PROBLEM: PHY probe not working properly for ibm_emac (PPC4xx)
[1.] One line summary of the problem:
PHY probe not working properly for ibm_emac (PPC4xx)
[2.] Full description of the problem/report:
I have a system with AMCC PowerPC 405EP and PHY Intel LXT971A. Linux 2.6.18.3 is not able to detect the PHY ID correctly. The PHY ID detected is 0, but should be 0x1d.
This is because phy_read() (__emac_mdio_read() resp.) from drivers/net/ibm_emac/ibm_emac_core.c might return -ETIMEDOUT or -EREMOTEIO on error. This is ignored inside the
int mii_phy_probe(struct mii_phy *phy, int address) from drivers/net/ibm_emac/ibm_emac_phy.c
as the return value is assigned to an u32 variable. Please consider the patch below ...
[3.] Keywords:
networking, kernel, problem, ibm_emac, ppc4xx, phy
[4.] Kernel version (from /proc/version):
2.6.18.3
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
doesn't oops
[6.] A small shell script or example program which triggers the
problem (if possible)
none required
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
ELDK 3.1.1 from www.denx.org
[7.2.] Processor information (from /proc/cpuinfo):
AMCC' PowerPC 405EP
PHY Intel LXT971A
[X.] Patch:
net/ibm_emac/ibm_emac_phy.c (revision 69) renamed from net/ibm_emac/ibm_emac_phy.c (revision 67) +1 -1
@@ -309,7 +309,7 @@ { struct mii_phy_def *def; int i; - u32 id; + int id; phy->autoneg = AUTONEG_DISABLE; phy->advertising = 0;
@@ -324,6 +324,8 @@ /* Read ID and find matching entry */ id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy,
MII_PHYSID2);
+ if (id < 0)
+ return -ENODEV;
for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
if ((id & def->phy_id_mask) == def->phy_id)
break;Signature · 7 lines
Mgr. Hynek Petrak ----------------- S.W.A.C. Bohemia spol. s r.o. Heydukova 314, 38601 Strakonice tel: +420 3834181-36 or +49 (89) 613866-51 PGP key: http://www.swac.cz/~hynek/hp.pgp 5CAC 7712 CFFD D076 0D74 A134 1EFD 728C 84CB 94CF