Skip to contentSkip to conversation

Yenta Cardbus allocation failure

solved Chuck Ebbert 2 participants 2 messages Dec 19, 2006

lore
Share & tools
lore
#0 lore raw

In-Reply-To: <[email protected]>

Quoted 18 lines · Markus Rechberger

I went on with investigating that problem and found the problem, though I'm not sure if that solution is acceptable..

seems like the memory range gets preallocated in setup-bus.c, and CARDBUS_MEM_SIZE defines that size.

I changed
#define CARDBUS_MEM_SIZE (32*1024*1024)
to
#define CARDBUS_MEM_SIZE (48*1024*1024)

and now the system is able to allocate the resources for the 3rd pci/pcmcia function.

Can anyone please have a closer look at it too? I think the whole implementation isn't really good there..

so this is the new output of iomem:

Quoted 9 lines
$ cat /proc/iomem
...
30000000-35ffffff : PCI Bus #02
  30000000-32ffffff : PCI CardBus #03
36000000-360003ff : 0000:00:1f.1
39000000-3bffffff : PCI CardBus #03
  39000000-39ffffff : 0000:03:00.0
  3a000000-3affffff : 0000:03:00.1
  3b000000-3bffffff : 0000:03:00.2 <- this one failed to allocate previously

Wow, 3 regions of 16MB each! Your change fixes this problem for you, but what if someone needs four such regions?

Signature · 1 line
MBTI: IXTP
#1 lore raw
Quoted 31 lines · Chuck Ebbert

In-Reply-To: <[email protected]>

Quoted 18 lines · Markus Rechberger

I went on with investigating that problem and found the problem, though I'm not sure if that solution is acceptable..

seems like the memory range gets preallocated in setup-bus.c, and CARDBUS_MEM_SIZE defines that size.

I changed
#define CARDBUS_MEM_SIZE (32*1024*1024)
to
#define CARDBUS_MEM_SIZE (48*1024*1024)

and now the system is able to allocate the resources for the 3rd pci/pcmcia function.

Can anyone please have a closer look at it too? I think the whole implementation isn't really good there..

so this is the new output of iomem:

Quoted 9 lines
$ cat /proc/iomem
...
30000000-35ffffff : PCI Bus #02
  30000000-32ffffff : PCI CardBus #03
36000000-360003ff : 0000:00:1f.1
39000000-3bffffff : PCI CardBus #03
  39000000-39ffffff : 0000:03:00.0
  3a000000-3affffff : 0000:03:00.1
  3b000000-3bffffff : 0000:03:00.2 <- this one failed to allocate
Quoted 5 lines

previously

Wow, 3 regions of 16MB each! Your change fixes this problem for you, but what if someone needs four such regions?

I documented everything I found about that issue (even the allocated resources in window$)
http://linuxtv.org/v4lwiki/index.php/Talk:Pinnacle/310c#PCI_allocation_failed

that's why I wrote that the current implementation isn't nice.. I'm currently on the cx88 driver (which needs that memory region) to get my Pinnacle Cardbus device work..
I won't get back to the PCI subsystem before I'm done with it.

Markus