVB_SP887X) || (defined(CONFIG_DVB_SP887X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
 					  struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/stv0297.h +1 -1
index 760b80d..69f4515 100644
@@ -42,7 +42,7 @@ struct stv0297_config
 	u8 stop_during_read:1;
 };
 
-#if defined(CONFIG_DVB_STV0297) || defined(CONFIG_DVB_STV0297_MODULE)
+#if defined(CONFIG_DVB_STV0297) || (defined(CONFIG_DVB_STV0297_MODULE) && defined(MODULE))
 extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/stv0299.h +1 -1
index 7ef2520..33df949 100644
@@ -89,7 +89,7 @@ struct stv0299_config
 	int (*set_symbol_rate)(struct dvb_frontend* fe, u32 srate, u32 ratio);
 };
 
-#if defined(CONFIG_DVB_STV0299) || defined(CONFIG_DVB_STV0299_MODULE)
+#if defined(CONFIG_DVB_STV0299) || (defined(CONFIG_DVB_STV0299_MODULE) && defined(MODULE))
 extern struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/tda10021.h +1 -1
index d68ae20..e3da780 100644
@@ -32,7 +32,7 @@ struct tda10021_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_TDA10021) || defined(CONFIG_DVB_TDA10021_MODULE)
+#if defined(CONFIG_DVB_TDA10021) || (defined(CONFIG_DVB_TDA10021_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda10021_attach(const struct tda10021_config* config,
 					    struct i2c_adapter* i2c, u8 pwm);
 #else
drivers/media/dvb/frontends/tda1004x.h +1 -1
index e28fca0..605ad2d 100644
@@ -71,7 +71,7 @@ struct tda1004x_config
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
-#if defined(CONFIG_DVB_TDA1004X) || defined(CONFIG_DVB_TDA1004X_MODULE)
+#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
 					    struct i2c_adapter* i2c);
 
drivers/media/dvb/frontends/tda10086.h +1 -1
index 18457ad..ed584a8 100644
@@ -35,7 +35,7 @@ struct tda10086_config
 	u8 invert;
 };
 
-#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE)
+#if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
 					    struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/tda8083.h +1 -1
index aae15bd..2d33079 100644
@@ -35,7 +35,7 @@ struct tda8083_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_TDA8083) || defined(CONFIG_DVB_TDA8083_MODULE)
+#if defined(CONFIG_DVB_TDA8083) || (defined(CONFIG_DVB_TDA8083_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/tda826x.h +1 -1
index 83998c0..ad99811 100644
@@ -35,7 +35,7 @@ #include "dvb_frontend.h"
  * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector.
  * @return FE pointer on success, NULL on failure.
  */
-#if defined(CONFIG_DVB_TDA826X) || defined(CONFIG_DVB_TDA826X_MODULE)
+#if defined(CONFIG_DVB_TDA826X) || (defined(CONFIG_DVB_TDA826X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr,
 					   struct i2c_adapter *i2c,
 					   int has_loopthrough);
drivers/media/dvb/frontends/tua6100.h +1 -1
index 8f98033..03a665e 100644
@@ -34,7 +34,7 @@ #define __DVB_TUA6100_H__
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 
-#if defined(CONFIG_DVB_TUA6100) || defined(CONFIG_DVB_TUA6100_MODULE)
+#if defined(CONFIG_DVB_TUA6100) || (defined(CONFIG_DVB_TUA6100_MODULE) && defined(MODULE))
 extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c);
 #else
 static inline struct dvb_frontend* tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c)
drivers/media/dvb/frontends/ves1820.h +1 -1
index f0c9dde..e4a2a32 100644
@@ -41,7 +41,7 @@ struct ves1820_config
 	u8 selagc:1;
 };
 
-#if defined(CONFIG_DVB_VES1820) || defined(CONFIG_DVB_VES1820_MODULE)
+#if defined(CONFIG_DVB_VES1820) || (defined(CONFIG_DVB_VES1820_MODULE) && defined(MODULE))
 extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
 					   struct i2c_adapter* i2c, u8 pwm);
 #else
drivers/media/dvb/frontends/ves1x93.h +1 -1
index 395fed3..d507f89 100644
@@ -40,7 +40,7 @@ struct ves1x93_config
 	u8 invert_pwm:1;
 };
 
-#if defined(CONFIG_DVB_VES1X93) || defined(CONFIG_DVB_VES1X93_MODULE)
+#if defined(CONFIG_DVB_VES1X93) || (defined(CONFIG_DVB_VES1X93_MODULE) && defined(MODULE))
 extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
 					   struct i2c_adapter* i2c);
 #else
drivers/media/dvb/frontends/zl10353.h +1 -1
index 79a9472..0bc0109 100644
@@ -36,7 +36,7 @@ struct zl10353_config
 	int parallel_ts;
 };
 
-#if defined(CONFIG_DVB_ZL10353) || defined(CONFIG_DVB_ZL10353_MODULE)
+#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
 extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
 					   struct i2c_adapter *i2c);
 #else