usb-storage data errors
Hi all :)
I'm having a problem with usb-storage devices under:
- Two different kernels: 2.4.31 (vanilla) and 2.6.17 (Ubuntu).
- Two different USB 2.0 cards (ALi chipset and VIA chipset).
- So, two different drivers (OHCI and EHCI).
- Two different usb-storage adapters (an external USB box from an unknown manufacturer and Conceptronic CIDE23U). Both are USB-to-IDE adapters.
- Many different hard disks.
- Both vfat and ext2/3 filesystems.
- Perfect RAM (at least, that's what memtest says).
- Correctly cooled system.
The problem is the following: whenever I copy a lot of data to
the usb-storage device (more than a few GB's), the copy goes OK, without an error, but when I compare the copied files with the original files, sometimes a copied file is different. This does not happen if I copy the files one by one, and it doesn't happens all the time, sometimes the copy is perfect.
In addition to this, from time to time the usb-storage adapters
(any of them, with any of the USB cards and any kernel) report a read error, telling that some sector could not be read. This is false because if I repeat the operation, the sector is correctly retrieved. This can be related to some kind of timing problem, I don't know.
The fact is that I cannot reproduce the problem reliably, so I
cannot give you a "recipe", except that it happens when I copy a lot of data at a time.
Any suggestion about how to narrow the problem down? Any more
data that you may need? A known bug? Am I doing any stupidity?
Thanks a lot in advance :)
Raúl Núñez de Arenas Coronado
Signature · 2 lines
Linux Registered User 88736 | http://www.dervishd.net It's my PC and I'll cry if I want to... RAmen!
Quoted 9 lines · DervishD
- Two different usb-storage adapters (an external USB box from an unknown manufacturer and Conceptronic CIDE23U). Both are USB-to-IDE adapters.
In addition to this, from time to time the usb-storage adapters
(any of them, with any of the USB cards and any kernel) report a read error, telling that some sector could not be read. This is false because if I repeat the operation, the sector is correctly retrieved. This can be related to some kind of timing problem, I don't know.
Try with some real USB storage device instead of a USB-to-IDE converter.
-`J'
Hi Jan :)
* Jan Engelhardt <[email protected]> dixit:
Quoted 5 lines · DervishD
Quoted 4 lines
- Two different usb-storage adapters (an external USB box from an unknown manufacturer and Conceptronic CIDE23U). Both are USB-to-IDE adapters.
Quoted 7 lines
Quoted 5 lines
In addition to this, from time to time the usb-storage adapters
(any of them, with any of the USB cards and any kernel) report a read error, telling that some sector could not be read. This is false because if I repeat the operation, the sector is correctly retrieved. This can be related to some kind of timing problem, I don't know.Try with some real USB storage device instead of a USB-to-IDE converter.
I did a couple of tests using a Kingstong Traveller USB key, with
same results. I'm retesting with a rather shorter cable. I'll post here the results if the error doesn't dissappear. By now, no errors with the short cable.
Thanks for the suggestion, Jan :)
Raúl Núñez de Arenas Coronado
Signature · 2 lines
Linux Registered User 88736 | http://www.dervishd.net It's my PC and I'll cry if I want to... RAmen!