Skip to contentSkip to conversation

what should i do (for uboot1.1.2): *** [depend] Error 2

U-Boot-Users wanghf at keylab.net 2 participants 2 messages Dec 13, 2006

lore
Share & tools
lore
#0 lore raw

Hi,everyone,I ran "make"command to U-BOOT1.1.2 after the "make clean" and"make lubbock_config" commands ,but the PC(linux2.4.20)showed the information as followed:
make[1]: Entering directory `/usr/u-boot-1.1.2wang/post'
make[1]: `.depend' is up to date.
make[1]: Leaving directory `/usr/u-boot-1.1.2wang/post'
make[1]: Entering directory `/usr/u-boot-1.1.2wang/post/cpu'
make[1]: *** No rule to make target asm.S', needed by .depend'. Stop.
make[1]: Leaving directory `/usr/u-boot-1.1.2wang/post/cpu'
make: *** [depend] Error 2
Please do advice.
Regards, haifeng wang

#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

Content-Type: text/plain; charset="gb2312"
Content-Transfer-Encoding: base64

Quoted 11 lines

SGksZXZlcnlvbmUsSSByYW4gIm1ha2UiY29tbWFuZCB0byBVLUJPT1QxLjEuMiBhZnRlciB0aGUg Im1ha2UgY2xlYW4iIGFuZCJtYWtlIGx1YmJvY2tfY29uZmlnIiBjb21tYW5kcyAsYnV0IHRoZSBQ QyhsaW51eDIuNC4yMClzaG93ZWQgdGhlIGluZm9ybWF0aW9uIGFzIGZvbGxvd2VkOg0KbWFrZVsx XTogRW50ZXJpbmcgZGlyZWN0b3J5IGAvdXNyL3UtYm9vdC0xLjEuMndhbmcvcG9zdCcNCm1ha2Vb MV06IGAuZGVwZW5kJyBpcyB1cCB0byBkYXRlLg0KbWFrZVsxXTogTGVhdmluZyBkaXJlY3Rvcnkg YC91c3IvdS1ib290LTEuMS4yd2FuZy9wb3N0Jw0KbWFrZVsxXTogRW50ZXJpbmcgZGlyZWN0b3J5 IGAvdXNyL3UtYm9vdC0xLjEuMndhbmcvcG9zdC9jcHUnDQptYWtlWzFdOiAqKiogTm8gcnVsZSB0 byBtYWtlIHRhcmdldCBgYXNtLlMnLCBuZWVkZWQgYnkgYC5kZXBlbmQnLiAgU3RvcC4NCm1ha2Vb MV06IExlYXZpbmcgZGlyZWN0b3J5IGAvdXNyL3UtYm9vdC0xLjEuMndhbmcvcG9zdC9jcHUnDQpt YWtlOiAqKiogW2RlcGVuZF0gRXJyb3IgMg0KUGxlYXNlIGRvIGFkdmljZS4NCiBSZWdhcmRzLCBo YWlmZW5nIHdhbmc=

Please do not send base 64 encoded messages.

Please do not send HTML messages.

Please send plain text only.

Message unreadable, ignored. Sorry.