2.6.19-rc5: where can I select INPUT?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Neither in menuconfig nor in xconfig do I see any place to actually select INPUT. Help text suggests that it is a) selectable b) it can be made modules. I do not have either option. Here what I see in menuconfig if I go into Input device support:
--- Generic input layer (needed for keyboard, mouse, ...)
< > Support for memoryless force-feedback devices
--- Userland interfaces
as you see there is no check box for INPUT itself.
I already had similar issue something else (I believe it was something related to serio). In menuconfig item was no selectable, but I could directly edit .config to change y to m.
This may be related to
Symbol: INPUT [=y]
Prompt: Generic input layer (needed for keyboard, mouse, ...)
Defined at drivers/input/Kconfig:7
Depends on: EMBEDDED
Location:
-> Device Drivers
-> Input device support
Selected by: VT
and CONFIG_VT is indeed y (I do not think this even can ever be m). Still even then this is way too confusing.
.config can be provided on request
- -andrey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFVaT+R6LMutpd94wRAlwlAJ9RduOcCi3u00p/BsY/GoP2Xs4IgACfV6lp YqEaBKJ1DY5OK5TIEsH2iP4=
=kBNh
-----END PGP SIGNATURE-----
Quoted 8 lines · Andrey Borzenkov
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Neither in menuconfig nor in xconfig do I see any place to actually select INPUT. Help text suggests that it is a) selectable b) it can be made modules. I do not have either option. Here what I see in menuconfig if I go into Input device support:
Quoted 5 lines
--- Generic input layer (needed for keyboard, mouse, ...)
< > Support for memoryless force-feedback devices
--- Userland interfacesas you see there is no check box for INPUT itself.
... snip ...
somewhat off-topic, but when one has questions about oddities in the configuration process, is it more appropriate to ask on *this* list, or on the kbuild-devel list?
only two minutes ago, i posted this kind of question to kbuild-devel, but now i'm wondering if i sent it to the wrong place. thoughts?
rday
Quoted 12 lines · Andrey Borzenkov
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Neither in menuconfig nor in xconfig do I see any place to actually select INPUT. Help text suggests that it is a) selectable b) it can be made modules. I do not have either option. Here what I see in menuconfig if I go into Input device support:
--- Generic input layer (needed for keyboard, mouse, ...)
< > Support for memoryless force-feedback devices
--- Userland interfaces
Quoted 6 lines
as you see there is no check box for INPUT itself.
I already had similar issue something else (I believe it was something related to serio). In menuconfig item was no selectable, but I could directly edit .config to change y to m.
...
INPUT can only be unset if you set CONFIG_EMBEDDED=y.
The rationale is that it usually doesn't make sense for users to disable INPUT, and allowing it tends to cause some confusion.
Quoted 1 line
- -andrey
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 13 lines · Adrian Bunk
Quoted 12 lines · Andrey Borzenkov
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Neither in menuconfig nor in xconfig do I see any place to actually select INPUT. Help text suggests that it is a) selectable b) it can be made modules. I do not have either option. Here what I see in menuconfig if I go into Input device support:
--- Generic input layer (needed for keyboard, mouse, ...)
< > Support for memoryless force-feedback devices
--- Userland interfaces
Quoted 9 lines
Quoted 6 lines
as you see there is no check box for INPUT itself.
I already had similar issue something else (I believe it was something related to serio). In menuconfig item was no selectable, but I could directly edit .config to change y to m.
...INPUT can only be unset if you set
CONFIG_EMBEDDED=y.
{pts/1}% grep EMB /boot/configCONFIG_EMBEDDED=y
Quoted 3 lines
The rationale is that it usually doesn't make sense for users to disable INPUT, and allowing it tends to cause some confusion.
I do not want to disable it. I want to make it module (OK it has the same rationale - if you need it anyway why you do want to make it module etc). This should be possible according to help text. It does not work. Direct editing of .config silently reverts it back to y instead of m.
TIA
- -andrey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFVb+iR6LMutpd94wRAtq+AJ0aMam9gJKSCN4PEbVKTEX7aijibgCfbB4/ 7yVO9PFy9mQgpU4v2yieaUc=
=WNXy
-----END PGP SIGNATURE-----
Quoted 8 lines · Andrey Borzenkov
Quoted 2 lines · Adrian Bunk
The rationale is that it usually doesn't make sense for users to disable INPUT, and allowing it tends to cause some confusion.
I do not want to disable it. I want to make it module (OK it has the same rationale - if you need it anyway why you do want to make it module etc). This should be possible according to help text. It does not work. Direct editing of .config silently reverts it back to y instead of m.
Welcome to the wonderful world of the 'select' kconfig statement.
config VT
bool "Virtual terminal" if EMBEDDED
select INPUT
default y if !VIOCONS
This means if VT is selected, INPUT has to be 'y'.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core
Quoted 26 lines · Andrey Borzenkov
Quoted 11 lines · Adrian Bunk
Quoted 10 lines · Andrey Borzenkov
Neither in menuconfig nor in xconfig do I see any place to actually select INPUT. Help text suggests that it is a) selectable b) it can be made modules. I do not have either option. Here what I see in menuconfig if I go into Input device support:
--- Generic input layer (needed for keyboard, mouse, ...)
< > Support for memoryless force-feedback devices
--- Userland interfacesQuoted 9 lines
Quoted 6 lines
as you see there is no check box for INPUT itself.
I already had similar issue something else (I believe it was something related to serio). In menuconfig item was no selectable, but I could directly edit .config to change y to m.
...INPUT can only be unset if you set
CONFIG_EMBEDDED=y.{pts/1}% grep EMB
/boot/configCONFIG_EMBEDDED=y
Quoted 8 lines
Quoted 3 lines
The rationale is that it usually doesn't make sense for users to disable INPUT, and allowing it tends to cause some confusion.
I do not want to disable it. I want to make it module (OK it has the same rationale - if you need it anyway why you do want to make it module etc). This should be possible according to help text. It does not work. Direct editing of .config silently reverts it back to y instead of m.
What you want seems to require some non-trivial changes.
Are you trying this "just because it should work" or is there a strong technical reason why you need it?
Quoted 2 lines
TIA
- -andrey
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 32 lines · Adrian Bunk
Quoted 23 lines · Andrey Borzenkov
Quoted 10 lines · Adrian Bunk
Quoted 9 lines · Andrey Borzenkov
Neither in menuconfig nor in xconfig do I see any place to actually select INPUT. Help text suggests that it is a) selectable b) it can be made modules. I do not have either option. Here what I see in menuconfig if I go into Input device support:
--- Generic input layer (needed for keyboard, mouse, ...)
< > Support for memoryless force-feedback devices
--- Userland interfacesQuoted 8 lines
Quoted 6 lines
as you see there is no check box for INPUT itself.
I already had similar issue something else (I believe it was something related to serio). In menuconfig item was no selectable, but I could directly edit .config to change y to m.
...INPUT can only be unset if you set
CONFIG_EMBEDDED=y.{pts/1}% grep EMB
/boot/configCONFIG_EMBEDDED=yQuoted 7 lines
Quoted 2 lines
The rationale is that it usually doesn't make sense for users to disable INPUT, and allowing it tends to cause some confusion.
I do not want to disable it. I want to make it module (OK it has the same rationale - if you need it anyway why you do want to make it module etc). This should be possible according to help text. It does not work. Direct editing of .config silently reverts it back to y instead of m.
Quoted 5 lines
What you want seems to require some non-trivial changes.
Are you trying this "just because it should work" or is there a strong technical reason why you need it?
No, I do not have any compelling technical reason; I was just going via more or less permanent .config cleanup round and was surprised why it did not work because it did work before (but it was really long ago, I guess in late 2.5 times). When I tried it last time I was mostly driven by attempt to minimize kernel size so it fitted for floppy boot. Since then it became less interesting (it is probably won't fit anymore and distribution I use dropped floppy boot support anyway).
Thank you (and Russel) for explanation and sorry if it was too trivial question.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFVwhcR6LMutpd94wRAkddAJ0aJls5N7/LXnCPBt34EOlXiDXaVgCgiSx7 RNd079+8bvlJ/UdXN5DiDw0=
=mEtn
-----END PGP SIGNATURE-----