ARM: OMAP: Palm Tungsten|T support
Subsystems (3)
PATCH 2/4 ARM: OMAP: Palm Tungsten|T support
Hi,
this patch adds board file and necessary includes for Palm Tungsten|T.
Signed-off-by Marek Vašut <[email protected]>
arch/arm/mach-omap1/board-palmtt.c +357 -0
@@ -0,0 +1,357 @@ +/* +* linux/arch/arm/mach-omap1/board-palmtt.c +* +* Modified from board-palmtt2.c +* +* Modified and amended for Palm Tungsten|T +* by Marek Vasut <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/notifier.h> +#include <linux/clk.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/leds.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/led.h> +#include <asm/arch/mcbsp.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/dma.h> +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/irda.h> +#include <asm/arch/keypad.h> +#include <asm/arch/common.h> +#include <asm/arch/omap-alsa.h> + +#include <linux/input.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +static int palmtt_keymap[] = { +KEY (0 ,0 ,KEY_ESC ), +KEY (0 ,1 ,KEY_SPACE ), +KEY (0 ,2 ,KEY_LEFTCTRL ), +KEY (0 ,3 ,KEY_TAB ), +KEY (0 ,4 ,KEY_ENTER ), +KEY (1 ,0 ,KEY_LEFT ), +KEY (1 ,1 ,KEY_DOWN ), +KEY (1 ,2 ,KEY_UP ), +KEY (1 ,3 ,KEY_RIGHT ), +KEY (2 ,0 ,KEY_SLEEP ), +KEY (2 ,4 ,KEY_Y ), +0 +}; + +static struct mtd_partition palmtt_partitions[] = { + { + .name ="write8k" , + .offset =0 , + .size =SZ_8K , + .mask_flags =0 , + }, + { + .name ="PalmOS-BootLoader(ro)" , + .offset =SZ_8K , + .size =7 *SZ_8K , + .mask_flags =MTD_WRITEABLE , + }, + { + .name ="u-boot" , + .offset =MTDPART_OFS_APPEND , + .size =8 *SZ_8K , + .mask_flags =0 , + }, + { + .name ="PalmOS-FS(ro)" , + .offset =MTDPART_OFS_APPEND , + .size =7 *SZ_1M +4 *SZ_64K -16 *SZ_8K , + .mask_flags =MTD_WRITEABLE , + }, + { + .name ="u-boot(rez)" , + .offset =MTDPART_OFS_APPEND , + .size =SZ_128K , + .mask_flags =0 + }, + { + .name ="empty" , + .offset =MTDPART_OFS_APPEND , + .size =MTDPART_SIZ_FULL , + .mask_flags =0 + } +}; + +static struct flash_platform_data palmtt_flash_data = { + .map_name ="cfi_probe" , + .width =2 , + .parts = palmtt_partitions, + .nr_parts =ARRAY_SIZE (palmtt_partitions), +}; + +static struct resource palmtt_flash_resource = { + .start =OMAP_CS0_PHYS , + .end =OMAP_CS0_PHYS +SZ_8M -1 , + .flags =IORESOURCE_MEM , +}; + +static struct platform_device palmtt_flash_device = { + .name ="omapflash" , + .id =0 , + .dev = { + .platform_data = &palmtt_flash_data, + }, + .num_resources =1 , + .resource = &palmtt_flash_resource, +}; + +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 =FREE |FRST |GRST |XRST |XINTM (3 ), + .spcr1 =RINTM (3 ) |RRST , + .rcr2 =RPHASE |RFRLEN2 (OMAP_MCBSP_WORD_8 ) | +RWDLEN2 (OMAP_MCBSP_WORD_16 ) |RDATDLY (0 ), + .rcr1 =RFRLEN1 (OMAP_MCBSP_WORD_8 ) | +RWDLEN1 (OMAP_MCBSP_WORD_16 ), + .xcr2 =XPHASE |XFRLEN2 (OMAP_MCBSP_WORD_8 ) | +XWDLEN2 (OMAP_MCBSP_WORD_16 ) |XDATDLY (0 ) |XFIG , + .xcr1 =XFRLEN1 (OMAP_MCBSP_WORD_8 ) | +XWDLEN1 (OMAP_MCBSP_WORD_16 ), + .srgr1 =FWID (DEFAULT_BITPERSAMPLE -1 ), + .srgr2 =GSYNC |CLKSP |FSGM | +FPER (DEFAULT_BITPERSAMPLE *2 -1 ), + .pcr0 =CLKXP |CLKRP ,/* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name ="PalmTT AIC23" , + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev =NULL ,// aic23_configure, + .codec_set_samplerate =NULL ,// aic23_set_samplerate, + .codec_clock_setup =NULL ,// aic23_clock_setup, + .codec_clock_on =NULL ,// aic23_clock_on, + .codec_clock_off =NULL ,// aic23_clock_off, + .get_default_samplerate =NULL ,// aic23_get_default_samplerate, +}; + +static struct platform_device palmtt_mcbsp1_device = { + .name ="omap_alsa_mcbsp" , + .id =1 , + .dev = { + .platform_data = &alsa_config, + }, +}; + +static struct resource palmtt_kp_resources[] = { + [0 ] = { + .start =INT_KEYBOARD , + .end =INT_KEYBOARD , + .flags =IORESOURCE_IRQ , + }, +}; + +static struct omap_kp_platform_data palmtt_kp_data = { + .rows =6 , + .cols =3 , + .keymap = palmtt_keymap, +}; + +static struct platform_device palmtt_kp_device = { + .name ="omap-keypad" , + .id =-1 , + .dev = { + .platform_data = &palmtt_kp_data, + }, + .num_resources =ARRAY_SIZE (palmtt_kp_resources), + .resource = palmtt_kp_resources, +}; + +static struct platform_device palmtt_lcd_device = { + .name ="lcd_palmtt" , + .id =-1 , +}; +static struct omap_irda_config palmtt_irda_config = { + .transceiver_cap =IR_SIRMODE , + .rx_channel =OMAP_DMA_UART3_RX , + .tx_channel =OMAP_DMA_UART3_TX , + .dest_start =UART3_THR , + .src_start =UART3_RHR , + .tx_trigger =0 , + .rx_trigger =0 , +}; + +static struct resource palmtt_irda_resources[] = { + [0 ] = { + .start =INT_UART3 , + .end =INT_UART3 , + .flags =IORESOURCE_IRQ , + }, +}; + +static struct platform_device palmtt_irda_device = { + .name ="omapirda" , + .id =-1 , + .dev = { + .platform_data = &palmtt_irda_config, + }, + .num_resources =ARRAY_SIZE (palmtt_irda_resources), + .resource = palmtt_irda_resources, +}; + +static struct platform_device palmtt_spi_device = { + .name ="spi_palmtt" , + .id =-1 , +}; + +static struct omap_backlight_config palmtt_backlight_config = { + .default_intensity =0xa0 , +}; + +static struct platform_device palmtt_backlight_device = { + .name ="omap-bl" , + .id =-1 , + .dev = { + .platform_data= &palmtt_backlight_config, + }, +}; + +static struct omap_led_config palmtt_led_config[] = { + { + .cdev = { + .name ="palmtt:led0" , + }, + .gpio =PALMTT_LED_GPIO , + }, +}; + +static struct omap_led_platform_data palmtt_led_data = { + .nr_leds =ARRAY_SIZE (palmtt_led_config), + .leds = palmtt_led_config, +}; + +static struct platform_device palmtt_led_device = { + .name ="omap-led" , + .id =-1 , + .dev = { + .platform_data = &palmtt_led_data, + }, +}; + +static struct platform_device *palmtt_devices[]__initdata = { + &palmtt_flash_device, + &palmtt_mcbsp1_device, + &palmtt_kp_device, + &palmtt_lcd_device, + &palmtt_irda_device, + &palmtt_spi_device, + &palmtt_backlight_device, + &palmtt_led_device, +}; + +static int palmtt_get_pendown_state (void ) +{ +return !omap_get_gpio_datain (6 ); +} + +static const struct ads7846_platform_data palmtt_ts_info = { + .model =7846 , + .vref_delay_usecs =100 ,/* internal, no capacitor */ + .x_plate_ohms =419 , + .y_plate_ohms =486 , + .get_pendown_state = palmtt_get_pendown_state, +}; + +static struct spi_board_info __initdata palmtt_boardinfo[] = { + { +/* MicroWire (bus 2) CS0 has an ads7846e */ + .modalias ="ads7846" , + .platform_data = &palmtt_ts_info, + .irq =OMAP_GPIO_IRQ (6 ), + .max_speed_hz =120000 /* max sample rate at 3V */ + *26 /* command + data + overhead */ , + .bus_num =2 , + .chip_select =0 , + } +}; + +static void __init omap_palmtt_init_irq (void ) +{ +omap1_init_common_hw (); +omap_init_irq (); +} + +static struct omap_usb_config palmtt_usb_config__initdata = { + .register_dev =1 , + .hmc_mode =0 , + .pins[0 ] =2 , +}; + +static struct omap_lcd_config palmtt_lcd_config__initdata = { + .ctrl_name ="internal" , +}; + +static struct omap_uart_config palmtt_uart_config__initdata = { + .enabled_uarts = (1 <<0 ) | (1 <<1 ) | (0 <<2 ), +}; + +static struct omap_board_config_kernel palmtt_config[] = { + {OMAP_TAG_USB , &palmtt_usb_config }, + {OMAP_TAG_LCD , &palmtt_lcd_config }, + {OMAP_TAG_UART , &palmtt_uart_config }, +}; + +static void __init omap_mpu_wdt_mode (int mode) { +if (mode) +omap_writew (0x8000 ,OMAP_WDT_TIMER_MODE ); +else { +omap_writew (0x00f5 ,OMAP_WDT_TIMER_MODE ); +omap_writew (0x00a0 ,OMAP_WDT_TIMER_MODE ); + } +} + +static void __init omap_palmtt_init (void ) +{ +omap_mpu_wdt_mode (0 ); + + omap_board_config = palmtt_config; + omap_board_config_size =ARRAY_SIZE (palmtt_config); + +platform_add_devices (palmtt_devices,ARRAY_SIZE (palmtt_devices)); + +spi_register_board_info (palmtt_boardinfo,ARRAY_SIZE (palmtt_boardinfo)); +omap_serial_init (); +} + +static void __init omap_palmtt_map_io (void ) +{ +omap1_map_common_io (); +} + +MACHINE_START (OMAP_PALMTT ,"OMAP1510 based Palm Tungsten|T" ) + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_palmtt_map_io, + .init_irq = omap_palmtt_init_irq, + .init_machine = omap_palmtt_init, + .timer = &omap_timer, +MACHINE_END
arch/arm/mach-omap1/Kconfig +9 -0
@@ -98,6 +98,15 @@ http://hackndev.com/palm/z71 for more informations. Say Y here if you have such a PDA, say N otherwise. +config MACH_OMAP_PALMTT + bool "Palm Tungsten|T" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Palm Tungsten|T PDA. To boot the kernel, you'll + need a PalmOS compatible bootloader (Garux); check out + http://www.hackndev.com/palm/tt/ for more information. + Say Y here if you have this PDA model, say N otherwise. + config MACH_NOKIA770 bool "Nokia 770" depends on ARCH_OMAP1 && ARCH_OMAP16XX
arch/arm/mach-omap1/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o +obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o
include/asm-arm/arch-omap/board-palmtt.h +23 -0
@@ -0,0 +1,23 @@ +/* +* linux/include/asm-arm/arch-omap/board-palmte.h +* +* Hardware definitions for the Palm Tungsten|T device. +* +* Maintainters : Marek Vasut <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __OMAP_BOARD_PALMTT_H +#define __OMAP_BOARD_PALMTT_H + +#define PALMTT_USBDETECT_GPIO 0 +#define PALMTT_CABLE_GPIO 1 +#define PALMTT_LED_GPIO 3 +#define PALMTT_PENIRQ_GPIO 6 +#define PALMTT_MMC_WP_GPIO 8 +#define PALMTT_HDQ_GPIO 11 + +#endif /* __OMAP_BOARD_PALMTT_H */
include/asm-arm/arch-omap/hardware.h +4 -0
@@ -342,6 +342,10 @@#include "board-palmz71.h" #endif +#ifdef CONFIG_MACH_OMAP_PALMTT +#include "board-palmtt.h" +#endif +#endif /* !__ASSEMBLER__ */ #endif /* __ASM_ARCH_OMAP_HARDWARE_H */