Skip to contentSkip to conversation

IDE discovered as SATA - 2.6.20-rc4

DISCUSSION Dimitar G. Katerinski 2 participants 2 messages Jan 8, 2007

lore
Share & tools
lore
#0 lore raw

Hi,

Sorry if I'm duplicating the issue, but I've searched the list and didn't find a similar report. I've just compiled 2.6.20-rc4 and I have trouble booting. After some investigation, I find out that my IDE chipset is being discovered as SATA, so my hard drive is not /dev/hda, but /dev/sda. When I passed the correct root=/dev/sdaX option to the kernel, it booted fine and everything seems to be working. But it puzzles me why, this motherboard doesn't even have a SATA chipset. Is this abug or a new feature? :) My IDE chipset is:

00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)

Regards,
DImitar G. Katerinski

Signature · 1 line
http://tropot.net/photoblog/ - my life. in pictures.
#1 lore raw
Quoted 1 line · Dimitar G. Katerinski

After some investigation, I find out that my IDE chipset is being discovered as SATA, so my hard drive is not /dev/hda, but /dev/sda.

It seems you compiled in support for "PATA", more specifically for:

Quoted 1 line

00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)

"<*> AMD/NVidia PATA support (Experimental)"

in the "Serial ATA (prod) and Parallel ATA (experimental) drivers" menu under "Device Drivers". PATA is what is also known as IDE and the PATA drivers are a new set of IDE drivers, using the same infrastructure as SCSI and SATA (and USB, and ..). Yes, they're newly integrated in 2.6.20. One of the advatages of these new drivers are better error handling than the old IDE driver.

I'm using that same specific driver by the way (on amd756) and it's working very nicely for me.

Rene.