bug: isicom: kobject_add failed for ttyM0 with -EEXIST
allyesconfig bzImage bootup produced 33 warning messages, of which the first couple are attached below.
Ingo
--------------->
Calling initcall 0xc0628d59: isicom_setup+0x0/0x315()kobject_add failed for ttyM0 with -EEXIST, don't try to register things with the same name in the same directory.
[<c0106273>] show_trace_log_lvl+0x34/0x4a [<c01063a9>] show_trace+0x2c/0x2e [<c01063d6>] dump_stack+0x2b/0x2d [<c04f06a3>] kobject_add+0x15f/0x187 [<c06e3421>] class_device_add+0xb5/0x45c [<c06e37e5>] class_device_register+0x1d/0x21 [<c06e3892>] class_device_create+0xa9/0xcc [<c05f8a5c>] tty_register_device+0xe3/0xea [<c05f97fa>] tty_register_driver+0x202/0x21e [<c0628fa3>] isicom_setup+0x24a/0x315 [<c0100567>] init+0x178/0x451 [<c0105feb>] kernel_thread_helper+0x7/0x10 ======================= kobject_add failed for ttyM1 with -EEXIST, don't try to register things with the same name in the same directory. [<c0106273>] show_trace_log_lvl+0x34/0x4a [<c01063a9>] show_trace+0x2c/0x2e [<c01063d6>] dump_stack+0x2b/0x2d [<c04f06a3>] kobject_add+0x15f/0x187 [<c06e3421>] class_device_add+0xb5/0x45c [<c06e37e5>] class_device_register+0x1d/0x21 [<c06e3892>] class_device_create+0xa9/0xcc [<c05f8a5c>] tty_register_device+0xe3/0xea [<c05f97fa>] tty_register_driver+0x202/0x21e [<c0628fa3>] isicom_setup+0x24a/0x315 [<c0100567>] init+0x178/0x451 [<c0105feb>] kernel_thread_helper+0x7/0x10 ======================= kobject_add failed for ttyM2 with -EEXIST, don't try to register things with the same name in the same directory. [<c0106273>] show_trace_log_lvl+0x34/0x4a [<c01063a9>] show_trace+0x2c/0x2e [<c01063d6>] dump_stack+0x2b/0x2d [<c04f06a3>] kobject_add+0x15f/0x187 [<c06e3421>] class_device_add+0xb5/0x45c [<c06e37e5>] class_device_register+0x1d/0x21 [<c06e3892>] class_device_create+0xa9/0xcc [<c05f8a5c>] tty_register_device+0xe3/0xea [<c05f97fa>] tty_register_driver+0x202/0x21e [<c0628fa3>] isicom_setup+0x24a/0x315 [<c0100567>] init+0x178/0x451 [<c0105feb>] kernel_thread_helper+0x7/0x10 =======================
kobject_add failed for ttyM3 with -EEXIST, don't try to register things with the same name in the same directory.
Quoted 2 lines · Ingo Molnar
allyesconfig bzImage bootup produced 33 warning messages, of which the first couple are attached below.
With which kernel? mxser had ttyM for a long time, it should be fixed in 2.6.20-rc1.
Quoted 16 lines
--------------->
Calling initcall0xc0628d59: isicom_setup+0x0/0x315()kobject_addfailed for ttyM0 with-EEXIST, don't try to register things with the same name in the same directory.[<c0106273>] show_trace_log_lvl+0x34/0x4a [<c01063a9>] show_trace+0x2c/0x2e [<c01063d6>] dump_stack+0x2b/0x2d [<c04f06a3>] kobject_add+0x15f/0x187 [<c06e3421>] class_device_add+0xb5/0x45c [<c06e37e5>] class_device_register+0x1d/0x21 [<c06e3892>] class_device_create+0xa9/0xcc [<c05f8a5c>] tty_register_device+0xe3/0xea [<c05f97fa>] tty_register_driver+0x202/0x21e [<c0628fa3>] isicom_setup+0x24a/0x315 [<c0100567>] init+0x178/0x451 [<c0105feb>] kernel_thread_helper+0x7/0x10 =======================
[...]
regards,
Signature · 4 lines
http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Quoted 6 lines · Jiri Slaby
Quoted 2 lines · Ingo Molnar
allyesconfig bzImage bootup produced 33 warning messages, of which the first couple are attached below.
With which kernel? mxser had ttyM for a long time, it should be fixed in 2.6.20-rc1.
current -git.
Ingo
Quoted 9 lines · Ingo Molnar
Quoted 5 lines · Jiri Slaby
Quoted 2 lines · Ingo Molnar
allyesconfig bzImage bootup produced 33 warning messages, of which the first couple are attached below.
With which kernel? mxser had ttyM for a long time, it should be fixed in 2.6.20-rc1.
current -git.
Ok, thanks, I'll check it,
Signature · 4 lines
http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Quoted 9 lines · Ingo Molnar
Quoted 5 lines · Jiri Slaby
Quoted 2 lines · Ingo Molnar
allyesconfig bzImage bootup produced 33 warning messages, of which the first couple are attached below.
With which kernel? mxser had ttyM for a long time, it should be fixed in 2.6.20-rc1.
current -git.
It's rather impossible. Aren't you seeked somewhere (I'm in 825020c3866e7312947e17a0caa9dd1a5622bafc now)?
Calling initcall 0xc0628d59: isicom_setup+0x0/0x315()kobject_add failed for ttyM0 with -EEXIST, don't try to register things with the same name in the same directory.
[<c0106273>] show_trace_log_lvl+0x34/0x4a [<c01063a9>] show_trace+0x2c/0x2e [<c01063d6>] dump_stack+0x2b/0x2d [<c04f06a3>] kobject_add+0x15f/0x187 [<c06e3421>] class_device_add+0xb5/0x45c [<c06e37e5>] class_device_register+0x1d/0x21 [<c06e3892>] class_device_create+0xa9/0xcc [<c05f8a5c>] tty_register_device+0xe3/0xea
Can't be called from tty_register_driver, since !(driver->flags & TTY_DRIVER_DYNAMIC_DEV) is false in
http://www.linux-m32r.org/lxr/http/source/drivers/char/tty_io.c#L3756
[<c05f97fa>] tty_register_driver+0x202/0x21e [<c0628fa3>] isicom_setup+0x24a/0x315
Is no longer in the isicom driver.
[<c0100567>] init+0x178/0x451 [<c0105feb>] kernel_thread_helper+0x7/0x10 =======================
regards,
Signature · 4 lines
http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Quoted 6 lines · Jiri Slaby
Quoted 5 lines · Ingo Molnar
Quoted 3 lines · Jiri Slaby
Quoted 2 lines · Ingo Molnar
allyesconfig bzImage bootup produced 33 warning messages, of which the first couple are attached below.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
With which kernel? mxser had ttyM for a long time, it should be fixed in 2.6.20-rc1.
current -git.
It's rather impossible. Aren't you seeked somewhere (I'm in
825020c3866e7312947e17a0caa9dd1a5622bafcnow)?
indeed it was a v2.6.19 base - sorry! I'll re-report if there's any problem left.
Ingo