Skip to contentSkip to conversation

ccid3: Fix bug in calculation of first t_nom and first t_ipi

PATCH In review Arnaldo Carvalho de Melo 1 participant 1 message Nov 27, 2006 Networking

lore
Share & tools
lore
#0 lore raw

PATCH 1/8 ccid3: Fix bug in calculation of first t_nom and first t_ipi

Problem:
--------
Currently the inter-packet-interval for the first packet is set to 500msec instead of the 1 second specified in RFC 3448 (detailed derivation below). Furthermore t_ipi is added twice to t_now instead of just once.

Solution:
---------
This patch
* sets the initial value of t_ipi to 1 second, as per [RFC 3448, 4.2]
* simplifies the initial setting of t_ipi and t_delta through a case analysis

Detailed Derivation:
--------------------
When the first CCID 3 packet is sent in ccid3_hc_tx_send_packet, t_ipi is set to

		hctx->ccid3hctx_t_ipi = TFRC_INITIAL_IPI;

which is USEC_PER_SEC / 4 = 250 msec. This is then added twice to t_0, due to:

	case TFRC_SSTATE_NO_SENT:
		// ...
		/* Set nominal send time for initial packet */
		hctx->ccid3hctx_t_nom = now;
		timeval_add_usecs(&hctx->ccid3hctx_t_nom, hctx->ccid3hctx_t_ipi);
		rc = 0;
		break;
	// ...
	/* Can we send? if so add options and add to packet history */
	if (rc = 0) {
		// ...
		timeval_add_usecs(&hctx->ccid3hctx_t_nom, hctx->ccid3hctx_t_ipi);
	}

As a result, t_1 = t_0 + t_ipi = t_now + t_ipi

                  = t_0 + 500msec

This contradicts RFC 3448, due to the following requirements:

a) Section 4.2, "Sender Initialization"
"the value of X[/s] is set to 1 packet/second [...] The
initial values for R (RTT) and t_RTO are undefined"

b) Section 4.5, "Preventing Oscillations
R_sqmean is undefined since R is undefined
Therefore, X_init = X

c) Section 4.6, "Scheduling of Packet Transmissions"

t_ipi = X_init / s = 1 second

A further simplification is possible for the initial `delta' value, which is defined in [RFC 3448, section 4.6] as

t_delta = min(t_ipi/2, t_gran/2)

t_gran/2 here is TFRC_OPSYS_HALF_TIME_GRAN = USEC_PER_SEC / (2 * HZ). Since Linux always schedules with a higher granularity than 1 second, the initial value of t_delta is thus simply

t_delta = min(USEC_PER_SEC / 2 , USEC_PER_SEC / (2 * HZ))
= USEC_PER_SEC / (2 * HZ)

Lastly, TFRC_INITIAL_IPI is not referenced anywhere else and can thus be removed.

---
 net/dccp/ccids/ccid3.c |   11 ++++++-----
 net/dccp/ccids/ccid3.h |    2 --
 2 files changed, 6 insertions(+), 7 deletions(-)
net/dccp/ccids/ccid3.c +6 -5
index fb21f2d..d7b688e 100644
@@ -298,13 +298,14 @@ static int ccid3_hc_tx_send_packet(struc
 		hctx->ccid3hctx_last_win_count	 = 0;
 		hctx->ccid3hctx_t_last_win_count = now;
 		ccid3_hc_tx_set_state(sk, TFRC_SSTATE_NO_FBACK);
-		hctx->ccid3hctx_t_ipi = TFRC_INITIAL_IPI;
 
-		/* Set nominal send time for initial packet */
+		/* First timeout, according to [RFC 3448, 4.2], is 1 second */
+		hctx->ccid3hctx_t_ipi = USEC_PER_SEC;
+		/* Initial delta: minimum of 0.5 sec and t_gran/2 */
+		hctx->ccid3hctx_delta = TFRC_OPSYS_HALF_TIME_GRAN;
+
+		/* Set t_0 for initial packet */
 		hctx->ccid3hctx_t_nom = now;
-		timeval_add_usecs(&hctx->ccid3hctx_t_nom,
-				  hctx->ccid3hctx_t_ipi);
-		ccid3_calc_new_delta(hctx);
 		rc = 0;
 		break;
 	case TFRC_SSTATE_NO_FBACK:
net/dccp/ccids/ccid3.h +0 -2
index e2e43c1..4621652 100644
@@ -49,8 +49,6 @@ #define TFRC_MAX_PACKET_SIZE	65535
 /* Two seconds as per CCID3 spec */
 #define TFRC_INITIAL_TIMEOUT	   (2 * USEC_PER_SEC)
 
-#define TFRC_INITIAL_IPI	   (USEC_PER_SEC / 4)
-
 /* In usecs - half the scheduling granularity as per RFC3448 4.6 */
 #define TFRC_OPSYS_HALF_TIME_GRAN  (USEC_PER_SEC / (2 * HZ))
 
Signature · 1 line
1.4.2.1.g3d5c