Skip to contentSkip to conversation

Implementation of acpi_video_get_next_level()

PATCH Applied [email protected] 2 participants 2 messages Dec 19, 2006 – Dec 20, 2006 ACPI

lore
Share & tools
lore
#0 lore raw

PATCH 8/19 Implementation of acpi_video_get_next_level()

From: Thomas Tuttle <[email protected]>

acpi_video_get_next_level was supposed to implement an algorithm to select a new brightness level based on the old brightness level of an ACPI video device, but it simply says "/* Fix me */" and returns the current brightness.

This patch implements acpi_video_get_next_level properly. It had to change a few constants at the top of the file because they were (apparently) wrong, but it appears to work on my Dell Inspiron e1405 (with BIOS A05 only--BIOS A04 doesn't seem to send ACPI video hotkey events).

---

 drivers/acpi/video.c |   41 ++++++++++++++++++++++++++++++++++-------
 1 files changed, 34 insertions(+), 7 deletions(-)
drivers/acpi/video.c renamed from drivers/acpi/video.c~implementation-of-acpi_video_get_next_level +34 -7
diff -puN drivers/acpi/video.c~implementation-of-acpi_video_get_next_level drivers/acpi/video.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2004 Luming Yu <[email protected]>
  *  Copyright (C) 2004 Bruno Ducrot <[email protected]>
+ *  Copyright (C) 2006 Thomas Tuttle <[email protected]>
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *
@@ -47,11 +48,11 @@
 #define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT	0x83
 #define ACPI_VIDEO_NOTIFY_PREV_OUTPUT	0x84
 
-#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS	0x82
-#define	ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS	0x83
-#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS	0x84
-#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS	0x85
-#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF		0x86
+#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS	0x85
+#define	ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS	0x86
+#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS	0x87
+#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS	0x88
+#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF		0x89
 
 #define ACPI_VIDEO_HEAD_INVALID		(~0u - 1)
 #define ACPI_VIDEO_HEAD_END		(~0u)
@@ -1502,8 +1503,34 @@ static int
 acpi_video_get_next_level(struct acpi_video_device *device,
 			  u32 level_current, u32 event)
 {
-	/*Fix me */
-	return level_current;
+	int min, max, min_above, max_below, i, l;
+	max = max_below = 0;
+	min = min_above = 255;
+	for (i = 0; i < device->brightness->count; i++) {
+		l = device->brightness->levels[i];
+		if (l < min)
+			min = l;
+		if (l > max)
+			max = l;
+		if (l < min_above && l > level_current)
+			min_above = l;
+		if (l > max_below && l < level_current)
+			max_below = l;
+	}
+
+	switch (event) {
+	case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS:
+		return (level_current < max) ? min_above : min;
+	case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS:
+		return (level_current < max) ? min_above : max;
+	case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS:
+		return (level_current > min) ? max_below : min;
+	case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS:
+	case ACPI_VIDEO_NOTIFY_DISPLAY_OFF:
+		return 0;
+	default:
+		return level_current;
+	}
 }
 
 static void

_

reviewer Applied
#1 lore raw

Applied.

thanks,
-Len

Quoted 88 lines · On Tuesday 19 December 2006 15:56, [email protected] wrote:

From: Thomas Tuttle <[email protected]>

acpi_video_get_next_level was supposed to implement an algorithm to select a new brightness level based on the old brightness level of an ACPI video device, but it simply says "/* Fix me */" and returns the current brightness.

This patch implements acpi_video_get_next_level properly. It had to change a few constants at the top of the file because they were (apparently) wrong, but it appears to work on my Dell Inspiron e1405 (with BIOS A05 only--BIOS A04 doesn't seem to send ACPI video hotkey events).

---

 drivers/acpi/video.c |   41 ++++++++++++++++++++++++++++++++++-------
 1 files changed, 34 insertions(+), 7 deletions(-)

diff -puN drivers/acpi/video.c~implementation-of-acpi_video_get_next_level drivers/acpi/video.c

drivers/acpi/video.c renamed from drivers/acpi/video.c~implementation-of-acpi_video_get_next_level +34 -7
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2004 Luming Yu <[email protected]>
  *  Copyright (C) 2004 Bruno Ducrot <[email protected]>
+ *  Copyright (C) 2006 Thomas Tuttle <[email protected]>
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *
@@ -47,11 +48,11 @@
 #define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT	0x83
 #define ACPI_VIDEO_NOTIFY_PREV_OUTPUT	0x84
 
-#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS	0x82
-#define	ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS	0x83
-#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS	0x84
-#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS	0x85
-#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF		0x86
+#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS	0x85
+#define	ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS	0x86
+#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS	0x87
+#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS	0x88
+#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF		0x89
 
 #define ACPI_VIDEO_HEAD_INVALID		(~0u - 1)
 #define ACPI_VIDEO_HEAD_END		(~0u)
@@ -1502,8 +1503,34 @@ static int
 acpi_video_get_next_level(struct acpi_video_device *device,
 			  u32 level_current, u32 event)
 {
-	/*Fix me */
-	return level_current;
+	int min, max, min_above, max_below, i, l;
+	max = max_below = 0;
+	min = min_above = 255;
+	for (i = 0; i < device->brightness->count; i++) {
+		l = device->brightness->levels[i];
+		if (l < min)
+			min = l;
+		if (l > max)
+			max = l;
+		if (l < min_above && l > level_current)
+			min_above = l;
+		if (l > max_below && l < level_current)
+			max_below = l;
+	}
+
+	switch (event) {
+	case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS:
+		return (level_current < max) ? min_above : min;
+	case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS:
+		return (level_current < max) ? min_above : max;
+	case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS:
+		return (level_current > min) ? max_below : min;
+	case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS:
+	case ACPI_VIDEO_NOTIFY_DISPLAY_OFF:
+		return 0;
+	default:
+		return level_current;
+	}
 }
 
 static void

_